Introduction
Thank you for choosing the HOFTRONIC LED Tube Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- Always disconnect power before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not attempt to modify the product. Any modifications may void the warranty and pose safety risks.
- This product is designed for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
Setup Instructions
The HOFTRONIC LED Tube Light is designed for easy ceiling installation with the included mounting clips. The LED tubes are integrated, eliminating the need for separate tube purchases.
Package Contents
- HOFTRONIC LED Tube Light(s)
- Mounting clips
- Screws and wall plugs (may vary by package)
Installation Steps
- Prepare the Installation Area: Choose a suitable location on the ceiling. Ensure the power supply is turned off at the main circuit breaker.
- Mark Mounting Points: Hold the LED tube light against the ceiling at the desired position and mark the locations for the mounting clips.
- Install Mounting Clips: Drill holes at the marked points. Insert wall plugs (if necessary) and secure the mounting clips to the ceiling using screws.
- Wiring: Connect the fixture's electrical wires to your main power supply. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. This fixture operates on 230 Volts AC.
- Attach the Fixture: Carefully snap the LED tube light into the secured mounting clips. Ensure it is firmly seated.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker.
Operating Instructions
The HOFTRONIC LED Tube Light is designed for straightforward operation.
Turning On/Off
Once properly installed and connected to the power supply, the LED tube light can be switched on and off using a standard wall switch connected to the circuit. There are no additional controls on the fixture itself.
Lighting Characteristics
- Brightness: Each 40W fixture provides 4800 lumens of light, offering super bright illumination.
- Color Temperature: The light output is 6400 Kelvin, which is a daylight white color, ideal for task lighting and environments requiring high visibility.
- Flicker-Free: The advanced LED chips ensure flicker-free operation, reducing eye strain.
- Diffuse Light: The milky transparent lampshade ensures a 110-degree shadow-free light distribution, providing comfortable and uniform illumination.
Maintenance
The HOFTRONIC LED Tube Light requires minimal maintenance due to its durable design and long lifespan.
Cleaning
- Before cleaning, ensure the power supply to the fixture is disconnected.
- Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Ensure the fixture is completely dry before restoring power.
Lamp Replacement
The LED tubes are integrated and not designed for user replacement. The fixture has an average lifespan of 30,000 hours, providing many years of maintenance-free operation under normal use.
Troubleshooting
If you encounter issues with your HOFTRONIC LED Tube Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty wall switch | Check circuit breaker and wall switch. Verify all wiring connections are secure (ensure power is off first). Test the wall switch with another device. |
| Light flickers | Unstable power supply Loose connection Incompatible dimmer (if applicable) | Ensure stable power. Check connections. This fixture is not designed for dimming unless explicitly stated. |
| Reduced brightness | Dust accumulation Aging LED components | Clean the fixture's surface. LEDs have a long lifespan, but gradual lumen depreciation is normal over many years of use. |
If the problem persists after attempting these solutions, please contact HOFTRONIC customer support.
Specifications
| Brand | HOFTRONIC |
| Model Number | 4409593 |
| Product Dimensions (L x W x H) | 120 x 7.4 x 2.5 cm |
| Item Weight | 5 Kilograms (for 8-piece set) |
| Number of Items | 8 |
| Style | Modern |
| Color Temperature | 6400 Kelvin (Daylight White) |
| Shape | Tube |
| Material (Body) | Aluminum |
| Material (Lampshade) | Plastic |
| Included Components | Mounting clips |
| Voltage | 230 Volts AC |
| Specific Uses | Indoor only (e.g., home, garage, workshop, warehouse, store, cellar) |
| Special Features | Durable, 80% energy saving, Plug and Play, Ultra-flat (2.5 mm) |
| Lighting Angle | 110 degrees |
| Installation Type | Ceiling mount |
| Bulb Type | Integrated LED |
| Luminous Flux | 4800 lm |
| Wattage | 40 Watts |
| Average Life | 30,000 Hours |
| Certifications | FCC, CE |
Warranty Information
HOFTRONIC products are manufactured to high-quality standards. This LED tube light is designed for durability with an average lifespan of 30,000 hours, equivalent to approximately 12 years of burning time under typical usage (6-7 hours/day).
All HOFTRONIC products are FCC and CE certified, ensuring compliance with safety and quality standards.
For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact HOFTRONIC customer support.
Customer Support
Should you have any questions, require technical assistance, or experience any issues with your HOFTRONIC LED Tube Light, please do not hesitate to contact our customer service team.
Contact information can typically be found on the HOFTRONIC official website or on your purchase receipt.