1. Important Safety Instructions
Read and understand all safety warnings and instructions before operating this power inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Battery Compatibility: Use only with Greenworks 80V Lithium-Ion batteries.
- Ventilation: Ensure adequate ventilation around the inverter during operation to prevent overheating.
- Moisture: Do not expose the inverter to rain or wet conditions.
- Overload Protection: Do not exceed the 300W continuous power output. Overloading can damage the inverter and connected devices.
- Children: Keep the inverter and its accessories out of reach of children.
- Storage: Store the inverter in a dry, secure location when not in use.
2. Product Overview
The Greenworks Pro 80V 300W Power Inverter (Model IV80A00) converts 80V DC battery power to 120V AC household power and provides USB charging ports. It is designed for portable use with small electronics.
Package Contents:
- Greenworks Pro 80V 300W Power Inverter (Tool Only)
Note: Greenworks 80V battery is sold separately.
Key Features:
- 300W Continuous Power Output
- 120V AC Outlet (1x)
- 5V 2.4A USB Ports (2x)
- Compact and Lightweight Design
- Overload, Short-Circuit, and Temperature Protection
Figure 2.1: Greenworks Pro 80V 300W Power Inverter with key components labeled, including the 120V power outlet, two 5V 2.4A USB ports, and the battery compartment.
3. Setup
Inserting the Battery:
- Ensure the power inverter is turned off.
- Align the Greenworks 80V battery with the battery port on the inverter.
- Slide the battery into the port until it clicks securely into place.
Removing the Battery:
- Ensure the power inverter is turned off and all devices are disconnected.
- Press and hold the battery release latch.
- Slide the battery out of the inverter.
Figure 3.1: The Greenworks Pro 80V 300W Power Inverter shown alongside several Greenworks 80V batteries, demonstrating its compatibility and the need for a separate battery.
4. Operating Instructions
Turning On/Off:
- To turn on the inverter, press the power button. The LED indicator will illuminate.
- To turn off the inverter, press the power button again. The LED indicator will turn off.
Figure 4.1: The Greenworks Pro 80V 300W Power Inverter with its power button clearly visible, indicating the control for activation and deactivation.
Connecting Devices:
- Ensure the inverter is powered on.
- For AC devices, plug the device's power cord into the 120V AC outlet.
- For USB devices, plug the USB charging cable into one of the 5V 2.4A USB ports.
- Verify that the total power consumption of all connected devices does not exceed 300 watts.
Figure 4.2: The Greenworks Pro 80V 300W Power Inverter actively charging a smartphone via USB and powering a laptop via its AC outlet, demonstrating simultaneous device charging.
Figure 4.3: A detailed view of the inverter's output panel, showing the single 120V AC outlet and the two 5V 2.4A USB charging ports.
Typical Charging Capabilities (with Greenworks 80V 2.0Ah Battery):
- Charge an iPhone 14 Pro: Up to 10 times
- Charge an iPad Air: Up to 5 times
- Charge a MacBook Pro: Up to 2 times
Figure 4.4: An illustration of the inverter's charging capacity for common electronic devices like smartphones, tablets, and laptops, based on a Greenworks 80V 2.0Ah battery.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your power inverter.
- Cleaning: Use a soft, dry cloth to clean the exterior of the inverter. Do not use abrasive cleaners or solvents.
- Ventilation Openings: Keep the ventilation openings clear of dust and debris to ensure proper heat dissipation.
- Storage: When not in use for extended periods, remove the battery and store the inverter in a cool, dry place away from direct sunlight and moisture.
Figure 5.1: The inverter's design incorporates superior heat dissipation features, crucial for maintaining performance and preventing overheating during operation.
6. Troubleshooting
If you encounter issues with your power inverter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter does not turn on. | Battery not inserted correctly or discharged. | Ensure battery is fully seated and charged. |
| No power output from AC/USB ports. | Inverter is off, device is faulty, or overload protection activated. | Turn on inverter. Check device. Reduce load if exceeding 300W. |
| Inverter shuts down unexpectedly. | Overload, overheating, or low battery voltage. | Reduce load. Allow inverter to cool. Recharge or replace battery. |
| LED indicator flashes. | Indicates a fault condition (e.g., overload, low battery, overheating). | Refer to the specific LED flash pattern in the full manual for detailed error codes. Address the underlying issue. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | IV80A00 |
| Input Voltage | 80V DC (from Greenworks 80V battery) |
| Output Voltage | 120V AC |
| Continuous Power Output | 300 Watts |
| USB Output | 2x 5V 2.4A ports |
| Product Dimensions | 7.58 x 6.34 x 6.11 inches (19.25 x 16.1 x 15.52 cm) |
| Item Weight | 1.61 pounds (0.73 kg) |
8. Warranty and Support
The Greenworks Pro 80V 300W Power Inverter is backed by a Greenworks Pro 4-year tool warranty and a 4-year battery warranty (for Greenworks 80V batteries, sold separately).
For technical support, warranty claims, or further assistance, please visit the official Greenworks website or contact their customer service department. Keep your proof of purchase for warranty validation.
Official Greenworks Website: www.greenworkstools.com
9. Product Videos
Video 9.1: A brief overview of the Greenworks Pro 80V Power Inverter's features and portability.
Video 9.2: Demonstrating the ease of connecting and powering small electronics with the inverter.
Video 9.3: A detailed look at the inverter's design, including its compact size and carrying handle.