Introduction
The BEABA by Shnuggle Air Complete Sleep System is a versatile 2-in-1 solution designed to provide a safe and comfortable sleeping environment for your child from infancy up to approximately 2 years of age. This system seamlessly converts from a bedside sleeper infant crib to a full-size crib, adapting to your child's growth and development.
Key features include dual-view mesh sides for breathability and visibility, a hypoallergenic fiber mattress, and removable, washable fabrics. The system also includes essential bedding for both the infant and full-size crib configurations.
Figure 1: Overview of the BEABA by Shnuggle Air Complete Sleep System components.
Safety Information
Please read and understand all instructions before assembly and use of the BEABA by Shnuggle Air Complete Sleep System. Keep this manual for future reference.
- Suffocation Hazard: Infants can suffocate in gaps between extra padding and the side of the bassinet/crib, or on soft bedding. Use only the mattress provided by the manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
- Fall Hazard: To prevent falls, do not use this product when the infant begins to push up on hands and knees, or has reached 35 inches (89 cm) in height, or 2 years of age, whichever comes first.
- Ensure all assembly fasteners are tightened securely. Periodically check for loose fasteners, damaged parts, or sharp edges.
- Do not use the product if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
- Keep small parts away from children during assembly.
- Always place your baby on their back to sleep.
Setup and Assembly
1. Bedside Sleeper Infant Crib Assembly
Follow the manufacturer's instructions provided with the product for initial assembly of the bedside sleeper infant crib. Ensure all components are securely connected.
- Unpack all components and verify against the parts list.
- Assemble the frame according to the diagrams.
- Attach the fabric sides, ensuring the mesh panels are correctly aligned.
- Insert the hypoallergenic fiber mattress.
Figure 2: The crib in its bedside sleeper (top) and full-size (bottom) configurations.
2. Converting to Full Size Crib
The system is designed to convert from an infant bedside sleeper to a full-size crib as your child grows. This conversion typically involves adding extension pieces and a larger mattress base (sold separately or included in the complete system package).
- Carefully disassemble the infant crib components as instructed in the conversion guide.
- Attach the full-size extension pieces to the main frame.
- Secure the larger fabric panels and mesh sides.
- Place the full-size hypoallergenic fiber mattress into the crib.
Figure 3: Comparison of the infant bedside sleeper and full-size crib configurations.
3. Height Adjustment (Bedside Sleeper Mode)
The bedside sleeper features 7 height adjustments to align with most bed heights, ranging from 16.9 inches to 25.2 inches (43 cm to 64 cm). Refer to your product's specific instructions for the mechanism to adjust the height.
- Locate the height adjustment buttons or levers on the crib legs.
- Simultaneously press and adjust the height to match your bed.
- Ensure both sides are adjusted to the same height and locked into position before placing your baby in the crib.
Operating Instructions
1. Using the Zip-Down Side (Bedside Sleeper Mode)
The bedside sleeper mode includes a zip-down side for easy access to your baby during the night. This feature allows for close proximity while maintaining a separate, safe sleeping space.
- Unzip the side panel carefully.
- Ensure the panel is fully lowered and secured if designed to be tucked under the mattress.
- Always zip the side panel back up and secure it when not actively attending to your baby, especially when leaving the bedside.
Figure 4: Demonstrating the zip-down side feature for easy access.
2. General Crib Use
Whether in bedside sleeper or full-size crib mode, always ensure your baby is placed on their back to sleep. The dual-view mesh sides allow for maximum airflow and visibility, enabling you to monitor your child easily.
Figure 5: A child utilizing the full-size crib configuration.
Maintenance and Care
1. Cleaning the Crib Frame and Fabric
The BEABA by Shnuggle Air Complete Sleep System features removable and washable hypoallergenic fabrics for easy cleaning.
- Frame: Wipe the crib frame with a damp cloth. Use mild soap if necessary, then wipe clean with water and dry thoroughly.
- Fabrics: Remove all fabric components from the frame. Follow the care label instructions for washing. Typically, machine wash cold on a gentle cycle with mild detergent. Do not bleach. Air dry or tumble dry on low heat. Ensure fabrics are completely dry before reattaching to the crib.
2. Mattress Care
The hypoallergenic fiber mattress is designed for breathability. Keep the mattress clean and dry.
- Spot clean the mattress with a damp cloth and mild soap.
- Allow the mattress to air dry completely before placing it back in the crib or covering it with a sheet.
- Do not machine wash or submerge the mattress in water.
Figure 6: The hypoallergenic fiber mattress within the crib.
3. Bedding Care
The included bedding sets (fitted sheets and reversible blanket) are made from 100% soft cotton.
- Machine wash cold with like colors.
- Tumble dry low or air dry.
- Do not bleach.
Figure 7: Bedding set placed inside the crib.
Figure 8: Detailed view of the cloud and stripe patterns on the bedding.
Troubleshooting
This section addresses common issues you might encounter with the BEABA by Shnuggle Air Complete Sleep System.
| Problem | Possible Cause | Solution |
|---|---|---|
| Crib feels unstable or wobbly. | Fasteners are loose or not fully engaged. | Check all screws, bolts, and locking mechanisms. Tighten securely. Ensure the crib is on a flat, level surface. |
| Zip-down side is difficult to operate. | Zipper may be misaligned or fabric caught. | Ensure fabric is not caught in the zipper. Apply a small amount of zipper lubricant if needed (ensure it's child-safe). |
| Difficulty adjusting height. | Adjustment buttons/levers not fully pressed or mechanism is stiff. | Ensure both adjustment points are pressed simultaneously. Clean any debris from the adjustment mechanism. |
| Bedding does not fit mattress. | Incorrect size bedding or mattress. | Verify you are using the correct bedding for the specific mattress size (infant or full-size). Refer to specifications for dimensions. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | BEABA by Shnuggle Air Complete Sleep System |
| Model Number | B0938NJWJD |
| Product Type | 2-in-1 Bedside Sleeper Infant Crib to Full Size Crib |
| Recommended Age/Weight | Infant Crib: Up to 6 months or when baby pushes up on hands/knees. Full Size Crib: Up to 2 years or 35 inches (89 cm). |
| Material Type | Fabric (Hypoallergenic), Frame (Material not specified, typically metal/wood) |
| Mattress Type | Hypoallergenic fiber mattress (50% more breathable than standard foam) |
| Bedside Sleeper Height Adjustment | 7 positions, 16.9" - 25.2" (43 cm - 64 cm) |
| Infant Crib Fitted Sheet Size | 83 x 50 cm (33 x 20 in) |
| Reversible Blanket Size | 90 x 70 cm (35 x 28 in) |
| Bedding Material | 100% Soft Cotton, OEKO-TEX 100 standard tested |
| Care Instructions | Wipe frame with damp cloth; Removable fabrics are washable. |
Warranty and Support
For warranty information, replacement parts, or further assistance, please contact BEABA customer support. Keep your proof of purchase for any warranty claims.
Manufacturer: Beaba
Website: Visit the Béaba Store on Amazon
Please refer to the official Beaba website or product packaging for the most current contact information and detailed warranty terms.
