Product Overview
The Ymiko Dash Cam TVI Car Camera is designed to enhance driving safety with its high-resolution imaging and wide viewing angle. It features advanced night vision and robust waterproofing for reliable performance in various conditions.
- High Resolution: Provides a clear front view and wide viewing angle for accurate road condition identification and accident prevention.
- High-Definition Starlight Night Vision: Features a 180° wide angle and color high-definition chip for clear imaging, ensuring visibility during night driving or reversing.
- IP68 Waterproofness: The camera is rated IP68 waterproof, protecting it from adverse weather and ensuring long-term reliability.
- Simple Installation: Designed for easy connection of the camera cable to the AV cable and then to the vehicle's display.
- Wire Protection: The camera wire is equipped with a corrugated tube to prevent high-temperature burns when routed through the engine compartment, improving durability and safety.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Camera
- 1 x AV Cable
- 1 x Power Cord
- 2 x Screws
- 1 x User Manual
Setup and Installation
Follow these steps to properly install your Ymiko Dash Cam TVI Car Camera:
- Connect the Camera: Connect the camera cable to the AV cable.
- Connect to Vehicle: Connect the AV cable to your vehicle's compatible display unit.
- Power Connection: Connect the power cord to a 12V DC power source in your vehicle.
- Secure Wiring: Ensure the camera wire, equipped with its corrugated tube, is routed safely to prevent high-temperature damage, especially when passing through the engine compartment.
- Mounting: Securely mount the camera using the provided screws in a location that provides an unobstructed view.
Note:
This product only supports Android large screens that support TVI 30 input.
This image shows the Ymiko Dash Cam TVI Car Camera displaying a clear rear view with parking assist lines on an in-car Android screen, demonstrating its functionality when installed.
A detailed view of the Ymiko Dash Cam TVI Car Camera with its dimensions labeled, indicating a width of 40mm (1.6 inches), height of 26mm (1.02 inches), and depth of 28mm (1.1 inches).
This image compares the Ymiko Dash Cam TVI Car Camera's display quality and fisheye lens design against an ordinary camera, illustrating the enhanced viewing angle and clarity provided by the Ymiko product.
Three scenarios depicting common reversing dangers: a child in a blind spot, difficulty judging distance between vehicles, and a novice driver's challenge with parking near an obstacle. These highlight the need for a reliable reversing camera.
A series of four screenshots illustrating how to configure an Android head unit for the Ymiko Dash Cam. Steps include accessing factory settings (password 8888), selecting protocol parameter settings, choosing reverse video resolution settings, and adjusting specific parameters for TVI 30 input.
Operating Instructions
Once installed, the camera operates automatically when the vehicle is in reverse gear, displaying the rear view on your compatible Android screen.
Key Features:
- High-Resolution Display: Provides a clear and detailed view of the area behind your vehicle.
- 180° Wide Angle: Offers an expansive field of view to minimize blind spots.
- Starlight Night Vision: Ensures clear visibility even in low-light conditions.
- Parking Lines: Integrated parking assist lines help guide you safely into parking spaces.
This video showcases the Ymiko Dash Cam TVI Car Camera in action, highlighting its wide-angle perspective and effective night vision performance during vehicle operation.
Maintenance
To ensure optimal performance and longevity of your Ymiko Dash Cam TVI Car Camera, follow these maintenance guidelines:
- Regular Cleaning: Gently clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners.
- Inspect Wiring: Periodically check the wiring for any signs of wear, damage, or loose connections. Ensure the corrugated tube protecting the wire is intact.
- Waterproof Integrity: While the camera is IP68 waterproof, avoid directing high-pressure water jets directly at the camera during car washes.
- Software Updates: If your Android head unit supports software updates for camera compatibility, ensure it is kept up-to-date.
A close-up image of the Ymiko HD fisheye camera, emphasizing its lens and the 'Start light nightvision TVI 720P' feature, indicating its capability for clear low-light recording.
An image showing the Ymiko Dash Cam TVI Car Camera being splashed with water, visually representing its IP68 waterproof and anti-fog capabilities, ensuring durability in wet conditions.
Troubleshooting
If you encounter issues with your Ymiko Dash Cam, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Loose cable connection, incorrect input selection on head unit, power issue. | Check all AV and power cable connections. Ensure your Android screen is set to the correct video input (TVI 30). Verify the camera is receiving power. |
| Image is blurry or distorted | Dirty lens, damaged cable, incompatible display settings. | Clean the camera lens. Inspect the AV cable for damage. Confirm your Android screen supports TVI 30 input and is configured correctly. |
| Image is mirrored (when used as front camera) | Camera is designed for rear view and does not have a non-mirrored output option. | This camera is primarily designed for rear view applications. If a non-mirrored image is required for front camera use, this model may not be suitable as it defaults to a mirrored image. |
| Night vision is poor | Extremely low light conditions, dirty lens. | Ensure the lens is clean. While it has starlight night vision, extreme darkness may still limit visibility. |
Important Note:
As noted in customer feedback, this camera defaults to a mirrored image, making it suitable primarily for rear-view applications. It does not offer an option to revert to an original, non-mirrored image for front camera use.
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | Ymiko |
| Model Number | Ymiko19tr6ng3d5382 |
| Image Sensor | Color HD chips |
| Horizontal Resolutions | 1000 TV lines |
| Horizontal Angle | 150-180 Degree |
| Photosensitive Area | Approx. 3.8x2.9 mm (0.15x0.11in) |
| Shutter Speed | 1-1/12000 |
| Gamma No. | 0.45 |
| Minimum Illumination | 0.01LM/F=1.2 (0 LM with IR on) |
| Video Output | RCA connector |
| Power Consumption | About 70MA |
| Power Supply | DC12V |
| Waterproof Rate | IP68 |
| Night Vision | Color camera |
| Compatible Devices | Monitor (Android large screens supporting TVI 30 input) |
| Installation Type | Surface Mount |
| Lens Type | Wide Angle |
| Optical Sensor Technology | CMOS |
| Video Capture Resolution | 1080p |
Warranty and Support
For warranty information and technical support, please contact Ymiko customer service.
- Return Policy: This product typically has a 30-day return/replacement policy. Please refer to your purchase platform for specific details.
- Manufacturer Support: For product-specific inquiries or technical assistance, please visit the official Ymiko store or contact their support channels.
- Online Resources: Additional support and FAQs may be available on the Ymiko brand store page: Ymiko Store.