GoolRC WLtoys 104001 RC Car Instruction Manual

1. Product Overview

The GoolRC WLtoys 104001 is a 1:10 scale, 4WD high-speed remote control racing car designed for all-terrain off-road use. It features a durable aluminum alloy chassis, zinc alloy gears, and a powerful motor, capable of reaching speeds up to 45KM/H. This manual provides essential information for safe and optimal operation of your RC car.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x RC Car
• 1 x Remote Controller
• 1 x Car Battery
• 1 x Charger
• 1 x Instruction Manual
• 1 x Cross Socket Wrench

3. Features

The GoolRC WLtoys 104001 RC Car boasts several advanced features for an enhanced driving experience:

• High-Speed Performance: Equipped with a powerful 550 motor, this RC car converts electricity into power efficiently, achieving speeds up to 45km/h. The 4WD system provides strong torque for dynamic maneuvers.

  

• 2.4GHz Remote Control Frequency: The 2.4GHz radio system offers anti-jamming capabilities, allowing multiple cars to race simultaneously without interference. The control distance extends up to 100 meters.
• Conquer Various Terrains: Featuring hardware oil pressure shock absorbers and all-terrain adaptable tires, the car ensures stable dynamic performance across diverse surfaces. It is suitable for sand, meadows, mountain roads, or rocky paths.

  

• High Quality Material: Constructed with metal parts, a high-strength aluminum alloy frame, and zinc alloy gears, the car is designed for long service life, crashworthiness, and durability. It also supports DIY upgrades.

  

  

4. Setup

4.1. Battery Installation and Charging

1. Car Battery: Carefully open the battery compartment on the RC car. Connect the car battery to the car's power connector, ensuring correct polarity. Securely place the battery in the compartment and close the cover.
2. Remote Controller Batteries: Open the battery compartment on the back of the remote controller. Insert 4 * AA batteries (not included), observing the correct positive (+) and negative (-) terminals. Close the compartment.
3. Charging: Connect the car battery to the provided charger. Plug the charger into a suitable power outlet. The indicator light on the charger will show the charging status. Once fully charged, disconnect the battery from the charger.

4.2. Remote Controller Overview

Familiarize yourself with the functions of the remote controller:

• Power ON/OFF: Switch to turn the controller on or off.
• Power Indicator: Light indicating power status.
• Steer Wheel: Controls the direction of the car (left/right).
• Forward/Backward Trigger: Controls the speed and direction of the car (forward/reverse).
• Steering Trim: Adjusts the steering to ensure the car drives straight when the steering wheel is centered.
• Speed Trim: Adjusts the maximum speed output.
• Mode: Selects different driving modes (if applicable).

4.3. Binding the Remote Controller and Car

To establish a connection between the remote controller and the RC car:

1. Ensure both the car and the remote controller are powered off.
2. Turn on the RC car. The car's indicator light will flash.
3. Turn on the remote controller. The indicator light on the remote will flash.
4. Wait a few seconds for the lights on both the car and the remote to become solid, indicating a successful binding.
5. If binding fails, turn off both devices and repeat the process.

5. Operating Instructions

5.1. Basic Controls

• Forward/Accelerate: Pull the trigger towards you.
• Brake/Reverse: Push the trigger away from you.
• Steering: Turn the steering wheel left or right to control the car's direction.

5.2. Driving Tips

• Always operate the RC car in open areas free from obstacles, people, or pets.
• Avoid driving in wet conditions or through deep puddles to prevent damage to electronic components.
• Start with slow speeds to get accustomed to the controls before attempting high-speed maneuvers.
• Use the steering trim to fine-tune the car's straight-line tracking.

5.3. Product Demonstration Video

Watch this official video from the seller demonstrating the GoolRC WLtoys 104001 RC Car in action:

6. Maintenance

Regular maintenance will prolong the life and performance of your RC car:

• Cleaning: After each use, especially after driving in dusty or dirty conditions, clean the car with a soft brush or compressed air to remove debris. Avoid using water directly on electronic components.
• Battery Care: Always fully charge the battery before storage if it will not be used for an extended period. Do not overcharge or over-discharge the battery. Store batteries in a cool, dry place.
• Gear Inspection: Periodically check the zinc alloy gears for any signs of wear or damage. Ensure they are free of debris that could impede their movement.
• Shock Absorbers: Inspect the oil pressure shock absorbers for leaks or damage. Ensure they move freely and provide adequate damping.
• Screws and Fasteners: Regularly check all screws and fasteners to ensure they are tight. Vibrations from operation can cause them to loosen over time.

7. Troubleshooting

If you encounter issues with your GoolRC WLtoys 104001 RC Car, refer to the following common problems and solutions:

8. Specifications

Detailed specifications for the GoolRC WLtoys 104001 RC Car:

• Model Number: XKS 104001
• Scale: 1:10
• Drive System: 4WD
• Max Speed: Up to 45 KM/H
• Motor: 550 Brushed Motor
• Control Frequency: 2.4GHz
• Control Distance: Up to 100 meters
• Chassis Material: High-strength Aluminum Alloy
• Gear Material: Zinc Alloy
• Shock Absorbers: Hardware Oil Pressure
• Recommended Age: 14 years and up
• Package Dimensions: 18.8 x 10.8 x 5.2 inches
• Item Weight: 6.34 pounds
• Country of Origin: China
• Manufacturer: GoolRC

9. Warranty and Support

GoolRC is committed to providing high-quality products. For any issues, questions, or support needs regarding your WLtoys 104001 RC Car, please contact GoolRC customer service. Refer to the product packaging or the official GoolRC website for specific contact information and warranty details.