SRJTEK LCD Screen Replacement for OnePlus Nord N10 5G

1. Introduction

This manual provides instructions for the installation of the SRJTEK LCD screen replacement for the OnePlus Nord N10 5G. This replacement screen is designed to repair broken or malfunctioning displays, restoring full functionality to your device.

1.1. Compatibility

This LCD display screen replacement is compatible with OnePlus Nord N10 5G models BE2029, BE2025, BE2026, and BE2028. It is designed for a perfect fit and original performance.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x LCD Display with Touch Screen for OnePlus Nord N10 5G
• 1 x Opening Tool Kit (various tools for disassembly)
• 1 x Adhesive

Figure 2.1: Included LCD Screen and Repair Tool Kit.

3. Safety Information

Performing electronic repairs requires caution. Please observe the following safety guidelines:

• Power Off Device: Always ensure your device is completely powered off before beginning any disassembly.
• Disconnect Battery: Disconnect the battery connector as one of the first steps to prevent electrical shorts.
• Static Discharge: Wear an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity, which can damage sensitive electronic components.
• Handle with Care: LCD screens and internal components are delicate. Avoid excessive force during installation or removal.
• Eye Protection: Consider wearing eye protection to guard against small flying debris.
• Non-Professional Installation: Non-professional installation is not recommended. If you are unsure, seek assistance from a qualified technician.

4. Setup and Pre-Installation Testing

Before fully installing the new screen, it is crucial to perform a test to ensure it is functioning correctly.

4.1. Pre-Installation Test

1. Connect the new screen's flex cables to the motherboard without fully installing the screen into the frame.
2. Reconnect the battery.
3. Power on the device.
4. Test the display for any abnormalities (e.g., dead pixels, lines, discoloration).
5. Test the touch functionality across the entire screen.
6. If the screen functions normally, proceed with the full installation. If any issues are observed, disconnect the screen and battery, then contact customer support.

Note: Do not remove any protective films or labels from the screen until you have completed the pre-installation test and are satisfied with its performance. Removing these may void the return policy.

5. Installation Instructions

Follow these steps carefully to replace the LCD screen on your OnePlus Nord N10 5G. Refer to the embedded video for visual guidance.

5.1. Video Guide

5.2. Step-by-Step Procedure

1. Remove SIM Card Tray: Use the SIM ejector tool to remove the SIM card tray from the side of the phone.
2. Remove Back Cover: Carefully use a prying tool (e.g., plastic spudger or guitar pick) to separate the back cover from the phone frame. Start from a corner and work your way around the edges.
3. Remove Mid-Frame Screws: Once the back cover is removed, locate and remove all screws securing the mid-frame. These are typically small Phillips head screws.
4. Remove Mid-Frame: Gently pry off the mid-frame, which often includes the camera module cover and fingerprint sensor bracket.
5. Disconnect Battery: Locate the battery connector on the motherboard and carefully disconnect it using a plastic prying tool.
6. Disconnect Flex Cables: Disconnect any other flex cables connected to the motherboard, such as the display cable and charging port cable.
7. Remove Main Board: Carefully remove the main motherboard from the device.
8. Remove Charging Port Board: Disconnect and remove the charging port board (sub PCB) located at the bottom of the phone.
9. Remove Battery: Use the pull tabs or a plastic prying tool to carefully remove the battery. Apply gentle, even pressure to avoid bending or puncturing the battery.
10. Clean Frame: Thoroughly clean the phone frame, removing any old adhesive residue or debris. This ensures proper seating of the new screen.
11. Install New Screen: Apply the provided adhesive to the phone frame. Carefully place the new LCD screen into the frame, ensuring it aligns correctly.
12. Reinstall Components: Reinstall all components in reverse order: battery, charging port board, main board, flex cables, mid-frame, mid-frame screws, and finally the back cover. Ensure all connectors are securely attached.
13. Power On and Final Test: Power on your device and perform a final comprehensive test of all screen functions, including touch, display quality, and brightness.

Figure 5.2: SRJTEK LCD Screen Replacement with Flex Cables.

6. Maintenance

To prolong the life and maintain the performance of your new screen, consider the following:

• Use a Screen Protector: Apply a high-quality screen protector to guard against scratches and minor impacts.
• Protective Case: Use a durable phone case to provide additional protection against drops.
• Avoid Extreme Conditions: Protect your device from extreme temperatures and direct sunlight, which can affect screen performance and battery life.
• Gentle Cleaning: Clean the screen with a soft, lint-free cloth. Avoid harsh chemicals or abrasive materials.

7. Troubleshooting

If you encounter issues after installation, refer to these common troubleshooting steps:

• Screen Not Working / Black Screen:
  • Ensure all flex cables are securely connected to the motherboard.
  • Verify the battery is properly connected and charged.
  • Perform a hard reset on your device (refer to your phone's user manual for specific instructions).
• Touch Functionality Issues:
  • Check for any debris or foreign objects between the screen and the frame.
  • Ensure the flex cables are not damaged or improperly seated.
• Display Quality Issues (e.g., lines, discoloration):
  • Recheck the display flex cable connection.
  • Ensure no pressure is being applied to the screen from internal components.

If problems persist after attempting these steps, or if the screen was broken or not working upon receipt, please contact SRJTEK customer support immediately for assistance.

8. Specifications

9. Warranty and Support

SRJTEK provides quality products. For any issues encountered with your screen replacement, such as breakage or malfunction upon receipt, please contact SRJTEK customer support immediately through Amazon or via the contact information provided on the outer packaging.

Please note that non-professional installation is not recommended. Damage caused by improper installation may not be covered. Always test the screen before full installation.