Introduction
This manual provides detailed instructions for the safe and efficient operation, maintenance, and care of your new AIRMSEN CM1705BATE Drip Coffee Maker. Please read all instructions carefully before first use and retain this manual for future reference.
Figure 1: The AIRMSEN CM1705BATE Drip Coffee Maker.
Important Safety Instructions
- Read all instructions before operating the coffee maker.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Scalding may occur if the lid is removed during the brewing cycles.
Components Overview
Familiarize yourself with the parts of your coffee maker:
- Water Reservoir: Holds water for brewing. Features an easy-to-view water window.
- Control Panel: Digital display with buttons for programming, setting time, brew strength, and auto-off.
- Filter Basket: Holds the reusable coffee filter.
- Reusable Filter: Eliminates the need for paper filters.
- Glass Carafe: 10-cup capacity for brewed coffee.
- Heating Plate: Keeps the brewed coffee warm.
- Showerhead: Dispenses water evenly over coffee grounds for optimal extraction.
Figure 2: Overview of the coffee maker's features and design.
Setup
- Unpacking: Carefully remove all packaging materials and labels from your coffee maker.
- Initial Cleaning: Before first use, wash the glass carafe, carafe lid, and reusable filter in warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the coffee maker with a soft, damp cloth.
- First Brew Cycle (without coffee):
- Fill the water reservoir to the MAX (10-cup) level with fresh, cold water.
- Place the empty reusable filter into the filter basket, and ensure the carafe is correctly positioned on the heating plate.
- Press the 'BREW/OFF' button to start a brewing cycle. This will clean the internal components.
- Once the cycle is complete, discard the water from the carafe. Your coffee maker is now ready for use.
Figure 3: Filling the water reservoir.
Operating Instructions
- Fill Water Reservoir: Open the top lid and fill the water reservoir with fresh, cold water to your desired level, indicated by the water level markings. Do not exceed the MAX fill line.
- Add Coffee Grounds: Place the reusable filter into the filter basket. Add your desired amount of ground coffee into the filter. For best results, use 1 tablespoon of ground coffee per cup. Close the top lid securely.
- Position Carafe: Ensure the empty glass carafe with its lid is correctly placed on the heating plate.
- Set Current Time: When plugged in, the LCD display will show '12:00'. Press the 'HOUR' and 'MINUTE' buttons to set the current time. The time will automatically set after 5 seconds of inactivity.
- Brew Coffee:
- Immediate Brew: Press the 'BREW/OFF' button. The indicator light will illuminate, and brewing will begin.
- Programmed Brew (Delay Brew): Press the 'PROGRAM' button. The display will flash 'PROGRAM'. Use the 'HOUR' and 'MINUTE' buttons to set your desired brew time. Press 'PROGRAM' again to confirm. The 'PROGRAM' indicator light will illuminate. The coffee maker will automatically start brewing at the set time.
- Brew Strength Selection: Press the 'BOLD/CLEAN' button once before brewing to select 'BOLD' for a stronger coffee. The 'BOLD' indicator light will illuminate. Press again to return to regular strength.
- Keep Warm Function: After brewing, the heating plate will automatically activate to keep coffee warm. You can adjust the keep warm temperature (Low, Medium, High) and duration (0-4 hours) using the 'CARAFE TEMP+/-' button. The coffee maker will automatically shut off after the set keep warm duration.
Figure 4: Adding coffee grounds to the reusable filter.
Figure 5: The control panel for setting time and programming brew cycles.
Video 1: Demonstrating the features and operation of the AIRMSEN CM1705BATE Coffee Maker.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your coffee maker.
- Daily Cleaning:
- Always unplug the coffee maker before cleaning.
- Wash the glass carafe, carafe lid, and reusable filter after each use in warm, soapy water. These parts are also top-rack dishwasher safe.
- Wipe the exterior of the coffee maker with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
- Do not immerse the coffee maker base in water or any other liquid.
- Descaling (Self-Cleaning Function): Mineral deposits (calcium) can build up in your coffee maker over time, affecting performance. The coffee maker features a self-cleaning reminder and function.
- When the 'CLEAN' indicator light illuminates, it's time to descale.
- Fill the water reservoir with a mixture of 1 part white vinegar and 2 parts water.
- Place the empty reusable filter in the filter basket and the empty carafe on the heating plate.
- Press and hold the 'BOLD/CLEAN' button for 3 seconds to activate the self-cleaning cycle. The 'CLEAN' light will flash.
- The cleaning cycle will run for approximately 45 minutes. Once complete, the coffee maker will automatically shut off.
- Run two full cycles with fresh, cold water to rinse out any remaining vinegar solution.
Figure 6: The 'BOLD/CLEAN' button used for descaling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee maker does not turn on. | Not plugged in; power outage; circuit breaker tripped. | Ensure the unit is securely plugged into a working outlet. Check your home's circuit breaker. |
| Coffee is not brewing. | Water reservoir empty; carafe not properly placed; brew cycle not initiated. | Fill water reservoir. Ensure carafe is correctly positioned. Press 'BREW/OFF' button. |
| Coffee is too weak or too strong. | Incorrect coffee-to-water ratio; 'BOLD' setting not selected (or selected when not desired). | Adjust the amount of coffee grounds. Use the 'BOLD' setting for stronger coffee. |
| Water or coffee leaks. | Carafe not properly seated; overfilled water reservoir; filter basket overflowing. | Ensure carafe is correctly positioned. Do not overfill the water reservoir. Ensure the filter basket is not clogged and coffee grounds are not overflowing. |
| 'CLEAN' indicator light is on. | Time to descale the coffee maker. | Perform the self-cleaning cycle as described in the Maintenance section. |
Specifications
- Brand: AIRMSEN
- Model Number: CM1705BATE
- Coffee Maker Type: Drip Coffee Machine
- Capacity: 10 Cups (1800ML water tank)
- Color: Stainless Steel
- Operation Mode: Fully Automatic
- Product Dimensions: 7.8 x 8 x 13.4 inches
- Item Weight: 6.49 pounds
- UPC: 191892944821
- Features: Programmable, 4-Hour Warming, Reusable Filter, Self-Cleaning Function, Brew Strength Selector.
Figure 7: Product dimensions.
Warranty and Support
Your AIRMSEN Drip Coffee Maker is covered by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please refer to the warranty card included with your purchase or contact AIRMSEN customer service directly. Keep your purchase receipt as proof of purchase.
