1. Introduction
The GOOLOO GE1200 Jump Starter is a powerful and versatile portable device designed to jump start 12V vehicles with up to 8.0L gas or 6.0L diesel engines. Beyond its primary function, it also serves as a portable power bank with USB quick charge capabilities and features an integrated LED light for emergencies. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your GE1200 Jump Starter.
Image: The GOOLOO GE1200 Jump Starter unit, smart jumper cables, USB-C charging cable, and carrying case.
2. Important Safety Information
Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always wear eye protection and gloves when working with batteries.
- Do not immerse the unit in water or expose it to heavy rain.
- Do not operate the unit if it has been severely damaged or dropped.
- Keep out of reach of children.
- Ensure proper polarity connection (positive to positive, negative to negative) to avoid sparks or damage.
- Do not jump start a frozen battery.
- Do not use the jump starter as a vehicle battery charger.
- Store the unit in a cool, dry place away from direct sunlight and heat.
Image: Visual representation of the GE1200's upgraded safety protections, including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, over-load, and reverse-charge protection.
3. Package Contents
Verify that all items are present in your package:
- GOOLOO GE1200 Jump Starter Unit
- Smart Jumper Cable
- USB-C Charging Cable
- Carrying Case
- User Manual (this document)
- Packing Box
Image: An exploded view showing the GOOLOO GE1200 Jump Starter, carrying case, user manual, USB-C charging cable, smart jumper cable, and the packing box.
4. Product Features and Components
Familiarize yourself with the key features and ports of your GOOLOO GE1200:
- LED Indicator: Shows battery level and charging status.
- Switch On/OFF: Power button for the unit.
- Jumper Cable Port: Dedicated port for connecting the smart jumper cables.
- Input (5V/3A): USB-C port for charging the jump starter unit.
- Output (15V/10A): DC output port for powering 12V car accessories.
- USB Output (5V/2.4A): Standard USB port for charging mobile devices.
- USB Quick Charge Output (5V/9V/12V): Quick charge USB port for faster device charging.
- LED Light: Multi-mode flashlight for illumination and emergency signaling.
- LED Light Switch: Button to control the LED light modes.
Image: A detailed diagram highlighting the various ports and indicators on the GOOLOO GE1200 Jump Starter, including LED indicators, power switch, jumper cable port, input/output ports, and LED light with its switch.
5. Setup and Charging
Before first use, fully charge your GOOLOO GE1200 Jump Starter. It is recommended to fully charge the unit every 3-6 months to maintain battery health, even if not in use.
5.1 Charging the Jump Starter
The GE1200 can be charged using a wall charger or a car charger (adapters not included).
- Connect the USB-C charging cable to the "Input 5V/3A" port on the jump starter.
- Connect the other end of the USB-C cable to a compatible USB wall adapter (5V/3A recommended) or a car charger.
- The LED indicators will light up to show the charging progress. All indicators will be solid when fully charged.
A full charge typically takes approximately 3-4 hours.
Image: The GOOLOO GE1200 Jump Starter connected to a wall outlet via a USB wall charger, illustrating the charging process.
Image: The GOOLOO GE1200 Jump Starter connected to a car's cigarette lighter socket via a car charger, demonstrating in-car charging.
6. Operating Instructions
6.1 Jump Starting a Vehicle
The GOOLOO GE1200 can jump start most 12V cars, motorcycles, SUVs, and motorboats up to 25 times on a full charge.
- Insert: Insert the blue plug of the smart jumper cable into the 12V Car Jump Start port on the jump starter. Ensure it is fully inserted.
- Connect: Connect the red clamp (+) to the vehicle's positive battery terminal and the black clamp (-) to the vehicle's negative battery terminal. The intelligent jump cable can read the vehicle's battery voltage and notify you of wrong operations by a warning symbol and buzzing.
- Light Up: Once connected correctly, the LED indicator on the smart jumper cable will turn solid green. If it flashes or shows red, check your connections.
- Start: Start your car engine within 30 seconds. If the vehicle does not start, disconnect the jumper cables from the jump starter and the car battery, wait for 30 seconds, and then reconnect. Do not attempt more than 3 consecutive jump starts.
- After the vehicle starts, remove the jumper clamps from the car battery first, then disconnect the smart jumper cable from the jump starter.
Image: A four-step visual guide demonstrating how to jump start a vehicle: 1. Insert the jumper cable into the booster, 2. Connect the jumper cable to the car battery, 3. Observe the LED indicator for correct connection, 4. Start the car engine.
Image: The GOOLOO GE1200 Jump Starter connected to a car battery, illustrating its capability to start dead vehicles like cars, motorcycles, SUVs, and motorboats with 2000A peak current, supporting up to 8.0L gas or 6.0L diesel engines, and providing up to 25 starts per charge.
6.2 Using as a Power Bank
The GE1200 features dual USB ports (5V/2.4A and 5V/9V/12V Quick Charge) and a 15V/10A DC output port, allowing you to charge various electronic devices and power car accessories.
- Connect your device's USB charging cable to either of the USB output ports on the jump starter.
- For car accessories like tire inflators or car vacuum cleaners, use the 15V/10A DC output port.
Image: The GOOLOO GE1200 Jump Starter with two USB cables connected, charging a smartphone and a tablet, demonstrating its dual output quick charging capability.
Image: The GOOLOO GE1200 Jump Starter connected to a tire inflator via its 15V/10A DC output port, showcasing its ability to power car accessories.
6.3 Using the LED Emergency Light
The built-in LED light has three modes: continuous light, strobe, and SOS signal.
- Press the LED Light Switch once for continuous light.
- Press again for strobe mode.
- Press a third time for SOS mode.
- Press a fourth time to turn off the light.
Image: A man using the GOOLOO GE1200 Jump Starter as a flashlight to illuminate a car engine bay, with icons indicating Normal, Strobe, and SOS light modes.
Image: The GOOLOO GE1200 Jump Starter's LED light illuminating a dark space, with examples of its three modes: Normal for camping, Strobe for emergency, and SOS for road trips.
7. Maintenance
- Keep the jump starter clean and free from dust and moisture.
- Store the unit in a cool, dry environment, ideally between -4°F and 140°F (-20°C and 60°C).
- Recharge the unit every 3-6 months to ensure optimal performance and extend battery life, even if it has not been used.
- Do not attempt to disassemble the unit. Refer all servicing to qualified service personnel.
Image: The GOOLOO GE1200 Jump Starter depicted in both desert heat (140°F) and snowy conditions (-4°F), highlighting its ability to operate in extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start. | Low charge on jump starter, incorrect connection, severely dead battery. | Ensure jump starter is fully charged. Check cable connections for proper polarity. Wait 30 seconds and try again. If battery is severely dead, it may require professional assistance. |
| Smart jumper cable indicator flashes or shows red. | Incorrect connection (reverse polarity), short circuit, or other error. | Immediately disconnect clamps from the battery. Re-read instructions and ensure correct positive (+) and negative (-) connections. The unit's intelligent protection system will prevent damage. |
| Jump starter not charging. | Faulty charging cable, adapter, or port. | Try a different USB-C cable and/or wall adapter. Ensure the charging port on the unit is clean and free of debris. |
| LED light not working. | Unit is off, low battery, or switch issue. | Ensure the unit is powered on. Check battery level and recharge if necessary. Press the LED Light Switch multiple times to cycle through modes. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | GOOLOO |
| Model Number | GE1200 |
| Peak Output Current | 2000 Amps |
| Product Dimensions | 4.92"D x 7.67"W x 4.13"H |
| Item Weight | 1.2 Pounds |
| Battery Type | Lithium Polymer |
| Engine Compatibility | Up to 8.0L Gas or 6.0L Diesel Engine |
| USB Output 1 | 5V/2.4A |
| USB Output 2 (Quick Charge) | 5V/9V/12V |
| DC Output | 15V/10A |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| First Available Date | April 15, 2021 |
10. Warranty and Support
GOOLOO stands behind the quality of its products. The GE1200 Jump Starter comes with:
- 18 Months Warranty: Covering manufacturing defects and malfunctions under normal use.
- 30-Day Unconditional Return Guarantee: For peace of mind.
- Lifetime Customer & Technical Support: Access to assistance whenever you need it.
- 24 Hours, 7x24 Customer Support: Dedicated support team available around the clock.
For any inquiries, technical assistance, or warranty claims, please contact GOOLOO customer support through their official website or the platform where you purchased the product.
Image: A graphic detailing GOOLOO's customer support offerings, including 24-hour support, 30-day return guarantee, 18-month warranty, and lifetime technical support.
