EarFun Free 2

EarFun Free 2 Wireless Earbuds User Manual

Model: Free 2

Introduction

Thank you for choosing the EarFun Free 2 Wireless Earbuds. This manual provides detailed instructions on how to set up, operate, and maintain your earbuds to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Do not disassemble or modify the earbuds or charging case.
Keep the device away from extreme temperatures, humidity, and liquids.
Avoid prolonged exposure to high volume levels to prevent hearing damage.
Clean the earbuds regularly with a soft, dry cloth.
Dispose of the device responsibly according to local regulations.

Package Contents

Please check that all items are present in your package:

EarFun Free 2 Wireless Earbuds (L/R)
Charging Case
USB-C Charging Cable
Ear Tips (S/M/L)
User Manual

Product Overview

EarFun Free 2 Wireless Earbuds and Charging Case

Image: The EarFun Free 2 Wireless Earbuds are shown inside their open charging case. The case is black with a matte finish. One earbud is partially visible in its charging slot, while the other is shown removed from the case, positioned above it. Both earbuds are black with the "earfun" logo visible on their outer surface. A blue indicator light is visible on the earbud outside the case, and another on the earbud inside the case, indicating power or charging status.

The EarFun Free 2 consists of two wireless earbuds and a portable charging case. Each earbud features a touch control area, microphone, and charging contacts. The charging case has a USB-C port for charging and LED indicators for battery status.

Setup

1. Initial Charge

Before first use, fully charge both the earbuds and the charging case. Place the earbuds into the charging case and connect the USB-C cable to the charging port on the case and a power source. The LED indicators on the case will show charging status.

2. Pairing with Your Device

Ensure the earbuds are fully charged.
Open the charging case. The earbuds will automatically enter pairing mode (indicated by a flashing blue light on the earbuds).
On your device (smartphone, tablet, etc.), enable Bluetooth.
Search for "EarFun Free 2" in the list of available Bluetooth devices and select it to connect.
Once connected, a voice prompt will confirm successful pairing.

Note: If pairing fails, place the earbuds back into the case, close the lid, then open it again and repeat the steps.

3. Wearing the Earbuds

Choose the ear tips that provide the best seal and comfort for your ears. Gently insert the earbuds into your ear canal and twist them slightly to secure a snug fit. A proper fit is crucial for optimal sound quality and noise isolation.

Operating Instructions

Power On/Off

Power On: Open the charging case, and the earbuds will automatically power on.
Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.

Touch Controls

Function	Action
Play/Pause	Single tap on either earbud
Next Track	Double tap on the Right earbud
Previous Track	Double tap on the Left earbud
Volume Up	Triple tap on the Right earbud
Volume Down	Triple tap on the Left earbud
Answer/End Call	Single tap on either earbud
Reject Call	Press and hold either earbud for 2 seconds
Activate Voice Assistant	Press and hold the Left earbud for 2 seconds
Game Mode On/Off	Press and hold the Right earbud for 2 seconds

Maintenance

Cleaning: Regularly clean the ear tips and charging contacts with a dry, soft cotton swab. Do not use harsh chemicals or abrasive materials.
Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged.
Battery Care: To prolong battery life, avoid fully discharging the earbuds and case frequently. Charge them regularly, even if not in constant use.
Water Resistance: The earbuds are IPX7 waterproof. However, ensure they are completely dry before placing them back into the charging case to prevent damage to the charging contacts.

Troubleshooting

Problem	Possible Solution
Earbuds not connecting to device	Ensure Bluetooth is enabled on your device. Check if "EarFun Free 2" is selected in your device's Bluetooth settings. Place earbuds back in case, close lid, then open to re-enter pairing mode. Forget "EarFun Free 2" from your device's Bluetooth list and re-pair.
Only one earbud playing sound	Ensure both earbuds are charged. Place both earbuds back into the charging case, close the lid, and then open it again. Try resetting the earbuds (refer to the full user manual for specific reset instructions if needed).
Low volume or poor sound quality	Adjust the volume on both your device and the earbuds. Ensure ear tips provide a proper seal in your ear canal. Clean any debris from the ear tips and earbud nozzles.
Earbuds not charging	Ensure the charging cable is securely connected to both the case and the power source. Check if the charging contacts on the earbuds and inside the case are clean and free of debris. Try a different USB-C cable or power adapter.

Specifications

Model: Free 2
Bluetooth Version: 5.2
Bluetooth Profile: A2DP, AVRCP, HFP, HSP
Bluetooth Codec: aptX, AAC, SBC
Operating Range: Up to 15m (without obstacles)
Battery Capacity (Earbud): 50mAh
Battery Capacity (Charging Case): 400mAh
Playtime: Up to 7 hours (earbuds), 30 hours (with charging case)
Charging Time (Earbuds): Approx. 1.5 hours
Charging Time (Case): Approx. 2 hours
Water Resistance: IPX7
Microphones: 4 (cVc 8.0 Noise Reduction)

Warranty and Support

EarFun products come with a standard warranty. For detailed warranty information, product registration, or technical support, please visit the official EarFun website or contact their customer service. Please have your product model and purchase details ready when contacting support.

Website: www.myearfun.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.