Project Source 2-Pack 13-inch Brushed Nickel Flush Mount LED Light

Introduction

Thank you for choosing the Project Source 2-Pack 13-inch Brushed Nickel Flush Mount LED Light. This product is designed for indoor use, providing efficient and reliable illumination. Featuring an Energy Star rating, these LED lights offer maximum energy savings without compromising performance. Each light has a Color Rendering Index (CRI) of 90, a color temperature of 3000 Kelvin (warm white), and delivers 1300 lumens of brightness. This manual provides essential information for safe installation, operation, and maintenance.

Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
• This product is intended for indoor use only. Do not expose to water or moisture.
• Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC).
• If you are unsure about the installation process, consult a qualified electrician.
• Do not attempt to modify or disassemble the fixture. The LED light source is non-removable.
• Keep packaging materials away from children.

What's in the Box

Verify that all components are present before beginning installation:

• 2 x 13-inch Flush Mount LED Light Fixtures
• 1 x Remote Control
• Installation Hardware (e.g., mounting screws, wire nuts)

Image: Two Project Source 13-inch brushed nickel flush mount LED lights, as included in the 2-pack.

Setup and Installation

Tools Required (Not Included)

• Phillips Head Screwdriver
• Wire Strippers
• Electrical Tape
• Safety Glasses

Pre-Installation

1. Turn off power: Locate the circuit breaker or fuse box that controls the power to the light fixture you are replacing or installing. Turn off the power completely.
2. Prepare the mounting surface: Ensure the electrical box is securely mounted and capable of supporting the weight of the fixture.

Installation Steps

1. Remove old fixture (if applicable): Carefully disconnect the wiring from the old fixture and remove it from the ceiling.
2. Attach mounting bracket: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firm and stable.
3. Make electrical connections:
   • Connect the green or bare copper (ground) wire from the fixture to the ground wire from the electrical box.
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box.
   • Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box.
   Use wire nuts to secure all connections and wrap them with electrical tape for added safety.
4. Mount the fixture: Carefully push the connected wires into the electrical box. Align the fixture with the mounting bracket and secure it in place using the provided screws.
5. Restore power: Once the fixture is securely mounted, turn the power back on at the circuit breaker or fuse box.

Operating Instructions

This flush mount light is controlled via the included remote control.

• Power On/Off: Press the ON/OFF button on the remote control to turn the light on or off.
• Light Settings: The light provides a consistent warm white (3000K) illumination at 1300 lumens. There are no adjustable brightness or color temperature settings on this model.
• Remote Control Battery: The remote control requires batteries (not included). Refer to the remote control's battery compartment for the correct battery type and installation instructions.

Maintenance

Proper care will ensure the longevity and appearance of your light fixture.

• Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
• Bulb Replacement: This fixture uses integrated LED technology. The LED light source is non-removable and designed to last for the lifetime of the product. No bulb replacement is necessary.
• General Care: Periodically check all connections and mounting hardware to ensure they remain secure.

Troubleshooting

If you experience issues not listed here, or if the problem persists after attempting the solutions, please contact customer support.

Specifications

Warranty and Support

Project Source products are manufactured to high-quality standards. For information regarding warranty coverage or technical support, please refer to the product packaging or contact Project Source customer service directly. Keep your purchase receipt for warranty claims.

For further assistance, please visit the Project Source official website or contact their customer support line.