Introduction
Thank you for choosing the SEENDA 2.4G Wireless Backlit Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard to ensure optimal performance and longevity. Please read this manual carefully before use and retain it for future reference.
Package Contents
Please check the package contents upon unboxing:
- SEENDA 2.4G Wireless Backlit Keyboard
- USB 2.4G Receiver
- USB Charging Cable
- User Manual
Setup
- Charge the Keyboard: Before first use, fully charge the keyboard using the provided USB charging cable. Connect the cable to the keyboard's charging port and a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator LED will show the charging status. A full charge takes approximately 2 hours.
- Locate the USB Receiver: The 2.4G USB receiver is typically stored in a compartment on the back or side of the keyboard for safekeeping. Carefully remove it.
- Connect the Receiver: Plug the USB 2.4G receiver into an available USB port on your computer, laptop, or Smart TV. The system should automatically detect and install the necessary drivers. No additional software installation is required.
- Power On the Keyboard: Locate the power switch on the keyboard (usually on the side or back) and slide it to the 'ON' position. The keyboard will automatically connect to the receiver.


Operating Instructions
2.4G Wireless Connection
The keyboard utilizes 2.4 GHz wireless transmission technology, providing a stable and reliable connection up to 10 meters (33 feet) from the USB receiver. Ensure the receiver is within this range for optimal performance.
Backlight Control
The keyboard features a white LED backlight for improved visibility in low-light conditions. You can adjust the backlight brightness or turn it off:
- Toggle Backlight On/Off: Press the Fn key + Bloc Scorr (Scroll Lock) key to turn the backlight on or off.
- Adjust Brightness: Press the Fn key + Pag ↑ (Page Up) to increase backlight brightness. Press the Fn key + Pag ↓ (Page Down) to decrease backlight brightness. There are typically 3 levels of brightness.


Charging the Keyboard
The keyboard has a built-in 1600 mAh rechargeable battery. When the battery is low, the low battery indicator LED will illuminate. Connect the keyboard to a USB power source using the provided USB cable to recharge. A full charge provides approximately 90 hours of usage.
Special Function Keys (Fn Combinations)
The keyboard includes various function keys that can be accessed by pressing the Fn key in combination with other keys. These functions may include media control, volume adjustment, and other system shortcuts. Refer to the keycap legends for specific functions.

Maintenance
- Cleaning: Use a soft, dry cloth to clean the keyboard surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the keyboard. Avoid harsh chemicals or abrasive cleaners.
- Storage: When not in use for extended periods, turn off the keyboard to conserve battery life. Store the USB receiver in its dedicated compartment to prevent loss.
- Battery Care: To prolong battery life, avoid fully discharging the keyboard frequently. Recharge it when the low battery indicator appears.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keyboard not responding | Keyboard is off; Low battery; USB receiver not connected or faulty; Out of range. | Ensure keyboard is on; Charge the keyboard; Re-plug the USB receiver into a different port; Move keyboard closer to receiver (within 10m). |
| Backlight not working | Backlight is off; Low battery. | Press Fn + Bloc Scorr to toggle backlight; Charge the keyboard. |
| Keys are sticky or unresponsive | Dirt or debris under keycap; Key mechanism issue. | Clean around the affected key with compressed air; If issue persists, contact customer support. |
| Connection drops frequently | Interference; Out of range; Low battery. | Move away from other wireless devices; Ensure keyboard is within 10m of receiver; Charge the keyboard. |
Specifications
- Brand: seenda
- Model: B093C55JV2
- Connectivity: 2.4G Wireless (USB Receiver)
- Layout: Italian QWERTY
- Backlight: White LED, 3 adjustable brightness levels
- Battery: 1600 mAh Rechargeable Lithium-ion
- Charging Time: Approximately 2 hours
- Usage Time: Up to 90 hours (with backlight off)
- Operating Range: Up to 10 meters (33 feet)
- Key Type: Scissor-foot design
- Compatibility: Windows PC, Laptops, Tablets, Smart TVs
- Dimensions: 44.5 x 13.6 x 4.7 cm (17.5 x 5.3 x 1.8 inches)
- Weight: 790 g (1.74 lbs)
- Included Components: Keyboard, USB Receiver, USB Charging Cable

Warranty and Support
SEENDA products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official SEENDA website. Please have your product model (B093C55JV2) and purchase date ready when contacting support.





