Satco S11419

Satco S11419 A19 LED Light Bulbs User Manual

Model: S11419 | Brand: Satco

Introduction

This manual provides essential information for the safe and efficient use of your Satco S11419 14-Watt A19 LED Light Bulbs. These energy-efficient lamps are designed as a direct replacement for 60-watt incandescent bulbs, offering 5000K natural light and 1600 lumens of brightness. They are suitable for various applications, including residential and commercial settings.

Ten Satco S11419 A19 LED light bulbs in a pack

Image: A pack of ten Satco S11419 A19 LED light bulbs, showcasing their standard A19 shape and E26 medium base.

Important Safety Information

  • Risk of Electric Shock: Always turn off power to the fixture before installing or removing the bulb.
  • Do Not Disassemble: Do not attempt to disassemble or modify the bulb. There are no user-serviceable parts inside.
  • Operating Environment: Suitable for indoor use and damp locations. Approved for totally enclosed fixtures.
  • Voltage Compatibility: Ensure the fixture's voltage is compatible with the bulb's 120V rating.
  • Disposal: Dispose of bulbs according to local regulations. Do not dispose of with general household waste.

Setup and Installation

Installing your Satco S11419 LED light bulbs is a straightforward process. Follow these steps carefully to ensure proper installation and operation.

  1. Power Off: Before installation, ensure the power supply to the light fixture is turned off at the circuit breaker or wall switch.
  2. Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
  3. Insert New Bulb: Screw the Satco S11419 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
  4. Restore Power: Turn the power supply back on at the circuit breaker or wall switch.
  5. Test: Turn on the light switch to confirm the bulb is functioning correctly.
A single Satco S11419 A19 LED light bulb

Image: A close-up view of a single Satco S11419 A19 LED light bulb, highlighting its design and E26 base.

Operating Instructions

These LED bulbs are designed for simple operation.

  • On/Off Function: The bulb operates like a traditional incandescent bulb. Use your existing wall switch to turn the light on or off.
  • Non-Dimmable: Please note that these bulbs are non-dimmable. Do not use them with dimmer switches, as this may cause damage to the bulb or the dimmer.
  • Instant On: These LED bulbs provide instant full brightness with no warm-up time.
Indoor living room with wall sconces and ambient lighting

Image: An example of indoor residential lighting, demonstrating the application of these bulbs in a living space.

Maintenance and Care

Satco S11419 LED bulbs require minimal maintenance due to their long lifespan.

  • Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Replacement: With an average rated life of 10,000 hours, frequent replacement is not necessary. Replace the bulb only when it ceases to function.
  • Storage: If storing unused bulbs, keep them in their original packaging in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up.No power to the fixture.
Bulb not screwed in properly.
Bulb is faulty.		Check circuit breaker and wall switch.
Turn off power, then re-screw bulb firmly.
Replace with a new bulb.
Bulb flickers or dims.Used with a dimmer switch.
Loose connection.
Incompatible fixture.		These bulbs are non-dimmable; remove from dimmer circuit.
Turn off power, then re-screw bulb firmly.
Ensure fixture is compatible with LED bulbs.
Bulb is too hot.Improper ventilation in fixture.
Exceeding recommended operating temperature.		Ensure fixture allows for adequate airflow. While approved for enclosed fixtures, extreme heat can reduce lifespan.

Product Specifications

Satco S11419 A19 LED light bulb with dimensions

Image: Dimensions of the Satco S11419 A19 LED light bulb, showing a length of 4.57 inches (116.08mm) and a diameter of 2.36 inches (59.94mm).

  • Model: S11419
  • Brand: Satco
  • Light Type: LED
  • Bulb Shape Size: A19
  • Bulb Base: E26 Medium
  • Wattage: 14 Watts
  • Incandescent Equivalent: 60 Watts
  • Brightness: 1600 Lumens
  • Color Temperature: 5000 Kelvin (Natural Light)
  • Voltage: 120 Volts
  • Average Life: 10,000 Hours
  • Dimmable: No (Non-Dimmable)
  • Indoor/Outdoor Usage: Indoor (Approved for damp locations and totally enclosed fixtures)
  • Material: Polybutylene Terephtalate (PBT)
  • Dimensions (Bulb): 4.57 inches (116.08mm) length, 2.36 inches (59.94mm) diameter
  • Item Weight: 2.4 ounces (per bulb)
  • Quantity: 10 Count (Pack of 1)
  • UPC: 045923114199

Warranty Information

These Satco S11419 LED Light Bulbs come with a 3-year limited manufacturer warranty. For warranty claims or detailed terms and conditions, please refer to the official Satco website or contact their customer support.

Customer Support

For further assistance, technical support, or inquiries regarding your Satco S11419 LED Light Bulbs, please visit the official Satco website or contact their customer service department.

Satco Official Website: www.satco.com

© 2023 Satco. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.