1. Product Overview
The Ryobi RHT36B61R Hedge Trimmer is a powerful and efficient tool designed for maintaining hedges and shrubs. It features a 36V motor, a 60cm laser-cut diamond blade, and a 26mm cutting capacity, making it suitable for various branch sizes. The ergonomic design and rotating handle enhance user comfort and control.
Key Features:
- 36V motor for cutting hard branches.
- 60cm laser-cut diamond blade for clean results.
- 26mm tooth gap for larger branches.
- Five-position rotating rear handle for comfortable use.
- HedgeSweep attachment for debris removal.

Figure 1: The Ryobi RHT36B61R Hedge Trimmer, including the main unit, blade cover, 36V battery, and charger.
2. Setup
Before first use, ensure all components are present and undamaged. Fully charge the battery using the provided charger. Insert the charged battery into the trimmer's battery compartment until it clicks securely into place. Always refer to the full manual for detailed assembly instructions and safety precautions.

Figure 2: A user demonstrating the proper handling of the Ryobi hedge trimmer while trimming a hedge, emphasizing the importance of safety gear.
3. Operating Instructions
To operate the hedge trimmer, ensure the battery is fully charged and properly inserted. Hold the trimmer firmly with both hands, ensuring a secure grip on both handles. Engage the safety switch and press the trigger to start the blades. Move the trimmer smoothly along the hedge, allowing the blades to cut through branches. The rotating rear handle can be adjusted to optimize comfort and control for different cutting angles. Always maintain a safe distance from the blades and wear appropriate personal protective equipment (PPE), including safety glasses and gloves.

Figure 3: A user demonstrating the Ryobi hedge trimmer in action, showcasing its maneuverability and effective cutting performance on a hedge.
4. Maintenance
The Ryobi RHT36B61R Hedge Trimmer is designed for low maintenance. To ensure optimal performance and longevity, follow these general guidelines:
- Cleaning: After each use, remove any debris, leaves, or small branches from the blades and housing. A stiff brush or cloth can be used.
- Blade Care: Keep the blades clean and sharp. Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation.
- Storage: Store the trimmer in a dry, indoor location, protected from moisture and extreme temperatures. Ensure the battery is removed before storing for extended periods.
- Battery Care: Follow the battery manufacturer's instructions for charging and storage to maximize battery life. Avoid fully discharging the battery before recharging.
Proper care, such as keeping the unit dry and stored indoors, will ensure the trimmer remains in good working condition without requiring frequent complex maintenance.
5. Troubleshooting
If you encounter issues with your Ryobi RHT36B61R Hedge Trimmer, consider the following common troubleshooting steps:
- Trimmer not starting: Ensure the battery is fully charged and properly inserted. Check that both safety switches (if applicable) and the trigger are fully engaged.
- Reduced cutting performance: The blades may be dull or dirty. Clean the blades and apply lubricant. If performance does not improve, the blades may need sharpening or replacement.
- Overheating: If the trimmer feels excessively hot, stop operation immediately and allow it to cool down. Ensure air vents are clear of debris. Prolonged heavy use can cause overheating.
- Unusual noises or vibrations: Discontinue use immediately. Check for loose parts, damaged blades, or obstructions. Do not operate if unusual noises persist.
For persistent issues or complex repairs, contact Ryobi customer support or an authorized service center. Do not attempt to disassemble the trimmer yourself.
6. Specifications
| Specification | Value |
|---|---|
| Brand | RYOBI |
| Model Number | RHT36C61R40F |
| Power Source | Battery Powered |
| Voltage | 36V |
| Battery Capacity | 4.0 Ah |
| Charging Time | 170 minutes |
| Blade Length | 60 cm (23.6 inches) |
| Max Cutting Capacity | 26 mm |
| Blade Speed | 1600 rpm |
| Item Weight (without battery) | 2.8 Kg |
| Item Weight (with battery) | 4.2 Kg |
| Product Dimensions | 23.62 x 23.62 x 23.62 inches |
| Sound Power Level (Lwa) | 96 dB(A) |
| Main Handle Vibration Level | 3.3 m/s² |
| Auxiliary Handle Vibration Level | 3.0 m/s² |
7. Warranty and Support
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Ryobi website. If you require technical assistance, spare parts, or service, please contact Ryobi customer support. Keep your proof of purchase for warranty claims.





