1. Introduction
This manual provides essential instructions for the safe operation and maintenance of your Contixo F16N Camera Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage. The Contixo F16N is designed for beginners and young enthusiasts, featuring a 1080P dual camera, easy-to-fly controls, and intelligent flight capabilities.
Image 1.1: Contixo F16N Camera Drone, remote control, and carrying case.
2. What's in the Box
Verify that all components are present in the package before proceeding with setup.
- 1 x Contixo F16N Drone
- 1 x Remote Control
- 1 x Battery
- 4 x Propeller Guards
- 4 x Replacement Blades (Propellers)
- 1 x USB Charging Cable
- 1 x Screwdriver
- 1 x Carrying Case
- 1 x User Manual (this document)
Image 2.1: All included components of the Contixo F16N drone package.
3. Setup Guide
3.1. Charging the Drone Battery
- Remove the drone battery from its compartment.
- Connect the battery to the USB charging cable.
- Plug the USB cable into a standard USB power adapter (not included) or a computer USB port.
- The indicator light on the charging cable will show the charging status (e.g., red for charging, green for fully charged).
- Charging typically takes approximately 60-90 minutes. Do not overcharge the battery.
Image 3.1: The intelligent flight battery, capable of up to 16 minutes flight time.
3.2. Installing Propeller Guards
For beginner pilots, it is highly recommended to install the propeller guards to protect the propellers from damage during collisions.
- Identify the four propeller guards.
- Carefully attach each guard to the corresponding motor arm of the drone. Ensure they are securely fastened.
3.3. Preparing the Remote Control
- Open the battery compartment on the back of the remote control.
- Insert 3 x AAA batteries (not included), ensuring correct polarity.
- Close the battery compartment.
- Extend the phone holder if you plan to use a smartphone for FPV (First Person View).
Image 3.2: The remote control for the Contixo F16N drone, showing FPV real-time transmission capability with a smartphone.
3.4. Drone Unfolding
The Contixo F16N features a compact, foldable design for portability.
- Gently unfold the front arms of the drone until they lock into place.
- Then, unfold the rear arms until they also lock into place.
- Ensure all arms are fully extended and locked before flight.
Image 3.3: The compact, foldable design of the Contixo F16N drone, showing its dimensions when folded and unfolded.
4. Operating Instructions
4.1. Pre-Flight Checklist
- Ensure drone battery is fully charged and securely installed.
- Ensure remote control batteries are installed.
- Check that propellers are correctly installed and undamaged.
- Verify propeller guards are securely attached (recommended for beginners).
- Choose an open, clear area for flight, away from obstacles, people, and animals.
- Check local regulations for drone operation.
4.2. Pairing the Drone and Remote Control
- Place the drone on a flat, level surface.
- Turn on the drone by pressing and holding the power button. The drone lights will flash.
- Turn on the remote control.
- Push the left joystick up and then pull it down. The drone lights will stop flashing and become solid, indicating successful pairing.
4.3. Basic Flight Controls
The Contixo F16N is designed for ease of use with several intelligent flight features.
- One-Key Takeoff/Landing: Press the dedicated button to automatically take off or land the drone.
- Altitude Hold: The drone maintains a stable altitude, simplifying flight control.
- Headless Mode: In this mode, the drone's orientation is relative to the pilot, making it easier to control without worrying about the drone's front direction.
- 360° Flips: Engage this feature to perform aerial stunts.
Image 4.1: The One-Key Take-Off and Landing feature simplifies drone operation.
Image 4.2: The Altitude Hold function allows the drone to hover steadily for easier control and photography.
Image 4.3: The 360-degree flip feature adds dynamic maneuvers to your flight experience.
4.4. Camera Operation and FPV
The F16N is equipped with a 1080P dual camera for capturing aerial photos and videos.
- Download the Contixo F16N app (refer to the quick start guide for QR code or app store links).
- Connect your smartphone to the drone's Wi-Fi network (usually named "Contixo-F16N-XXXX").
- Open the app to view the live FPV feed and control camera functions.
- Use the app interface to take photos or start/stop video recording.
Image 4.4: The 1080P HD WiFi camera captures aerial images and videos.
4.5. Special Flight Modes
- Follow Me Mode: When activated via the app, the drone will automatically follow the pilot, capturing dynamic footage.
Image 4.5: The Follow Me mode allows the drone to track a moving subject.
5. Maintenance
5.1. Cleaning
- Always power off the drone and remote control before cleaning.
- Use a soft, dry cloth to wipe the drone's body.
- For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters electronic components.
- Clean propellers gently to remove dust or debris.
5.2. Propeller Replacement
Damaged propellers can affect flight stability and safety. Replace them immediately if they are bent, cracked, or chipped.
- Identify the damaged propeller.
- Use the provided screwdriver to carefully remove the screw holding the propeller in place.
- Remove the damaged propeller.
- Install a new propeller, ensuring it matches the original (some drones have different types for clockwise/counter-clockwise rotation, check markings if present).
- Secure the new propeller with the screw. Do not overtighten.
5.3. Battery Care and Storage
- Store batteries in a cool, dry place, away from direct sunlight and heat.
- Do not fully discharge batteries before storing for extended periods; charge them to about 50-60%.
- Avoid physical damage to batteries.
- If a battery swells or shows signs of damage, discontinue use and dispose of it properly.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drone does not power on. | Battery is not charged or not installed correctly. | Charge the drone battery fully. Ensure it is inserted correctly and securely. |
| Remote control does not power on. | Remote control batteries are dead or installed incorrectly. | Replace remote control batteries. Check polarity. |
| Drone and remote control fail to pair. | Incorrect pairing procedure or interference. | Ensure drone and remote are close. Repeat pairing steps (power on drone, then remote, left joystick up-down). Avoid strong Wi-Fi interference. |
| Drone is unstable during flight. | Damaged propellers, uncalibrated gyroscope, or strong winds. | Check and replace damaged propellers. Perform gyroscope calibration (refer to quick start guide for specific steps). Fly in calm conditions. |
| Camera feed is not showing on smartphone. | Not connected to drone's Wi-Fi, app not open, or app permissions. | Ensure smartphone is connected to the drone's Wi-Fi. Open the Contixo F16N app. Check app permissions for camera and network access. |
| Short flight time. | Battery not fully charged or battery degradation. | Ensure battery is fully charged before each flight. If battery life significantly decreases, consider replacing the battery. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Contixo |
| Model Name | F16N |
| Video Capture Resolution | 1080p |
| Connectivity Technology | Wi-Fi |
| Skill Level | Beginner |
| Item Weight | 100 Grams (3.53 ounces) |
| Battery Capacity | 1800 Milliamp Hours |
| Flight Time | Up to 17 minutes (Intelligent Flight Time) |
| Special Features | 360 Degree Flip, Altitude Hold, Headless Mode, One-Key Takeoff/Landing, Follow Me, FPV, Portable |
| Control Type | Remote Control, Gesture Control (via app) |
| Material | Plastic |
| Battery Cell Composition | Lithium Ion |
| Package Dimensions | 8.31 x 7.01 x 3.03 inches |
8. Warranty and Support
8.1. Warranty Information
Contixo products typically come with a limited manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official Contixo website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.
8.2. Customer Support
For technical assistance, troubleshooting, or inquiries regarding your Contixo F16N drone, please contact Contixo customer support.
- Website: www.contixo.com
- Email: Refer to the official website for contact email.
- Phone: Refer to the official website for contact phone number.
When contacting support, please have your product model (F16N) and purchase information ready.
