Introduction
The ColorKey TrussPar Quad 3 GO is a battery-powered LED lighting fixture designed for professional stage and event lighting. Its compact, triangular design allows for versatile placement, including fitting inside truss legs for uplighting effects. This manual provides detailed instructions for setup, operation, and maintenance of your TrussPar Quad 3 GO.
Image: Front view of the ColorKey TrussPar Quad 3 GO, showcasing the digital display and control buttons.
What's in the Box
- TrussPar Quad 3 GO Light Fixture
- IR Remote Control
- Power Cables
Key Features
- Battery-powered LED tri-par truss warming fixture.
- Up to 15 hours of battery life on a single color, or 6 hours with all colors.
- Equipped with 3x10W 4-in-1 RGBW LEDs (Red, Green, Blue, White).
- Features a 16° beam angle for focused lighting.
- Supports 5 or 9 DMX channels for advanced control.
- Control options include DMX 512, Master/Slave, Auto, and Sound to Dimmer Mode.
- Includes an IR Remote for convenient operation.
- Integrated digital dimmer and strobe effects.
Product Components
Front Panel
Image: Front view of the fixture, showing the LED display and navigation buttons (MENU, UP, DN, ENTER) for accessing settings and modes.
- LED Display: Shows current mode, DMX address, and other settings.
- Control Buttons: MENU, UP, DN, ENTER for navigating and selecting options.
Rear Panel
Image: Rear view of the fixture, highlighting the Power In, Power Out, Power switch, Charge switch, and Battery switch.
- POWER IN: IEC power input for connecting to mains power.
- POWER OUT: IEC power output for daisy-chaining power to other fixtures.
- POWER Switch: Turns the unit on or off.
- CHARGE Switch: Activates or deactivates battery charging.
- BATTERY Switch: Engages or disengages battery power.
Side Panel
Image: Side view of the fixture, showing the 3-pin DMX In and DMX Out connectors for DMX control.
- DMX IN: 3-pin XLR input for DMX signal.
- DMX OUT: 3-pin XLR output for daisy-chaining DMX signal to other fixtures.
Truss Placement
Image: The triangular fixture positioned inside a metal truss, demonstrating its intended use for uplighting within stage structures.
Setup Instructions
- Unpacking: Carefully remove the fixture and all accessories from the packaging. Inspect for any damage.
- Power Connection:
- For continuous operation or charging, connect the supplied power cable to the POWER IN port and a suitable AC power outlet (AC100-240V; 50-60Hz).
- Ensure the POWER switch is in the "ON" position.
- To charge the battery, ensure the CHARGE switch is in the "ON" position. The fixture can be charged while in use.
- Battery Operation: To operate solely on battery power, ensure the BATTERY switch is in the "ON" position and the power cable is disconnected or the POWER switch is off.
- Mounting: The triangular design allows for placement inside truss legs. Use the 10mm thread for C-clamp mounting if desired. Ensure the fixture is securely mounted to prevent accidental falls.
- Initial Power On: Once connected to power or using battery, turn on the POWER switch. The LED display will illuminate.
Operating Modes
The TrussPar Quad 3 GO offers several operating modes, accessible via the on-board menu display or the included IR remote.
1. Manual Control (On-board Menu)
Use the MENU, UP, DN, and ENTER buttons to navigate through the display options. You can adjust settings such as DMX address, operating mode, color mixing, and strobe speed.
Image: The LED display of the fixture, showing menu options for configuration.
2. IR Remote Control
The included IR remote provides convenient wireless control for basic functions and color selection without DMX. Point the remote directly at the IR sensor on the fixture.
Image: An example of an IR remote control, similar to the one included, used to change colors and modes.
3. DMX 512 Control
For advanced control, connect the fixture to a DMX controller using 3-pin XLR cables. Set the DMX address and channel mode (5 or 9 channels) via the on-board menu. Refer to the DMX Channel Chart in the Specifications section for detailed channel assignments.
4. Master/Slave Mode
Link multiple TrussPar Quad 3 GO fixtures together. Set one unit as the "Master" and others as "Slave" units. The slave units will mirror the master's operation, allowing for synchronized lighting effects without a DMX controller.
5. Auto Mode
The fixture has several built-in automatic programs, including fade and chase effects. Select "Auto" mode from the menu and choose your desired program.
6. Sound to Dimmer Mode
In this unique mode, the fixture's digital dimmer responds to the beat of the music, creating dynamic lighting synchronized with audio. Select "Sound to Dimmer" from the menu to activate.
Maintenance
- Cleaning: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the fixture in a dry, dust-free environment.
- Battery Care: For optimal battery life, fully charge the unit before long-term storage and recharge every 3 months.
- Inspection: Periodically check power cables and DMX connections for wear or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not power on. | No power, POWER switch off, battery depleted. | Check power cable connection, ensure POWER switch is ON. If on battery, ensure BATTERY switch is ON and battery is charged. |
| No DMX control. | Incorrect DMX address, wrong channel mode, faulty DMX cable, DMX controller issue. | Verify DMX address and channel mode settings. Check DMX cable connections. Test with a different DMX cable or controller. |
| IR remote not working. | Remote battery depleted, obstructed IR sensor, remote out of range. | Replace remote battery. Ensure clear line of sight to the fixture's IR sensor. Operate within recommended range. |
| Short battery life. | Battery not fully charged, operating at full intensity with all colors. | Ensure battery is fully charged (up to 5 hours). Note that using all colors at full intensity will reduce battery life (approx. 6 hours). Single color use extends life (up to 15 hours). |
Specifications
| Feature | Detail |
|---|---|
| Model | CKU-2060 |
| Light Source | 3x10W 4-in-1 RGBW LEDs |
| Beam Angle | 16° |
| DMX Channels | 5 or 9 channels |
| Control Modes | DMX 512, Master/Slave, Auto, Sound to Dimmer Mode, IR Remote |
| Battery Life (Single Color) | Up to 15 hours |
| Battery Life (All Colors) | Up to 6 hours |
| Charging Time | Approximately 5 hours for full charge |
| Power Consumption | 110W |
| Power Supply | AC100-240V; 50-60Hz |
| Dimensions (L x W x H) | 4.3” x 4.3” x 5.3” (110 x 110 x 135 mm) |
| Weight | 1.8 Lb (0.8kg) |
| IP Rating | IP20 (Indoor use only) |
| Lamp Life | Up to 50,000 hours |
Warranty and Support
For warranty information, technical support, or service inquiries, please contact ColorKey customer service or visit the official ColorKey website. Keep your proof of purchase for warranty claims.
Manufacturer: ColorKey
Model Number: CKU-2060
UPC: 702706437462
