Introduction
This manual provides important information regarding the operation, maintenance, and safety of your PELONIS 42'' Oscillating Tower Fan. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this fan.
- Always unplug the fan before cleaning or servicing.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
- Do not use this fan in wet or moist locations, such as bathrooms.
- This fan is intended for indoor use only.
Package Contents
Carefully unpack your tower fan and check that all items are included:
- PELONIS 42'' Oscillating Tower Fan
- Remote Control (with batteries)
- Power Cord (integrated)
- User Manual (this document)
Setup
The PELONIS 42'' Oscillating Tower Fan typically requires minimal assembly. Follow these steps to prepare your fan for use:
- Unpack the Fan: Carefully remove the fan and all components from the packaging.
- Base Assembly (if required): If the base is separate, align the fan body with the base and secure it according to the instructions provided in the quick start guide (usually by twisting or using screws).
- Position the Fan: Place the fan on a firm, level surface. Ensure there is adequate space around the fan for optimal airflow and oscillation.
- Connect Power: Plug the power cord into a standard 110V AC electrical outlet.
Image: The PELONIS 42-inch oscillating tower fan, shown with its remote control, ready for use.
Product Features
Your PELONIS tower fan is equipped with several features designed for enhanced comfort and convenience:
- Powerful and Quiet Airflow: Features a dual blade structure and DC motor for strong, stable, and quiet air delivery.
- 5 Speed Settings: Offers five distinct fan speeds to customize airflow intensity.
- 3 Wind Modes: Choose between Normal, Natural, and Sleep modes for varied airflow patterns.
- Intelligent Auto-ECO Temperature Control: Automatically adjusts fan speed based on room temperature to optimize comfort and energy efficiency.
- Aromatherapy Diffuser: A built-in tray allows for the addition of essential oils to disperse pleasant scents.
- Wide-Angle Oscillation: Provides 90° oscillation to distribute air evenly across a wider area.
- Remote Control: Full-function remote control for convenient operation from a distance.
- Programmable Timer: Set the fan to operate for up to 9 hours.
- Convenient Carry Handle: Integrated handle for easy portability.
Image: Illustration of the Auto-ECO Mode, showing how the fan adjusts based on temperature increase or decrease.
Image: A person meditating in a room with the tower fan, highlighting the innovative aromatherapy feature. A close-up inset shows the aromatherapy tray.
Image: Visual representation of the three wind modes (Normal, Natural, Sleep) and five speed settings (Low to High) available on the fan.
Image: A person sleeping peacefully, illustrating the fan's quiet operation, specifically highlighting a 38dB noise level in sleep mode compared to other common sounds.
Operating Instructions
Your tower fan can be operated using the control panel on top of the unit or the included remote control.
Control Panel Overview
Image: A close-up diagram of the fan's top control panel, labeling the Oscillation Button, 5 Speed Settings, Mode Adjustment Button, Timer Button, and On/Off Button.
Remote Control
The remote control provides access to all fan functions. Ensure batteries are correctly installed (AAA batteries are typically included).
Image: A hand holding the remote control, pointing towards the tower fan in a living room setting, demonstrating convenient remote operation.
Functions:
- Power On/Off: Press the On/Off Button to turn the fan on or off.
- Speed Adjustment: Press the Speed Settings Button to cycle through the 5 available fan speeds.
- Mode Selection: Press the Mode Adjustment Button to switch between Normal, Natural, and Sleep modes.
- Oscillation: Press the Oscillation Button to start or stop the 90° oscillation function.
- Timer: Press the Timer Button to set the fan to automatically turn off after a set period (up to 9 hours).
- Auto-ECO Mode: This mode automatically adjusts fan speed based on ambient room temperature. Activate this mode via the control panel or remote.
- Aromatherapy: Locate the aromatherapy tray (refer to product diagram if needed), add a few drops of your preferred essential oil to the pad, and reinsert the tray.
Maintenance
Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your fan.
- Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. For dust accumulation in the air intake/outlet, use a vacuum cleaner with a brush attachment.
- Aromatherapy Tray: Clean the aromatherapy tray and pad periodically to prevent residue buildup. Remove the pad, wash with mild soap and water, rinse thoroughly, and allow to dry completely before reinserting.
- Storage: If storing the fan for an extended period, cover it to protect from dust and store in a cool, dry place.
- Care Instructions: Do Not Wash the entire unit.
Troubleshooting
If you experience issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Power cord not securely plugged in. | Ensure the fan is plugged into a working electrical outlet. Check the power cord connection. |
| Weak airflow. | Fan speed is too low. Air intake/outlet blocked by dust. | Increase the fan speed setting. Clean the air intake and outlet grilles. |
| Fan is noisy. | Fan is on a non-level surface. Foreign object inside. | Place the fan on a flat, stable surface. Unplug and inspect for any obstructions. |
| Remote control not working. | Batteries are dead or incorrectly installed. Obstruction between remote and fan. | Replace batteries with new AAA batteries, ensuring correct polarity. Ensure direct line of sight to the fan's receiver. |
| No scent from aromatherapy. | Aromatherapy pad is dry or needs more oil. Pad is dirty. | Add more essential oil to the pad. Clean or replace the aromatherapy pad. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Specification | Detail |
|---|---|
| Model Name | PFT42A5BGB |
| Brand | PELONIS |
| Product Dimensions | 12.2"D x 12.2"W x 42"H |
| Power Source | Corded Electric |
| Voltage | 110 Volts |
| Wattage | 45 watts |
| Number of Speed Settings | 5 |
| Number of Wind Modes | 3 (Normal, Natural, Sleep) |
| Oscillation Angle | 90° |
| Timer | Up to 9 hours |
| Control Method | Remote, On-unit controls |
| Special Features | Dual Blade, Auto-Eco Temperature Control, Wide-Angle Oscillation, Aromatherapy Diffuser |
| Indoor/Outdoor Usage | Indoor |
| Cable Length | 6 Feet |
| Certification | ETL |
Warranty and Support
PELONIS products are manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase. For specific warranty terms and conditions, please refer to the official PELONIS website or the warranty card included with your product.
For technical support, troubleshooting assistance, or to inquire about warranty service, please contact PELONIS Customer Service:
- Online Resources: You can find additional support documents, FAQs, and contact information on the official PELONIS website.
- User Manual (PDF): Download PDF
- User Guide (PDF): Download PDF
Please have your model number (PFT42A5BGB) and proof of purchase ready when contacting support.
