Introduction
The NC Skin Hair Scalp Detector is a professional device designed for detailed analysis of skin, hair, and scalp conditions. Utilizing advanced optical principles, it captures enlarged images for comprehensive evaluation. This manual provides essential information for the proper setup, operation, and maintenance of your device.
Image: The NC Skin Hair Scalp Detector, featuring an 11-inch HD LCD screen that displays magnified images of skin and hair follicles. The device includes a handheld probe for examination.
Setup Instructions
- Unpack the Device: Carefully remove all components from the packaging. Verify that all parts are present: the main unit with the 11-inch HD LCD screen, the handheld probe, and the power adapter.
- Connect Power: Plug the power adapter into the device's power input port, then connect it to a standard electrical outlet.
- Attach Probe: Connect the handheld probe to the designated port on the main unit. Ensure a secure connection.
- Power On: Press the power button on the main unit to turn on the device. The HD LCD screen should illuminate.
- Initial Check: Once powered on, the screen will display a live feed from the probe. Ensure the image is clear and responsive.
Operating Instructions
Key Features Overview
Image: An overview of the device's main features, including its high-definition screen, pixel resolution, storage capacity, dual probes, multi-spectrum detection, and comparison function.
- 11-inch HD Screen: Provides a clear, high-definition display for detailed viewing.
- 10 Million Pixels: Ensures high image resolution and clarity.
- 16G Storage: Internal storage for saving images and videos, allowing for before-and-after comparisons.
- Double Detection Heads: Features two interchangeable probes for different magnification levels (200X and 50X).
- Four-Spectrum Detection: Offers White light, UV light, and Polarized light modes for varied analysis.
- Four-Picture Comparison: Allows simultaneous display of up to four images for comparative analysis.
Using the Probes
Image: Illustration of the two available probes (200X and 50X) and their respective applications for detailed scalp/hair follicle analysis and broader skin/mesoderm/UV layer detection.
The device comes with two interchangeable probes:
- 200X Magnification Head: Used for detailed examination of scalp and hair follicles. This probe provides an 800X resolution for microscopic analysis.
- 50X Three-Spectrum Head: Used for broader detection of skin and scalp issues, offering White, UV, and Polarized light modes.
To switch probes, gently twist and pull the currently attached probe to remove it. Align the new probe with the connector and push until it clicks securely into place.
Four-Spectrum Detection Modes
Image: Examples of the four-spectrum detection, demonstrating how different light modes reveal various scalp and skin conditions, such as hair follicles, UV layer issues, mesoderm conditions, and general skin health.
When using the 50X three-spectrum probe, you can switch between the following light modes:
- White Light (Skin Detection): Ideal for observing general skin and scalp conditions, including dryness, oiliness, clogged hair follicles, and signs of aging.
- UV Light (UV Layer): Detects early signs of scalp infection. Porphyrin-like substances, metabolized by epifolliculitis, appear red under UV light.
- Polarized Light (Mesoderm Detection): Used to detect scalp redness, pigmentation, and allergic inflammation within the mesoderm layer.
Use the mode selection buttons on the device to cycle through these detection modes.
Image and Video Recording
Image: The device displaying a video recording of hair follicles, highlighting its HD visual upgrade for dynamic observation.
The device supports both still image capture and video recording. Use the dedicated buttons on the main unit to initiate and stop recording. Captured media is stored on the internal 16G memory, allowing for later review and comparison.
Four-Picture Comparison Function
The 11-inch HD screen supports a four-picture comparison function. This allows you to display and compare up to four different images simultaneously, which is useful for tracking progress or comparing different areas of the scalp/skin.
Video: A demonstration of the NC Skin Hair Scalp Detector in use, showing how to operate the device and interpret the magnified views of scalp and hair follicles under different light settings.
Maintenance
- Cleaning the Probes: After each use, gently wipe the probe lens with a soft, lint-free cloth. For stubborn residue, use a small amount of lens cleaning solution applied to the cloth, not directly to the lens. Ensure the probe is dry before storage.
- Cleaning the Screen: Use a soft, dry microfiber cloth to clean the HD LCD screen. Avoid abrasive cleaners or excessive moisture.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use to prevent dust accumulation and damage.
- Power Off: Always power off the device and disconnect it from the power source when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Power cable not connected; Power outlet malfunction; Device fault | Check power cable connection; Try a different power outlet; Contact support if problem persists |
| No image on screen | Probe not connected properly; Probe lens obstructed; Device fault | Ensure probe is securely connected; Clean probe lens; Restart device; Contact support |
| Image is blurry or unclear | Probe lens dirty; Incorrect focus; Insufficient lighting | Clean probe lens; Adjust focus (if applicable); Ensure adequate ambient light or use device's built-in illumination |
| Cannot record images/videos | Storage full; Recording function not activated | Delete old files to free up space; Ensure recording button is pressed correctly |
Specifications
Image: A summary of the product's technical specifications, including screen size, resolution, probe types, and materials.
- Product Name: Four-spectrum hair follicle skin detector
- Hand-Held Probe: 200X magnification, 50X three spectrum
- Connection Mode: Plug-in
- Resolution: 10 million pixels
- Screen: 11-inch UHD LCD
- Material: ABS
- Function: Nursing and maintaining hair and scalp
- Color: White / Black
- Package Dimensions: 12.48 x 10.47 x 6.77 inches
- Weight: 3.86 Pounds
- UPC: 729565428677
- ASIN: B092QXWH64
Warranty and Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: NC