Guy-Tech AC Power Adapter (MB-201 Compatible)

Instruction Manual: AC Power Adapter for Mighty Bliss MB-201 Massager

Brand: Guy-Tech | Model: AC Power Adapter (MB-201 Compatible)

1. Introduction and Overview

This instruction manual provides essential information for the safe and effective use of your Guy-Tech AC Power Adapter, designed as a compatible replacement for the Mighty Bliss MB-201 Deep Tissue Cordless Body Massager. This adapter ensures reliable power supply for charging and operating your device.

Package Contents

  • 1 x AC Power Adapter

2. Safety Information

Please read all safety instructions carefully before using the power adapter. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

  • Indoor Use Only: This adapter is designed for indoor use in dry locations. Do not expose to rain, moisture, or extreme temperatures.
  • Proper Voltage: Ensure the wall outlet voltage matches the adapter's input voltage (100V - 240V worldwide).
  • Avoid Overloading: Do not overload power outlets or extension cords.
  • Handle with Care: Do not drop, disassemble, or attempt to repair the adapter. Refer all servicing to qualified personnel.
  • Unplug When Not in Use: Disconnect the adapter from the power outlet when not in use for extended periods.
  • Keep Away from Children: Store the adapter out of reach of children.

3. Setup Instructions

Follow these steps to set up your AC Power Adapter:

Connecting the Power Adapter

  1. Locate the DC input port on your Mighty Bliss MB-201 Deep Tissue Cordless Body Massager.
  2. Insert the barrel connector of the Guy-Tech AC Power Adapter firmly into the massager's DC input port.
  3. Plug the AC prongs of the power adapter into a standard wall outlet (100V-240V).
  4. The LED indicator on the adapter will illuminate, signifying that power is being supplied.
Guy-Tech AC Power Adapter with LED indicator and DC barrel connector
Figure 3.1: The Guy-Tech AC Power Adapter, showing the main unit with LED indicator and the DC barrel connector.

4. Operating Instructions

Once connected, the power adapter will begin supplying power to your Mighty Bliss MB-201 Massager.

Powering Your Device

  • The adapter provides consistent power for both charging the internal battery of your massager and for direct operation while plugged in.
  • Observe the LED indicator on the adapter. A steady light indicates proper power flow.
  • The adapter features a 7-foot cable, providing ample reach for convenient use.
Image highlighting the 7-foot cable length and LED indicator feature of the power adapter
Figure 4.1: Visual representation emphasizing the 7-foot cable length and the presence of an LED indicator on the adapter.

5. Care and Maintenance

Proper care and maintenance will extend the lifespan of your power adapter.

  • Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
  • Cable Integrity: Regularly inspect the cable for any signs of fraying, cuts, or damage. If damage is observed, discontinue use immediately.

6. Troubleshooting

If you encounter issues with your power adapter, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
Adapter LED not lit / Device not chargingNo power from outlet; Loose connection; Faulty adapterCheck wall outlet with another device; Ensure all connections are secure; Try a different outlet.
Device charges slowly or inconsistentlyLow quality/low current power source; Adapter not fully compatibleEnsure the adapter is plugged directly into a wall outlet, not a low-power USB port or faulty extension. Verify compatibility with your specific device model.
Adapter feels hot during useNormal operation; Overload; Poor ventilationA slight warmth is normal. Ensure adapter is in a well-ventilated area. If excessively hot, unplug immediately and contact support.

If the problem persists after trying these solutions, please contact customer support.

7. Product Specifications

Detailed technical specifications for the Guy-Tech AC Power Adapter:

FeatureDetail
BrandGuy-Tech
Input Voltage100V - 240V (Worldwide Compatible)
Output VoltageSpecific to device requirements (e.g., for Mighty Bliss MB-201)
Connectivity TechnologyDC Barrel
Cable Length7 Feet (approx. 2.13 meters)
Special FeatureLED Indicator, Over Voltage Protection, Over Current Protection, Short Circuit Protection
Item Weight5 ounces (approx. 141.7 grams)
Package Dimensions6.5 x 5.24 x 4.57 inches
ManufacturerGuy-Tech
Country of OriginChina
Power adapter plugged into a power strip, illustrating premium quality components, multipurpose use, stable output, and safety protections.
Figure 7.1: The adapter's design emphasizes premium quality components, stable output, and built-in safety protections.

8. Warranty and Customer Support

For any questions, concerns, or technical assistance regarding your Guy-Tech AC Power Adapter, please contact our customer support team. Refer to the product packaging or the seller's information for specific warranty details and contact methods.

We are committed to providing high-quality products and support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.