Fredorch F19 Telescopic Sex Machine User Manual

1. Introduction

This manual provides instructions for the safe and effective operation, maintenance, and troubleshooting of your Fredorch F19 Telescopic Sex Machine. Please read this manual thoroughly before using the device to ensure proper function and to prevent injury.

The Fredorch F19 is a remote-controlled telescopic machine designed for personal use. It features an adjustable angle and a robust motor for varied experiences.

2. Safety Information

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always ensure the power adapter is connected to a suitable electrical outlet (100-240V, 50-60Hz).
• Keep the device away from water or other liquids. Do not operate in wet conditions.
• Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
• Keep out of reach of children and pets.
• Disconnect power before cleaning or maintenance.
• Use only attachments provided or approved by Fredorch.
• Ensure the device is stable on a flat surface before operation.

3. Package Contents

Verify that all items are present in the package:

• 1 x Main Machine Body
• 2 x Solid T-Bar (Frame Support)
• 1 x Rod with Quick Connector
• 1 x Power Supply Set (Plug suitable for your region)
• 1 x Wireless Remote Controller (Batteries not included)
• 1 x Instruction Manual
• Attachments (Color may vary)

4. Setup and Assembly

1. Assemble the Frame: Attach the two solid T-bars (frame supports) to the main machine body. Ensure they are securely fastened to provide a stable base.
2. Attach the Rod: Insert the rod with the quick connector into the designated slot on the main machine body.
3. Connect Attachments: Use the quick connector to attach your desired dildo attachment to the rod. Ensure it is firmly seated.

   

4. Power Connection: Connect the power supply set to the machine and then plug it into a suitable electrical outlet.

   

5. Insert Remote Batteries: Open the battery compartment of the wireless remote controller and insert the required batteries (not included).

   

5. Operating Instructions

5.1 Power On/Off

Once connected to power, the machine is in standby mode. Use the remote control to power on or off the device.

5.2 Adjusting Angle

The machine's angle can be adjusted from -45 degrees to +90 degrees. Loosen the angle adjustment knob, set the desired angle, and then securely tighten the knob. The machine also allows for 360-degree horizontal rotation.

5.3 Controlling Telescopic Motion

Use the wireless remote controller to manage the telescopic motion. The remote typically has buttons for increasing/decreasing speed or changing patterns. Refer to the remote's specific markings for exact functions. The stroke length is adjustable from 3 to 9 cm.

The machine operates with a low noise level, typically between 30-38 dB.

6. Maintenance and Cleaning

• Cleaning: Disconnect the power supply before cleaning. Clean the machine body with a soft, damp cloth. For attachments, use warm water and a mild soap or a specialized toy cleaner. Ensure all parts are completely dry before reassembly or storage.
• Storage: Store the machine in a clean, dry place away from direct sunlight and extreme temperatures.
• Lubrication: Periodically check moving parts for smooth operation. If necessary, apply a small amount of silicone-based lubricant to the telescopic rod.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Specific warranty information is not provided in the product description. For warranty details or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided with your product packaging or visit the official Fredorch website.