YCCTEAM Switch Pro Controller Instruction Manual

1. Introduction

Thank you for choosing the YCCTEAM Switch Pro Controller. This wireless controller is designed to enhance your gaming experience on Nintendo Switch, Switch Lite, and Switch OLED consoles. It features advanced functionalities such as NFC, Turbo, adjustable dual vibration, motion control, and a convenient wake-up function.

Image: Front view of the YCCTEAM Switch Pro Controller, showcasing its ergonomic design and button layout.

2. Key Features

• NFC Function: Supports Amiibo character doll induction, allowing you to unlock new characters, game modes, or bonuses by placing Amiibo figures or cards in the NFC detection area.

Image: The controller demonstrating NFC functionality with an Amiibo figure placed near the center.
• Wake Up Function: When the controller is in sleep mode, simply press the HOME button to wake up the console, allowing for quick resumption of gameplay.


Image: The controller positioned next to a Nintendo Switch console, illustrating the wake-up function with a wireless signal icon.

• Adjustable Dual Vibration Motors: Provides immersive and realistic gaming feedback with four adjustable vibration grades: 75%, 50%, 22%, and 0%.
• Motion Control: Built-in gyroscope axis detects detailed movements, offering an excellent sense of control for games that utilize motion sensing.

Image: A transparent view of the controller highlighting the dual vibration motors and motion control capabilities.
• Adjustable Turbo Function: Set a key to Turbo mode to fire as quickly as possible without repeatedly pressing the button. Turbo speed can be adjusted to 5, 12, or 20 times per second.


Image: The controller with an overlay indicating the Turbo function and its rapid firing capability.

• Screenshot Function: Easily capture and store in-game moments by pressing the dedicated screenshot button. Images can be uploaded or broadcast on social media.
• Ergonomic Design & Long Playing Time: Comfortable and lightweight for extended gaming sessions. The built-in 1000mAh polymer lithium battery provides approximately 8-10 hours of continuous use on a full charge. The controller can also be used while charging.


Image: The controller with a battery icon indicating its long playing time of 8-10 hours on a 1000mAh battery.

3. Setup and Connection

3.1 Initial Connection

Follow these steps to connect your YCCTEAM Switch Pro Controller to your Nintendo Switch console:

1. Turn on your Nintendo Switch console.
2. Go to System Settings > Airplane Mode > Controller Connection (Bluetooth), and ensure it is set to 'On'.
3. Go to Controllers setting > Click Change Grip/Order.
4. On the YCCTEAM controller, press and hold down the HOME button until the LED lights flash. Once paired, the player LED(s) corresponding to the controller number will remain lit.

3.2 Re-connecting the Controller

To quickly re-connect your controller to the console, simply press the HOME button and release it once the four LED lights flash. The system should turn on and connect within 3-10 seconds.

4. Operating Instructions

4.1 Using Turbo Function

To activate Turbo mode for a button:

1. Press the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR).
2. While holding the action button, press the Turbo button (T) simultaneously. The button will now rapidly repeat its input when held down.

To adjust Turbo speed, refer to the controller's specific instructions (usually involves holding Turbo and moving a joystick or pressing a D-pad direction).

4.2 Adjusting Vibration Intensity

The controller offers 4 levels of vibration intensity: 75%, 50%, 22%, and 0%. Consult the controller's specific manual or try combinations of buttons (e.g., Turbo + D-pad Up/Down) to cycle through intensity levels.

4.3 Screenshot Capture

Press the dedicated Screenshot button (usually located near the HOME button) to capture an image of your current game screen. The image will be saved to your Switch console's album.

5. Maintenance

5.1 Calibrating Joystick Drift

If you experience joystick drift, follow these steps to calibrate the control sticks:

1. Ensure the controller is fully charged (at least 30% battery).
2. On your Nintendo Switch console, go to System Settings > Controllers and Sensors > Calibrate Control Sticks.
3. Follow the on-screen instructions to calibrate the sticks. Note: Do not touch the Joystick when pairing to the Switch controller or during calibration.

6. Troubleshooting

6.1 Controller Not Pairing or Responding

If your controller won't pair, won't respond, or is displaying a flashing light, you may need to reset it. To do this, locate the small reset button (often a pinhole) on the controller. Use a small tool (like a paperclip) to push the reset button. This will prompt the controller to resync with the console.

6.2 NFC Function Not Working

If the NFC function is not working, ensure that:

• The Amiibo option is enabled in your game settings.
• You are placing the Amiibo figure or card correctly on the NFC detection area (usually between the - and + buttons).
• If using a wired connection, ensure "Pro Controller Wired Communication" is disabled in Switch Console settings, as this can disable the NFC touchpoint.

7. Specifications

8. Warranty and Support

All YCCTEAM products are covered by a repair period from the date of purchase. We also provide premium customer support, including lifetime online technical support. For any issues or inquiries, please contact our customer service team.

For more information or to contact support, please visit the YCCTEAM Brand Store on Amazon.