Revell 05175 Patrol Torpedo Boat PT-559 / PT-160 Model Kit 1:72 Scale Instruction Manual

Introduction

This manual provides detailed instructions for assembling the Revell 05175 Patrol Torpedo Boat PT-559 / PT-160 Model Kit. This 1:72 scale plastic model kit allows for the construction of a highly detailed replica of a World War II PT boat. Please read all instructions carefully before beginning assembly.

Safety Information

WARNING: Not suitable for children under 36 months due to small parts. Choking hazard. Adult supervision is recommended during assembly. Always use appropriate ventilation when working with model glues and paints. Keep all tools and materials out of reach of small children.

Package Contents

Verify that all components are present before starting assembly. The kit includes:

• Plastic model kit parts (146 pieces)
• Instruction manual
• Decal set

Image: Overview of the plastic sprue parts included in the Revell PT boat model kit. These parts are molded onto frames and need to be carefully removed for assembly.

Assembly Instructions

Assembly requires plastic model cement and hobby tools (not included). Follow the numbered steps in the included instruction booklet for detailed guidance.

1. Preparation

• Carefully remove all parts from the sprues using a hobby knife or sprue cutters.
• Clean any excess plastic (flash) from the parts using a hobby knife or fine sandpaper.
• Test fit parts before applying glue to ensure proper alignment.

2. Hull Assembly

The kit features a two-part hull. Carefully join the two hull halves together, ensuring a tight seam. Use plastic cement sparingly along the edges. Allow sufficient drying time.

Image: A fully assembled Revell PT-160 model boat, showcasing the completed hull and superstructure on its display stand.

3. Detailed Superstructure

Assemble the various components of the superstructure according to the instruction diagrams. This includes the bridge, gun mounts, and other deck features. Pay close attention to the orientation of smaller parts.

Image: A detailed view of the model's bridge and cockpit area, showing intricate controls and seating.

Image: A close-up of the forward section of the model, highlighting the gun turret and various deck fixtures.

4. Adding Details and Armaments

Attach the torpedo tubes, machine guns, and other small details to the deck and superstructure. Ensure all parts are securely glued. The kit includes a display stand for the finished model.

Image: A detailed view of the stern of the model, featuring the torpedo tubes and rear deck elements.

Image: An interior view of a section of the model, revealing internal compartments and seating arrangements.

Painting and Decals

Once assembly is complete and glue has fully dried, the model can be painted. Refer to the instruction manual for recommended color schemes. Apply decals carefully using water and a soft brush, following the decal placement guide.

Care and Display

To maintain the appearance of your finished model, keep it away from direct sunlight and extreme temperatures. Dust gently with a soft brush or compressed air. The included display stand provides a stable base for showcasing your model.

Troubleshooting

• Parts not fitting: Ensure all flash has been removed and parts are correctly oriented. Light sanding may be required.
• Missing parts: Double-check the sprues and packaging. If a part is genuinely missing, contact Revell customer support.
• Decals not adhering: Ensure the surface is clean and smooth. A decal setting solution may improve adhesion.

Specifications

Warranty and Support

For questions regarding missing parts, assembly issues, or general inquiries, please refer to the contact information provided in the original product packaging or visit the official Revell website for customer support.