Introduction
This manual provides comprehensive instructions for the EPOS | Sennheiser Adapt 130T USB-C II headset. Designed for professionals, this wired, single-sided headset offers superior sound quality, enhanced comfort, and seamless connectivity, optimized for UC platforms and certified for Microsoft Teams. Please read this manual carefully to ensure proper use and maintenance of your device.
What's in the Box
Upon unboxing your EPOS | Sennheiser Adapt 130T USB-C II headset, please verify that all the following components are present:
- EPOS | Sennheiser Adapt 130T USB-C II Headset
- Quick Guide
- Safety Guide
Image: The EPOS | Sennheiser Adapt 130T USB-C II headset, showing its single earcup, adjustable headband, and microphone boom arm with integrated USB-C cable.
Setup
The EPOS | Sennheiser Adapt 130T USB-C II headset is designed for plug-and-play connectivity, ensuring a quick and easy setup process.
- Connect the Headset: Locate the USB-C connector on your headset cable. Insert the USB-C connector into an available USB-C port on your computer, tablet, or mobile phone.
- Automatic Recognition: Your operating system should automatically detect and install the necessary drivers for the headset. This process typically takes a few moments.
- Select as Audio Device: Once recognized, the headset should appear as an audio input and output device in your system's sound settings. For optimal performance, ensure it is selected as the default communication device in your operating system and communication applications (e.g., Microsoft Teams, Zoom).
Operating Instructions
The headset features an inline control unit for convenient management of calls and audio.
Image: A person wearing the EPOS | Sennheiser Adapt 130T USB-C II headset, demonstrating its comfortable on-ear design during use.
Call Control
- Answer/End Call: Press the dedicated call button on the inline control unit to answer an incoming call or end an active call.
- Volume Adjustment: Use the volume up (+) and volume down (-) buttons on the inline control unit to adjust the listening volume.
- Microphone Mute: Press the mute button on the inline control unit to mute or unmute your microphone during a call. An indicator light on the control unit may show the mute status.
Microphone Positioning
For optimal voice clarity, position the microphone boom arm approximately two fingers' width from the corner of your mouth. The boom arm is flexible and can be adjusted to your preference.
Maintenance
Proper care and maintenance will extend the lifespan of your headset and ensure continued performance.
- Cleaning: Use a soft, dry, lint-free cloth to clean the headset. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the earcup or control unit. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use, store the headset in a clean, dry place away from extreme temperatures and direct sunlight. The headset is designed to be easy to store and portable.
- Cable Care: Avoid sharp bends or kinks in the cable. Do not pull the cable to disconnect the headset; always grasp the USB-C connector.
Troubleshooting
If you encounter issues with your headset, please refer to the following common solutions:
- No Sound/Microphone Not Working:
- Ensure the USB-C connector is fully inserted into the port.
- Check your computer's sound settings to confirm the headset is selected as the default playback and recording device.
- Verify that the microphone is not muted via the inline control unit or your software application.
- Try connecting the headset to a different USB-C port or another compatible device to rule out a port issue.
- Poor Audio Quality:
- Ensure the volume is set to an appropriate level, avoiding excessively high or low settings.
- Check for any background applications that might be consuming system resources or interfering with audio.
- Clean the earcup and microphone areas to remove any debris that might affect sound.
- Call Control Buttons Not Responding:
- Ensure your communication software (e.g., Microsoft Teams) is running and properly configured to use the headset.
- Restart the communication application or your computer.
For more detailed troubleshooting or persistent issues, please refer to the official EPOS support resources or the full user guide PDF linked in the warranty section.
Specifications
| Model Name | ADAPT 130T USB-C II |
| Connectivity Technology | Wired (USB-C) |
| Headphones Jack | USB |
| Ear Placement | On Ear |
| Form Factor | On Ear |
| Control Type | Call Control (Inline Remote) |
| Compatible Devices | Tablets, Mobile phones, PCs with softphone capabilities |
| Item Weight | 3 Ounces (approx. 85 grams) |
| Product Dimensions | 8.7 x 6 x 1.1 inches |
| Material | Plastic |
| Recommended Uses | Calling, Professional Use |
Warranty and Support
Your EPOS | Sennheiser Adapt 130T USB-C II headset comes with a manufacturer's warranty. Please refer to the included Safety Guide for specific warranty terms and conditions applicable to your region.
For further assistance, technical support, or to download the complete user guide in PDF format, please visit the official EPOS website or access the user guide directly via this link: EPOS | Sennheiser Adapt 130T USB-C II User Guide (PDF).
