GoPro 3-Way 2.0 Mount Instruction Manual

1. Introduction

The GoPro 3-Way 2.0 is a versatile accessory designed to enhance your GoPro camera's capture capabilities. It functions as a camera grip, an extension arm, and a tripod, providing multiple mounting options for various shooting scenarios. This manual provides instructions for its proper setup, operation, and care.

Figure 1: The GoPro 3-Way 2.0 in its compact grip configuration.

2. Package Contents

Verify that all items are present in your package:

• GoPro 3-Way 2.0 Mount
• Swivel Base
• Wrist Strap

3. Features Overview

The 3-Way 2.0 offers several key features:

• 3-in-1 Design: Seamlessly transitions between a camera grip, a tripod, and an extension arm.
• Integrated Ball Joint: Allows for flexible camera angle adjustments without repositioning the mount.
• Built-in Tripod: Provides a stable platform for stationary shots.
• Ergonomic Grip: Designed for comfortable handling during extended use.
• Folding Extension Arm: Extends for selfies, overhead shots, or follow-cam footage.

4. Setup and Assembly

Follow these steps to prepare your 3-Way 2.0 for use:

1. Attach Camera: Secure your GoPro camera to the swivel base using the standard GoPro mounting finger and thumb screw. Ensure the screw is tightened firmly to prevent movement.
2. Attach Swivel Base: Connect the swivel base to the top of the 3-Way 2.0 mount. The swivel base allows for quick angle adjustments.
3. Attach Wrist Strap: For added security, attach the included wrist strap to the designated loop at the base of the grip.

5. Operating Modes

The 3-Way 2.0 offers three primary operating modes:

5.1 Camera Grip Mode

In its most compact form, the 3-Way 2.0 functions as an ergonomic camera grip. This mode is ideal for handheld shooting, providing a stable and comfortable hold for your camera.

5.2 Extension Arm Mode

To use as an extension arm:

1. Unfold the arm sections from the main grip.
2. Extend the arm to your desired length. The arm can be used for capturing selfies without the mount appearing in the frame, or for achieving extended reach in follow shots.

Figure 2: The 3-Way 2.0 in extension arm mode.

5.3 Tripod Mode

To deploy the tripod:

1. Locate the tripod legs integrated into the grip.
2. Fold out the legs until they lock into position, forming a stable three-legged base.
3. Place the tripod on a flat, stable surface for stationary recording, time-lapses, or group photos.

Figure 3: GoPro camera mounted on the 3-Way 2.0 in tripod mode.

5.4 Ball Joint Adjustment

The integrated ball joint allows for precise camera angle adjustments:

1. Loosen the thumb screw located near the ball joint.
2. Tilt or swivel your camera to the desired angle.
3. Tighten the thumb screw to secure the camera in position.

Figure 4: Detail of the ball joint for angle adjustment.

6. Maintenance

To ensure the longevity and optimal performance of your GoPro 3-Way 2.0 mount:

• Cleaning: Wipe the mount with a clean, damp cloth after use, especially if exposed to saltwater, sand, or dirt. Ensure all joints are free of debris.
• Drying: Allow the mount to air dry completely before storing.
• Storage: Store in a cool, dry place away from direct sunlight.
• Joint Lubrication: If joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts. Avoid petroleum-based lubricants.

7. Troubleshooting

If you encounter issues with your 3-Way 2.0 mount, consider the following:

• Stiff Joints: Refer to the Maintenance section for lubrication advice.
• Camera Instability: Ensure all thumb screws are securely tightened. Check that the camera is properly seated on the mounting fingers.
• Mount Damage: If the mount appears damaged, discontinue use to prevent potential camera loss or injury.

For further assistance, please visit the official GoPro support website.

8. Specifications

9. Warranty and Support

The GoPro 3-Way 2.0 mount is covered by GoPro's standard warranty. For detailed warranty information, product registration, and technical support, please visit the official GoPro website or contact GoPro customer service.

For online support resources, visit: GoPro Support