1. Introduction
This manual provides instructions for the UGREEN 3.5mm Headphone Extension Cable, Model 60311. This cable is designed to extend the reach of your 3.5mm audio connections, allowing for greater flexibility in connecting headphones, speakers, and other audio devices. It supports Hi-Fi stereo audio transmission and features a durable, braided design with gold-plated connectors for reliable performance.

Image 1.1: UGREEN 3.5mm Headphone Extension Cable, displaying its male and female connectors.
2. Setup
Setting up your UGREEN 3.5mm Headphone Extension Cable is a straightforward process:
- Identify the audio source device (e.g., TV, PC, smartphone) and the audio output device (e.g., headphones, speaker).
- Connect the male 3.5mm jack of the extension cable into the 3.5mm audio output port of your source device.
- Connect the female 3.5mm port of the extension cable to the 3.5mm male jack of your headphones or speaker.
- Ensure both connections are secure to prevent audio interruptions.

Image 2.1: The extension cable is compatible with a wide range of devices, including televisions, laptops, car stereos, amplifiers, and various portable audio players.
3. Operating Instructions
Once connected, the UGREEN 3.5mm Headphone Extension Cable operates as a passive audio extender. No additional setup or software is required.
- Audio Playback: Begin playing audio from your source device. Sound will be transmitted through the extension cable to your connected headphones or speakers.
- Volume Control: Adjust volume directly on your source device or connected audio output device.
- Important Note: This extension cable is designed for audio transmission only. It does not support microphone input or inline control functions (such as play/pause, track skip, or volume control buttons) found on some headphone cables.

Image 3.1: Demonstrating the practical benefit of the audio extender, allowing users to comfortably extend their headphone reach.
4. Maintenance
To ensure the longevity and optimal performance of your UGREEN 3.5mm Headphone Extension Cable, follow these maintenance guidelines:
- Storage: Store the cable in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles, which can damage the internal wires.
- Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Do not use harsh chemicals or abrasive cleaners.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself.

Image 4.1: The cable features a durable braided outer material and a gold-plated connector, designed for flexibility and longevity.
5. Troubleshooting
If you encounter issues with your UGREEN 3.5mm Headphone Extension Cable, refer to the following common troubleshooting steps:
- No Audio Output:
- Ensure both the male and female connectors are fully inserted into their respective ports.
- Verify that the audio source device is playing audio and its volume is turned up.
- Test your headphones/speakers directly with the source device (without the extension cable) to confirm they are functioning correctly.
- Try using a different 3.5mm cable or extension cable if available, to rule out a cable fault.
- Poor Audio Quality (Static, Distortion, Low Volume):
- Check all connections for looseness. A partial connection can cause poor audio.
- Ensure the 3.5mm ports on your devices are clean and free of debris.
- Test with another audio source or output device to isolate the problem.
- Microphone or Remote Control Not Working:
- This cable is designed for audio extension only and does not support microphone or inline remote control functions. If these features are required, a different type of cable may be necessary.
6. Specifications

Image 6.1: The cable is engineered for Hi-Fi audio performance, ensuring clear sound transmission.
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Number | 60311 |
| Connector Type | Auxiliary (3.5mm) |
| Cable Type | Auxiliary Audio Cable |
| Connector Gender | Male-to-Female |
| Compatible Devices | DVD Player, Laptop, PC, Speaker, Tablet, Television, Phone, MacBook, iPad, PS4, Headset, Amplifier, Soundbar |
| Special Feature | Braided, Tangle Free |
| Recommended Uses | Extending audio jack reach for various devices |
| Data Transfer Rate | 48 Gigabits Per Second (Audio Signal) |
| Shape | Round |
| Number of Pins | 3 |
| Unit Count | 1 Count |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Outer Material | Cotton |
| Item Weight | 2.46 ounces |
| Package Dimensions | 9.09 x 6.46 x 0.79 inches |
| Manufacturer | Ugreen Group Limited |
| Date First Available | March 31, 2022 |
7. Warranty and Support
For warranty information or technical support regarding your UGREEN 3.5mm Headphone Extension Cable, please refer to the official UGREEN website or contact UGREEN customer service directly. Details can typically be found on the product packaging or through the official brand channels.
You can visit the UGREEN Store on Amazon for more product information and support resources.