Other P951 Bluetooth Headphones User Manual

Introduction

Thank you for choosing the Other P951 Bluetooth Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Safety Information

To prevent damage to your headphones or injury to yourself, please observe the following safety precautions:

• Do not expose the headphones to extreme temperatures, humidity, or liquids.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not attempt to disassemble or modify the headphones. This will void the warranty.
• Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
• Keep out of reach of children.
• Dispose of the product and battery responsibly according to local regulations.

Setup

1. Charging the Headphones

Before first use, fully charge your P951 headphones. A full charge typically takes approximately 2-3 hours.

1. Locate the charging port on the headphone (usually a Micro USB or USB-C port).
2. Connect the provided USB charging cable to the headphone's charging port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, wall adapter).
4. The LED indicator light will typically glow red during charging and turn off or change to blue/green when fully charged.

Image: Side view of the P951 headphones, highlighting the charging port and control buttons for reference.

2. Bluetooth Pairing

To connect your P951 headphones wirelessly to a device:

1. Ensure the headphones are charged and turned off.
2. Press and hold the Power button (often also the Multi-function button) for approximately 5-7 seconds until the LED indicator light flashes red and blue alternately. This indicates pairing mode.
3. On your mobile phone or other Bluetooth-enabled device, go to the Bluetooth settings.
4. Search for available devices. You should see "P951" or a similar name in the list.
5. Select "P951" to connect. Once connected, the LED indicator will usually flash blue slowly or turn solid blue.
6. If prompted for a password, enter "0000".

3. Wired Connection (3.5mm Audio Cable)

You can also use the P951 headphones with a wired connection:

1. Connect one end of a 3.5mm audio cable (not always included, check package contents) to the audio input jack on the headphones.
2. Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., phone, laptop, MP3 player).
3. When connected via cable, the Bluetooth function is typically disabled, and the headphones operate passively.

Operating Instructions

1. Power On/Off

• Power On: Press and hold the Power button for approximately 3 seconds until the LED indicator lights up.
• Power Off: Press and hold the Power button for approximately 3-5 seconds until the LED indicator turns off.

2. Music Playback Controls

The P951 headphones feature touch controls and physical buttons for music management:

• Play/Pause: Short press the Multi-function button (often the Power button).
• Volume Up: Short press the Volume Up (+) button.
• Volume Down: Short press the Volume Down (-) button.
• Next Track: Long press the Volume Up (+) button.
• Previous Track: Long press the Volume Down (-) button.

3. Call Management

With the built-in microphone, you can manage calls directly from your headphones:

• Answer Call: Short press the Multi-function button when a call comes in.
• End Call: Short press the Multi-function button during a call.
• Reject Call: Long press the Multi-function button when a call comes in.
• Redial Last Number: Double-press the Multi-function button.

4. Active Noise Cancellation (ANC)

The P951 headphones feature Active Noise Cancellation to reduce ambient noise.

• Activate/Deactivate ANC: Look for a dedicated ANC button or a specific combination press on the control panel. (Note: Specific button location may vary. Refer to product diagrams if available.)
• When ANC is active, a separate LED indicator may light up, or you may hear an audio prompt.

Image: The P951 Bluetooth Headphones, showcasing their over-ear design and general appearance.

Maintenance

1. Cleaning

• Wipe the headphones with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Clean ear cushions gently with a slightly damp cloth if necessary, and allow them to air dry completely before use.

2. Storage

• Store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
• If the headphones are foldable (as indicated by images), fold them carefully to save space and protect them during travel.
• Avoid placing heavy objects on top of the headphones.

Image: The P951 headphones in a folded position, demonstrating their portability and ease of storage.

3. Battery Care

• To prolong battery life, avoid fully discharging the headphones frequently.
• If storing for an extended period, charge the headphones to about 50% every few months.

Troubleshooting

Specifications

Warranty Information

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your purchase receipt as proof of purchase for any warranty claims.

The warranty typically covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Customer Support

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact your retailer or the manufacturer's customer support. Details for customer support can usually be found on the product packaging or the manufacturer's official website.

When contacting support, please have your product model (P951) and proof of purchase ready.