MYshade Blackout Cordless Cellular Shades Instruction Manual

Introduction

Thank you for choosing MYshade Blackout Cordless Cellular Shades. These shades are designed to provide excellent room darkening, heat insulation, and UV protection, while also offering a child and pet-safe cordless operation. The unique honeycomb structure helps in noise reduction and maintaining room temperature. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your shades.

Package Contents

Before beginning installation, please verify that all components are present:

• Cordless Cellular Shade (1 unit)
• Installation Instructions (this manual)
• Installation Kits (includes brackets, screws, and anchors)
• No Pull Handle (for operating the shade)

Setup and Installation

Installation of your MYshade cellular shades is designed to be straightforward and can be completed in minutes. All necessary accessories are included. Please follow these steps carefully:

1. Prepare for Installation

Ensure you have the correct tools: a drill, screwdriver, measuring tape, and pencil. Determine whether you will be performing an inside mount (within the window frame) or an outside mount (outside the window frame).

2. Mount the Brackets

Mark the positions for your mounting brackets. For inside mounts, ensure the brackets are level and spaced appropriately to support the shade's width. For outside mounts, position them above the window frame. Secure the brackets using the provided screws and anchors.

3. Install the Shade

Align the headrail of the cellular shade with the installed brackets. Push the shade firmly upwards until it clicks securely into place. Ensure both ends of the headrail are properly seated in the brackets.

4. Attach the Pull Handle

Locate the clear plastic pull handle. Attach it to the bottom rail of the shade. This handle provides a comfortable grip for raising and lowering the shade.

Installation Video Guide

For a visual guide on the installation process, please watch the official product video below:

Operating Instructions

Your MYshade cellular shade features a cordless design for easy and safe operation. To control the light in your room, simply lift up or pull down the shade from the bottom rail using the attached handle. The shade will stay at any position you stop it.

• To Lower the Shade: Gently pull down on the bottom rail or the pull handle.
• To Raise the Shade: Gently push up on the bottom rail or the pull handle.
• The internal spring-loaded mechanism will hold the shade securely in place at your desired height.

Maintenance

Proper care will ensure the longevity and appearance of your cellular shades. The environmentally friendly non-woven fabrics are designed to resist peeling, cracking, and color changing even after years of sun exposure.

• Dusting: Regularly dust the shades using a soft cloth or a feather duster.
• Spot Cleaning: For minor spots, use a damp cloth with mild soap and water. Gently blot the affected area. Avoid harsh chemicals or excessive scrubbing.
• Vacuuming: A hand vacuum cleaner with a soft brush attachment can be used for deeper cleaning to remove accumulated dust from the honeycomb cells.

Troubleshooting

If you encounter any issues with your MYshade cellular shades, please refer to the following common solutions:

Specifications

Warranty and Support

For specific warranty details and support inquiries, please refer to the documentation included with your purchase or visit the official MYshade website. You can also visit the MYshade Store on Amazon for more information and contact options.