1. Introduction
Welcome to your new Trio Leuchten Carlo 225272007 LED Wall Light. This manual provides essential information for the safe installation, operation, and maintenance of your product. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety guidelines:
- Always disconnect the main power supply before attempting any installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the fixture.
- This product is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for indoor use only.
- Do not look directly into the LED light source when it is illuminated.
3. Package Contents
Please check that all components are present and undamaged:
- 1x Trio Leuchten Carlo 225272007 LED Wall Light
- Mounting hardware (screws, wall plugs)
- Instruction Manual
4. Setup and Installation
Follow these steps for proper installation of your wall light:
- Preparation: Ensure the main power supply to the installation area is switched off at the circuit breaker.
- Marking: Hold the fixture against the desired mounting location on the wall and mark the drilling points for the mounting bracket.
- Drilling: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
- Wiring: Connect the electrical wires from the wall to the terminal block on the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth (⚡). Secure all connections firmly.
- Mounting: Attach the fixture's mounting bracket to the wall using the provided screws. Then, secure the light fixture to the mounting bracket.
- Final Check: Double-check all connections and ensure the fixture is firmly mounted to the wall. Restore power to the circuit.
5. Operating Instructions
Your Trio Leuchten Carlo 225272007 LED Wall Light offers adjustable brightness and color temperature to suit your preferences.
5.1. Brightness Adjustment (SWITCH Dimmer)
The integrated SWITCH dimmer allows you to adjust the brightness of the light using a standard wall switch. No external dimmer is required.
- 100% Brightness: Turn the light ON using your wall switch.
- 50% Brightness: Turn the light OFF and then ON again within 3 seconds.
- 25% Brightness: Turn the light OFF and then ON again twice within 3 seconds each time.
For more information on the SWITCH dimmer technology, please visit: trio-lighting.com/switchdimmer
5.2. Color Temperature Adjustment (Colour SWITCH)
The Colour SWITCH function allows you to select between three distinct color temperatures: Warm White (3000K), Neutral White (4000K), and Cool White (6000K). This feature is controlled by a switch located on the underside of the lamp.
- To change the color temperature, locate the small switch on the underside of the fixture.
- Cycle through the switch positions to select your desired color temperature: Warm White (3000K), Neutral White (4000K), or Cool White (6000K).
6. Maintenance
Proper care will ensure the longevity and appearance of your wall light:
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- LEDs: The LED light sources in this fixture are integrated and not user-replaceable. Do not attempt to replace them.
- Inspection: Periodically check for any loose connections or signs of damage. If any damage is found, disconnect power and consult a qualified electrician.
7. Troubleshooting
If you encounter any issues with your wall light, please refer to the following table:
| Problem | Possible Solution |
|---|---|
| Light does not turn on. |
|
| Light flickers or dims unexpectedly. |
|
| Brightness or color temperature adjustment is not working. |
|
8. Specifications
- Brand: Trio
- Model: 225272007
- Power: 18W LED
- Luminous Flux: 1800 lumens
- Color Temperature: 3000K (Warm White), 4000K (Neutral White), 6000K (Cool White)
- Material: Metal (Nickel Matt finish)
- Dimensions (L x W x H): 50 cm x 8 cm x 4.8 cm
- Weight: 1.15 kg
- IP Rating: IP20 (Indoor use only)
- Average Lifespan: 25,000 hours
- Energy Efficiency Class: A+
- Input Voltage: AC (as per local standards)
9. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's terms and conditions for specific warranty details and duration.
For technical support, warranty claims, or any questions regarding your Trio Leuchten product, please contact your retailer or visit the official Trio Leuchten website for customer service information.
