1. Product Overview
The HOFTRONIC LED Light Strips are designed to provide super bright and energy-efficient illumination for various indoor environments such as attics, basements, garages, and workshops. Equipped with the latest LED chips, these tubular lights offer significant energy savings compared to traditional fluorescent tubes.
This set includes four 60 cm LED light strips, each consuming only 20W while delivering 2400 lumens of neutral white light (4000K). The design ensures a 110-degree shadow-free illumination, making them ideal for spaces requiring consistent and high-quality lighting.
Image: A single HOFTRONIC LED light strip, showcasing its sleek, tubular design.
Image: Illustration highlighting the high performance and SMD LED chips, indicating available wattages and Kelvin temperatures, and a 110-degree beam angle.
2. Safety Instructions
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- This product is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is intended for indoor dry environments only. Do not install in damp or wet locations.
- Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
- Do not look directly into the LED light when it is on, as it may cause eye strain.
- Keep out of reach of children.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged:
- 4 x HOFTRONIC LED Light Strips (60 cm, 20W, 4000K)
- Mounting clamps (pre-installed or included for ceiling installation)
- Necessary screws and wall plugs for mounting
If any parts are missing or damaged, please contact HOFTRONIC customer support immediately.
4. Setup and Installation
The HOFTRONIC LED Light Strips are designed for super easy ceiling installation. The integrated LED tubes eliminate the need for separate tube handling.
Installation Steps:
- Preparation: Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Marking: Hold the LED light strip against the ceiling or desired mounting surface and mark the positions for the mounting clamps. Ensure the marks are level and spaced correctly for the light strip.
- Drilling: Drill holes at the marked positions. Insert the appropriate wall plugs if installing into drywall or masonry.
- Mounting Clamps: Secure the mounting clamps to the ceiling using the provided screws.
- Wiring: Connect the light strip's wiring to your electrical supply. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. If unsure, consult a qualified electrician.
- Attach Light Strip: Gently clip the LED light strip into the secured mounting clamps. Ensure it is firmly seated.
- Test: Restore power at the main circuit breaker and test the light strip.
Image: The ultra-thin profile of the LED light strip, measuring only 25mm in height, facilitating easy installation in dry indoor environments.
Image: Example of HOFTRONIC LED light strips installed in a garage workshop, providing bright and even illumination over a workbench.
5. Operating Instructions
The HOFTRONIC LED Light Strips operate directly from your standard electrical supply (230 Volts AC). Once properly installed and connected to a power switch, simply toggle the switch to turn the lights on or off.
These lights are designed for instant full brightness without flickering, providing immediate illumination for your space.
6. Maintenance
The HOFTRONIC LED Light Strips require minimal maintenance due to their durable design and long lifespan.
- Cleaning: To clean the light strips, ensure the power is off. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents, as these can damage the plastic housing.
- Inspection: Periodically inspect the light strips and wiring for any signs of damage or wear. If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.
7. Troubleshooting
If you encounter any issues with your HOFTRONIC LED Light Strips, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Ensure all wiring connections are secure. Test the switch. |
| Light is dim or flickers. | Incorrect voltage; damaged unit. | Verify the power supply voltage (230V). If the problem persists, the unit may be faulty and require replacement. |
| Unusual noise or smell. | Electrical fault. | Immediately disconnect power at the circuit breaker. Do not attempt to use the light. Contact a qualified electrician or HOFTRONIC support. |
If the issue cannot be resolved using these steps, please contact HOFTRONIC customer support.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | HOFTRONIC |
| Model Number | 5435843 |
| Dimensions (L x W x H) | 60 x 7.4 x 2.5 cm |
| Item Weight | 5 Kilograms (for the set of 4) |
| Number of Items | 4 |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Shape | Tubular |
| Bulb Type | LED |
| Luminous Flux | 2400 Lumens |
| Power Consumption | 20 Watts |
| Incandescent Equivalent | 20 Watts |
| Voltage | 230 Volts (AC) |
| Beam Angle | 110 Degrees |
| Shade Material | Plastic |
| Installation Type | Ceiling Mount |
| Special Features | Efficient LED (120 lm/W), Easy Installation, Up to 80% Energy Saving, Ultra-flat (2.5 cm) |
| IP Rating | IP20 (Indoor dry use only) |
| CRI (Color Rendering Index) | > 80 |
| Lifespan | 30,000 hours |
Image: Detailed product data sheet providing comprehensive technical specifications.
Image: EU Energy Efficiency Label for the product, indicating an 'E' rating and 20 kWh/1000h consumption. For more details, visit the EPREL database.
9. Warranty and Support
HOFTRONIC products are manufactured and tested with the utmost care and attention to quality. These LED light strips come with a 5-year all-in warranty, reflecting their long lifespan of 30,000 burning hours.
Image: Graphic highlighting the 5-year extended warranty and 30,000 hours lifespan of the LED light strips.
For any questions, technical assistance, or warranty claims, please contact HOFTRONIC customer service. Please have your model number (5435843) and proof of purchase ready when contacting support.
