WoldoClean 2in1 Descaler Tablets

1. Introduction

The WoldoClean 2in1 Descaler Tablets are designed for the effective cleaning and descaling of various coffee machines and coffee makers. These tablets combine powerful cleaning agents with descaling properties to ensure optimal machine performance and preserve the rich flavor of your coffee. Regular use helps prevent limescale buildup, corrosion, and damage to critical components, extending the lifespan of your appliance.

2. Safety Information

CAUTION: CAUSES SERIOUS EYE IRRITATION. HARMFUL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN. SEE BACK FOR DETAILS.

In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. If swallowed, call a poison center or doctor immediately. Do not induce vomiting. Seek medical attention. Ingredients: Sulphamic acid, Sodium carbonate, Adipic acid. For espresso and coffee machines: Follow the instructions of your appliance manufacturer. Not suitable for marble, galvanised and enamelled floors.

3. Product Overview

WoldoClean 2in1 Descaler Tablets are unscented and come in a pack of 6 high-strength tablets, each individually wrapped for precise dosage and easy handling. They are formulated to provide both cleaning and descaling in one step.

Key Features:

• 2in1 Action: Combines powerful cleaning and descaling for exceptional machine performance.
• Wide Compatibility: Suitable for leading brands like Breville, Keurig, Nespresso, Delonghi, Miele, Cuisinart, and other coffee maker pots, including fully automatic, capsule, and drip machines.
• Extends Machine Lifespan: Effectively prevents limescale buildup, corrosion, and damage to critical components.
• Fast-Acting & Odorless: Removes limescale more efficiently than vinegar, preserving coffee flavor without unpleasant odors.

4. Operating Instructions

Always refer to your specific coffee machine's instruction manual for detailed descaling procedures. The following are general guidelines for using WoldoClean 2in1 Descaler Tablets.

General Steps:

1. Preparation: Ensure your coffee machine is empty of coffee grounds and any existing water filters are removed from the water tank.
2. Dissolve Tablet: Dissolve 1 WoldoClean 2in1 Descaler Tablet in 17 oz (500ml) of warm water (approximately 122°F / 50°C). Stir until fully dissolved (takes about 2 minutes).
3. Add Solution: Pour the dissolved solution into the empty water tank of your coffee machine.
4. Run Descaling Cycle: Activate the descaling program or brewing process on your machine. Allow the entire solution to run through.
5. Rinse Cycles: After the descaling cycle, remove the water tank, rinse it thoroughly, and refill it with fresh water. Run at least two full brewing cycles with fresh water to ensure all cleaning solution residue is removed.

Specific Instructions for Fully Automatic Machines:

1. Follow Device Instructions: Always consult your specific machine's manual for descaling.
2. Prepare Solution: Dissolve 1 tablet in 17 oz (500ml) of 122°F (50°C) warm water for 2 minutes and pour into the water tank.
3. Activate Program: Insert the tank and activate the descaling program/brewing process. Allow the solution to run through completely.
4. Rinse: Remove the tank, rinse out, and fill with fresh water. Carry out at least two runs for optimum results.

Instructional Videos:

Additional Instructions:

For more detailed instructions, including multilingual options, please refer to the official PDF manual available via the QR code on the product packaging or directly through this link: WoldoClean Descaling Tablets PDF

5. Regular Maintenance

For optimal performance and longevity of your coffee machine, it is recommended to use WoldoClean 2in1 Descaler Tablets regularly. The frequency depends on your water hardness and usage, but generally, descaling every 1-2 months is advised. This prevents mineral buildup that can affect heating efficiency and coffee taste.

6. Troubleshooting

Incomplete Descaling:

If you notice that limescale or residue remains after the initial descaling process, or if your machine's performance has not fully improved, repeat the descaling procedure. Ensure you are using the correct water temperature for dissolving the tablet and running sufficient rinse cycles.

Machine Not Functioning After Descaling:

Ensure all rinse cycles have been completed thoroughly. If issues persist, consult your coffee machine's specific troubleshooting guide or contact the manufacturer's support.

7. Specifications

8. Warranty and Support

For any product-related inquiries, support, or warranty information, please contact WoldoClean customer service directly. Refer to the contact details provided on the product packaging or visit the official WoldoClean website.