Introduction
Thank you for choosing Yaheetech Dining Chairs. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.
Product Features
- Selected Materials: Faux leather, solid wood, composite board, foam, and rubberwood construction.
- Easy Maintenance: Wear-proof faux leather seats simplify cleaning and enhance texture.
- Curved Backrest: Ergonomically designed to fit body shape and offer strong support for extended comfort.
- Anti-skid Protection: Foot pads on chair legs prevent floor scratching and accidental sliding.
- Comfortable Seating Experience: Soft and smooth faux leather upholstery with high-density foam padding and a supportive high backrest.
Image: High-density foam cushion and waterproof faux leather surface for comfortable seating.
Safety Information
- Do not exceed the maximum weight capacity of 300 pounds (135 kg) per chair.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the chairs.
- Keep children away from the assembly area during installation.
- Use the chairs on a flat, stable surface to prevent tipping.
- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Before beginning assembly, ensure all parts listed below are present. If any parts are missing or damaged, please contact customer support.
- Chair Backrest (1 per chair)
- Chair Seat (1 per chair)
- Front Legs (2 per chair)
- Rear Legs (2 per chair)
- Hardware Pack (screws, washers, Allen wrench)
Video: Yaheetech PU Leather Dining Chairs Installation Guide. This video demonstrates the assembly process for the dining chairs.
Setup and Assembly
Follow these steps to assemble your Yaheetech Dining Chairs. An Allen wrench is included in the hardware pack.
- Attach Front Legs: Align the front legs to the designated holes on the underside of the chair seat. Secure them using the provided screws and washers. Hand-tighten initially.
- Attach Rear Legs: Similarly, attach the rear legs to the underside of the chair seat, securing with screws and washers. Hand-tighten initially.
- Attach Backrest: Connect the chair backrest to the seat and legs, ensuring proper alignment. Insert the remaining screws and washers.
- Final Tightening: Once all parts are loosely assembled, place the chair upright on a flat surface. Apply slight pressure to ensure all legs are balanced. Then, fully tighten all screws using the Allen wrench. Do not overtighten.
- Install Foot Pads: Screw the adjustable foot pads into the bottom of each leg. Adjust them as needed to ensure the chair is stable and does not wobble.
Image: Visual guide for chair assembly steps.
Usage Instructions
These dining chairs are designed for indoor use in dining rooms, kitchens, and living rooms. They are suitable for dining purposes and provide comfortable seating for adults.
- Always sit properly on the chair with both feet on the floor.
- Avoid sudden movements or excessive force that could damage the chair or cause injury.
- Do not use the chair as a step stool or ladder.
Maintenance and Care
To ensure the longevity and appearance of your dining chairs, follow these care instructions:
- Cleaning: Wipe clean with a damp cloth. For tougher stains on the faux leather, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
- Protect from Heat: Keep chairs away from direct heat sources like radiators or fireplaces.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles | Uneven floor or loose connections. | Adjust the foot pads on the bottom of the legs. Ensure all screws are tightened evenly. |
| Screws become loose over time | Normal wear and tear from use. | Periodically check and re-tighten all screws with the provided Allen wrench. |
| Faux leather appears dull or dirty | Accumulation of dust or spills. | Wipe with a damp cloth. For stubborn marks, use a mild soap solution and dry thoroughly. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | YT-00103465-001 |
| Color | Dark Gray |
| Material | Faux Leather, Solid Wood, Composite Board, Foam, Rubberwood |
| Product Dimensions (D x W x H) | 22.5" x 18" x 36.5" |
| Seat Height | 20 Inches |
| Seat Depth | 16.5 inches |
| Maximum Weight Recommendation | 300 Pounds (135 kg) |
| Item Weight (per chair) | Approx. 13.86 lbs (6.29 kg) - Calculated from 55.45 lbs for 4 chairs |
| Assembly Required | Yes |
| Indoor Outdoor Usage | Indoor |
Warranty and Support
Yaheetech offers a 30-day easy return policy for this product. For any questions, concerns, or to inquire about extended protection plans (2-Year or 3-Year Protection Plan), please contact Yaheetech customer support through your purchase platform or visit the official Yaheetech website.
Contact Information:
- Customer Service: Refer to your purchase platform for direct contact.
- Website: www.yaheetech.shop (Example, please verify actual website)
