1. Introduction
Thank you for choosing the Satco 65-534 LED Medium Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.
The Satco 65-534 is designed for outdoor use, providing efficient and durable illumination for various applications such as patios, yards, garages, and parking lots. Its robust construction and LED technology ensure long-lasting performance.
Image 1.1: Satco LED Medium Flood Light in an outdoor application.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture's requirements (100-277V).
- Do not handle the fixture with wet hands or when standing on wet or damp surfaces.
- This fixture is rated for outdoor wet locations. Ensure all connections are properly sealed to prevent water ingress.
- Do not attempt to modify or disassemble the fixture. There are no user-serviceable parts inside.
- Keep flammable materials away from the fixture during operation.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your supplier.
- Satco 65-534 LED Medium Flood Light (Quantity as purchased, e.g., 8 units)
- Knuckle Mount Assembly
- Mounting Plate
- Instruction Manual (this document)
Image 3.1: Example of multiple Satco 65-534 LED Medium Flood Lights included in a package.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | 65-534 |
| Power Consumption | 30W |
| Color Temperature | 3000K (Warm White) |
| Lumen Output | 3404 Lumens |
| Beam Angle | 110° |
| Input Voltage | 100-277V |
| Operating Temperature | -20°C to 45°C |
| CRI | 80+ |
| Lifespan | 50,000 hours |
| Finish | Bronze, UV stabilized powder coated |
| Material | Die-cast Aluminum Body |
| Mounting Type | Knuckle Mount (1/2 inch) |
| IP Rating | IP65 (Dust tight and protected against water jets) |
| Dimensions | 9.19 x 7.09 x 1.91 inches (approximate) |
Image 4.1: Product label detailing features and specifications.
5. Installation (Setup)
Important: Ensure power is disconnected at the circuit breaker before beginning installation.
5.1 Pre-installation Checklist
- Verify that the installation location is suitable for outdoor wet-rated fixtures.
- Confirm that the electrical supply meets the fixture's voltage requirements (100-277V).
- Gather necessary tools: screwdriver, wire strippers, electrical tape, waterproof sealant (if required for conduit connections).
5.2 Mounting the Fixture
The Satco 65-534 features a 1/2-inch knuckle mount for versatile installation.
- Attach the provided mounting plate to a sturdy surface (e.g., wall, pole, junction box) using appropriate hardware (not included). Ensure the mounting surface can support the weight of the fixture.
- Thread the 1/2-inch knuckle mount of the flood light into the mounting plate or a compatible conduit fitting. Tighten securely.
- Adjust the angle of the flood light to the desired position. Tighten the adjustment screws on the knuckle mount to secure the angle.
Image 5.1: Rear view of the flood light with knuckle mount.
5.3 Electrical Wiring
Follow these steps for electrical connections:
- Identify the fixture's wires: Black (Line/Hot), White (Neutral), Green (Ground).
- Connect the fixture's Black wire to the supply's Line/Hot wire.
- Connect the fixture's White wire to the supply's Neutral wire.
- Connect the fixture's Green wire to the supply's Ground wire.
- Secure all connections with approved wire connectors and ensure they are properly insulated with electrical tape or heat shrink tubing, especially for outdoor applications.
- Ensure all wiring is contained within a weatherproof junction box or conduit system, sealed to prevent moisture entry.
6. Operation
Once installation and wiring are complete and verified, restore power at the circuit breaker. The Satco 65-534 LED Medium Flood Light will illuminate. This fixture is designed for direct power connection and does not include integrated controls such as motion sensors or dimming capabilities unless connected to external compatible devices.
Image 6.1: Front view of the LED flood light.
7. Maintenance
The Satco 65-534 LED Medium Flood Light is designed for minimal maintenance due to its long-life LED technology and durable construction.
- Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect light output. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the mounting hardware and wiring. Address any issues promptly.
- LEDs: The LEDs are integrated and not user-replaceable. If the light fails, the entire fixture typically requires replacement.
8. Troubleshooting
If the flood light is not operating correctly, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply | Check circuit breaker and wall switch. Ensure power is restored. |
| Incorrect wiring | Disconnect power and verify all wire connections are secure and correct. | |
| Faulty fixture | If power and wiring are confirmed correct, the fixture may be faulty. Contact customer support. | |
| Light flickers or dims | Unstable power supply | Consult an electrician to check the stability of your electrical circuit. |
| Loose connection | Disconnect power and check all wire connections for tightness. | |
| Reduced light output | Dirty lens | Clean the lens with a soft, damp cloth. |
| Fixture nearing end of life | LEDs have a long lifespan, but output can gradually decrease over many years. |
If troubleshooting steps do not resolve the issue, contact Satco customer support for further assistance.
9. Warranty and Support
The Satco 65-534 LED Medium Flood Light comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use and service. This warranty does not cover damage caused by improper installation, misuse, abuse, accidents, or unauthorized modifications.
For warranty claims or technical support, please contact Satco customer service. You may be required to provide proof of purchase and the product model number (65-534).
For more information, visit the official Satco website: www.satco.com
