WILDGAME INNOVATIONS Evolution Feeder 6V Analog Power Control Unit

Product Overview

The Wildgame Innovations Evolution Feeder 6V Analog Power Control Unit is designed to upgrade or build a varmint-proof hunting feeder. This programmable control unit allows for precise management of feed times and duration, ensuring efficient attraction and patterning of deer and other game while preventing access by rodents.

Key features include a durable, 100% varmint-proof design with a spinner plate recessed underneath a heavy-duty mounting bracket. Its spring-loaded mechanism automatically reseals to the barrel after spinning, and the arm design utilizes centrifugal force for feed dispersal. The unit offers 24 available feed times with durations from 1 to 20 seconds, providing a 360-degree distribution range of up to 30 feet. Constructed from powder-coated, galvanized steel, it ensures long-term durability in various hunting environments.

Image: The Wildgame Innovations Evolution Feeder 6V Analog Power Control Unit, including the main housing, timer, and funnel.

Safety Information

Ensure the feeder is securely fastened to prevent tipping or access by larger animals. Use only appropriate feed types for local wildlife and follow all local regulations regarding wildlife feeding.

Included Parts

Please verify that all the following components are present in your package:

• Power Control Unit (1)
• Timer Unit (1)
• M5.8 x 3/4" Bolt (2)
• 10mm Flange Nut (2)
• 1/4" Washer
• 4.6mm x 16mm Self-Drilling Tapping Screw (4)
• 5.1mm x 20mm Self-Tapping Screw (4)
• 27mm Drop Funnel (with hardware, 1)

Image: Detailed diagram illustrating each component included with the feeder unit.

Setup Instructions

1. Battery Installation

The feeder unit operates on a 6V battery (not included). Open the battery compartment on the Power Control Unit. Connect the positive (+) and negative (-) terminals of the 6V battery to the corresponding connectors inside the unit. Ensure a secure connection.

2. Mounting the Unit

Attach the Power Control Unit to your feeder barrel using the provided mounting brackets and screws. The unit is designed for secure attachment to various feeder types. Ensure the unit is level and firmly secured to prevent movement during operation or adverse weather conditions.

3. Drop Funnel Installation

Install the 2-inch drop funnel to the bottom of your feeder barrel, aligning it with the opening of the Power Control Unit. Secure the funnel using the provided hardware. This ensures proper flow of feed into the unit for dispersal.

Operating Instructions

1. Setting Feed Times and Duration

The Analog Timer Unit allows for precise control over feeding schedules. Refer to the timer unit's display and buttons to set your desired feed times and duration. The unit supports up to 24 available feed times, with each feed lasting between 1 to 20 seconds.

• Use the 'SET' button to enter programming mode.
• Adjust 'Hr' (Hour) and 'Min' (Minute) using the '+' and '-' buttons to set the start time for each feed cycle.
• Set the 'Run Time' (duration) for each cycle, from 1 to 20 seconds.
• Repeat for all desired feed times throughout the 24-hour period.

Image: The Analog Timer Unit, showing its display and control buttons for setting feed schedules.

2. Test Function

To manually test the feeder's operation, press the 'TEST' button on the timer unit. This will activate the spinner plate for a short duration, allowing you to verify feed dispersal and range.

Maintenance

1. Cleaning

Regularly inspect and clean the spinner plate and the interior of the Power Control Unit to prevent build-up of feed, dust, or debris. A clean unit ensures optimal performance and prevents blockages.

2. Battery Care

Check the 6V battery periodically. Replace it when the power level is low to ensure continuous operation. For prolonged periods of non-use, it is recommended to remove the battery to prevent discharge or damage.

3. Varmint Guard Inspection

Periodically inspect the varmint-proof spinner plate and mounting bracket for any signs of wear or damage. Ensure the spring-loaded design is functioning correctly to reseal the barrel after feeding, preventing varmint access.

Troubleshooting

Feeder Not Dispensing Feed

• Check Battery: Ensure the 6V battery is fully charged and properly connected. A low battery can prevent the motor from operating.
• Inspect for Obstructions: Verify that the feed funnel and spinner plate are free from clogs or foreign objects.
• Timer Settings: Double-check that the feed times and duration are correctly programmed on the timer unit.
• Motor Connection: Ensure all wires connecting the timer to the motor are secure and free from damage.

Timer Display Issues

• Battery Level: A dim or flickering display often indicates a low battery. Replace or recharge the 6V battery.
• Reset Timer: If the display is unresponsive or showing incorrect information, try resetting the timer unit (refer to the timer's specific reset procedure, usually a small reset button).
• Environmental Factors: Extreme temperatures can sometimes affect LCD displays. Allow the unit to return to moderate temperatures.

Inconsistent Feed Distribution

• Feed Type: Ensure the feed used is suitable for the feeder and not clumping.
• Spinner Plate Condition: Check the spinner plate for damage or wear that might affect its rotation and dispersal pattern.
• Mounting Stability: Verify the feeder unit is securely mounted and not vibrating excessively, which could impact feed spread.

Specifications

Warranty and Support

Warranty Information

This Wildgame Innovations product comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Wildgame Innovations customer support. Visit the official Wildgame Innovations website for contact details, FAQs, and additional resources.

Note: Official product videos, if available, can typically be found on the manufacturer's website or authorized retail product pages.