1. Introduction
The Valonii Automatic Cat Laser Toy is designed to provide engaging and stimulating play for your cats, kittens, and even dogs. Featuring a real random trajectory laser, motion activation, and multiple speed modes, this toy encourages natural hunting instincts and keeps pets entertained for extended periods. Its silent operation ensures minimal disruption to your home environment.
2. Safety Information
This toy has passed Class 1 laser IEC and FDA certifications, ensuring it is a safe pet toy when used as directed. Always ensure the toy is placed on a stable surface to prevent tipping. Do not look directly into the laser beam. Supervise pets during play, especially during initial use.
3. Product Features
- Real Random Trajectory: Dual motor control for horizontal rotation and vertical swinging of the laser head, stimulating natural hunting instincts.
- Wide Range Motion Activation: Built-in advanced object motion sensor activates the toy when it detects movement, automatically shutting off after 15 minutes. The sensor can be activated once every 2 hours.
- 3 Speed Modes: Offers fast, slow, and mixed modes to suit different activity levels, indicated by yellow, red, and purple lights respectively.
- Built-in Rechargeable Battery: Equipped with a 1000mAh battery, fully charged in 2.5 hours, providing approximately 2 days of use.
- Adjustable Angle: Laser head angle can be manually adjusted within a vertical range of 50° and automatically swings within a horizontal range of 60°.
- Silent and Durable: Features a gearless dual motor control and precision gear design for quiet operation and long-lasting durability.
4. Setup
4.1 Charging the Device
Before first use, fully charge the laser toy. Connect the provided USB cable to the toy and a 5V/1A charger (not included). A full charge takes approximately 2.5 hours. The toy can be used while plugged in.
Image: Charging the Valonii Automatic Cat Laser Toy.
4.2 Placement
For optimal performance and user experience, it is recommended to place the toy on a table or elevated surface at a height of 8-35 inches (20-89 cm). Ensure the area where the laser will project is clear of obstacles.
Image: Recommended placement height for the laser toy.
5. Operating Instructions
5.1 Power On/Off and Mode Selection
Locate the power/mode button on the device. Press the button to cycle through the different speed modes:
- Slow Mode: Indicated by a yellow light. Ideal for calmer or older cats.
- Fast Mode: Indicated by a red light. Suitable for hyperactive cats.
- Mixed Mode: Indicated by a purple light. Combines slow and fast movements for active cats.
Image: Speed mode indicators.
5.2 Motion Activation
The toy features a motion sensor that intelligently activates when it detects a moving pet within a range of 0-160 inches (0-406 cm). Once activated, it will operate for 15 minutes and then automatically shut off. The sensor will only reactivate after a 2-hour cool-down period.
Image: Motion sensor range and activation cycle.
5.3 Adjusting Laser Angle
The laser head can be manually rotated vertically by 50 degrees to direct the laser dots onto the ground or walls. The toy automatically swings the laser within a 60-degree horizontal range.
Image: Adjustable laser head angle.
6. Maintenance
6.1 Cleaning
To clean the toy, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
6.2 Battery Care
To prolong battery life, avoid completely draining the battery frequently. Recharge the toy when the battery indicator suggests low power. Always use a 5V/1A charger for optimal battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Laser not working or dim | Low battery; internal wiring issue (rare) | Ensure the toy is fully charged. If the issue persists after charging, contact customer support. |
| Toy not activating via motion sensor | Pet not within sensing range; 2-hour cool-down period active | Ensure pet is within 160 inches of the toy. Wait for the 2-hour cool-down period to expire. |
| Short battery life | Frequent use; improper charging; aging battery | Ensure you are using a 5V/1A charger. Fully charge the device before each use. Battery performance may degrade over time. |
| Laser movement is erratic or stuck | Obstruction; internal mechanism issue | Ensure no debris is obstructing the laser head. If the problem continues, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | M05 |
| Dimensions (LxWxH) | 3.43 x 3.43 x 6.3 inches |
| Item Weight | 10.9 ounces (0.68 Pounds) |
| Battery | 1000mAh Rechargeable (1 CR2 battery included) |
| Charging Time | 2.5 hours |
| Working Time | Approx. 2 days (depending on usage) |
| Motion Sensor Range | 0-160 inches |
| Laser Class | Class 1 (IEC and FDA certified) |
| Material | Plastic |
| Included Components | Cat toy, USB Cable, User Guide |
9. Warranty and Support
The Valonii Automatic Cat Laser Toy comes with a 1-Year Warranty. For any questions, concerns, or usage suggestions, please email us. We are committed to providing top quality products and efficient service.
Thank you for choosing Valonii!
