1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LogiLink BP0146 Dual Monitor Wall Mount. This product is designed to securely mount two flat or curved monitors ranging from 17 to 32 inches, offering flexible positioning through its integrated gas spring mechanism. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
- Ensure the wall structure can support the combined weight of the mount and two monitors (up to 9 kg per arm).
- Do not exceed the maximum weight capacity of 9 kg (19.8 lbs) per arm.
- Use appropriate mounting hardware for your specific wall type (wood stud, concrete, brick, etc.). Consult a professional if unsure.
- Keep children and pets away during installation.
- Tighten all screws firmly but do not overtighten to avoid stripping threads.
- Regularly check the mount for any signs of wear or loose connections.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.
Image: Various components of the LogiLink BP0146 dual monitor wall mount.
The package typically includes:
- Wall Plate
- Gas Spring Monitor Arms (2 units)
- VESA Monitor Plates (2 units)
- Mounting Hardware Kit (screws, anchors, washers, Allen keys)
- Instruction Manual
4. Installation Guide
4.1. Tools Required
- Pencil
- Drill
- Stud Finder (for wood stud installation)
- Level
- Phillips Head Screwdriver
- Socket Wrench (if applicable for lag bolts)
4.2. Wall Preparation and Wall Plate Installation
- Determine the desired mounting height for your monitors.
- Locate wall studs if mounting to wood, or ensure the concrete/brick wall is suitable.
- Position the wall plate against the wall at the desired height and use a level to ensure it is straight. Mark the drill holes with a pencil.
- Drill pilot holes according to the marked positions and wall type.
- Secure the wall plate to the wall using the provided screws and anchors (if necessary).
4.3. Arm Assembly and Monitor Attachment
Image: Monitor attached to the VESA plate on the arm.
- Attach the gas spring arms to the wall plate. Ensure they are securely fastened.
- Attach the VESA monitor plates to the back of your monitors using the appropriate screws from the hardware kit. The mount supports VESA patterns 75x75 mm and 100x100 mm.
- Carefully lift each monitor and slide its VESA plate onto the corresponding arm's mounting head. Ensure the monitor is securely locked in place.
4.4. Cable Management
Image: Integrated cable management on the monitor arm.
Route all monitor cables (power, video, etc.) through the integrated cable management channels on the arms. This helps maintain a tidy workspace and prevents cable damage.
5. Operation and Adjustment
Image: Side view of the monitor arm extended.
5.1. Gas Spring Tension Adjustment
The gas spring mechanism allows for smooth vertical adjustment. If the monitor sags or floats, adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height.
5.2. Tilt, Swivel, and Rotation
Image: Monitor arms fully extended, illustrating flexibility.
- Tilt: The monitor can be tilted from -45° to +90° to reduce glare and optimize viewing angles.
- Swivel: The arms allow for a swivel range of -90° to +90° at the wall plate and monitor connection points, enabling side-to-side movement.
- Rotation: The VESA plate allows for 360° rotation, enabling easy switching between landscape and portrait orientations.
- Extension: The arms can extend from the wall between 90 mm and 540 mm, providing ample depth adjustment.
6. Maintenance
- Periodically check all screws and connections to ensure they remain tight.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the gas spring mechanism.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor sags or drops | Gas spring tension is too low for monitor weight. | Increase gas spring tension by turning the adjustment screw clockwise. |
| Monitor floats up | Gas spring tension is too high for monitor weight. | Decrease gas spring tension by turning the adjustment screw counter-clockwise. |
| Monitor is not level | VESA plate or arm connection is not perfectly aligned. | Adjust the leveling screw on the VESA plate or re-align the monitor on the arm. |
| Mount feels unstable | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws. Ensure the wall can support the load. Consult a professional if needed. |
8. Specifications
- Model: BP0146
- Brand: LogiLink
- Color: Black
- Material: Aluminum
- Mounting Type: Wall Mount
- Number of Screens: 2
- Compatible Screen Size: 17 - 32 inches (flat and curved)
- Maximum Load Capacity per Arm: 9 kg (19.8 lbs)
- VESA Compatibility: 75x75 mm, 100x100 mm
- Wall Distance (Extension): 90 - 540 mm
- Tilt Angle: -45° to +90°
- Swivel Angle: -90° to +90°
- Screen Rotation: 360°
- Special Features: Gas Spring Mechanism, Integrated Cable Management
- Country of Origin: China
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local LogiLink distributor or retailer. Keep your proof of purchase for warranty claims.