1. Introduction
The ELS PET Travel Bowl is designed to provide a mess-free and controlled drinking experience for your beloved pets, whether at home or on the go. Its innovative floating disk design helps prevent spills and encourages slower drinking, promoting better hydration and reducing wet mouth issues. This manual provides essential information for the proper setup, operation, and maintenance of your ELS PET Travel Bowl.

Image: The ELS PET Travel Bowl in grey, showcasing its compact and spill-proof design.
2. Key Features
- Slow Water Feeder: The floating disk design controls the water release, slowing down your pet's drinking speed to prevent choking and promote healthier hydration.
- Prevent Wet Mouth: The floating disk minimizes the amount of water exposed, preventing large areas of water from wetting your pet's mouth hairs and keeping them dry.
- Splash-proof Design: Featuring a double spill-proof design with a splash-proof rim and float plate, this bowl effectively prevents water from spilling, keeping your floors dry and tidy.
- Anti-Slip Base: Equipped with 4 anti-slip rubber pads on the bottom, the bowl remains steady and prevents sliding during use, even with enthusiastic drinkers.
- Travel Friendly: The secure design of the edge strip, floating disk, and anti-slip base makes this bowl perfect for use in cars, SUVs, and trucks, preventing spills during travel.
- Large Capacity: With a 1L (35 fl oz) capacity, the bowl holds enough water to meet your pet's daily drinking needs, reducing the frequency of refills.

Image: A dog drinking from the ELS PET bowl, demonstrating how the floating disk allows for controlled water access to slow down drinking.

Image: A beagle drinking from the ELS PET bowl, highlighting the mess-free and no-spill functionality on a wooden floor.

Image: A small dog sitting in a car next to the ELS PET travel bowl, illustrating its suitability for vehicle use without spills.

Image: Diagram showing the dimensions of the ELS PET Travel Bowl (8.9 x 7.3 x 3.1 inches) and its 35 oz / 1L capacity.
3. Setup
- Unpack: Carefully remove all components from the packaging.
- Initial Cleaning: Before first use, disassemble the bowl by removing the edge strip and floating disk. Wash all parts thoroughly with water or place them on the upper rack of a dishwasher.
- Assemble: Once clean and dry, reassemble the bowl by placing the floating disk back into the main bowl, followed by securing the edge strip. Ensure all parts are properly seated.

Image: Exploded view of the ELS PET bowl components (edge strip, floating disk, and main bowl) being cleaned, illustrating its easy disassembly.
4. Operating Instructions
- Fill with Water: Pour fresh water into the bowl. The floating disk will rise with the water level, leaving a small opening for your pet to drink from.
- Pet Drinking: When your pet approaches to drink, their tongue or nose will gently push down on the floating disk, allowing a controlled amount of water to surface. This mechanism ensures a slower drinking pace and minimizes splashing.
- Placement: Place the bowl on a flat, stable surface. The anti-slip pads on the bottom will help keep it in place.
5. Maintenance and Cleaning
Regular cleaning is essential to maintain hygiene and prolong the life of your ELS PET Travel Bowl. It is recommended to clean the bowl daily or as needed.
- Disassemble: Remove the floating disk and the edge strip from the main bowl.
- Wash: Rinse all components with clean water. For a more thorough cleaning, use mild soap and water, or place the components on the upper rack of your dishwasher.
- Dry: Ensure all parts are completely dry before reassembling to prevent water spots or residue buildup.
- Reassemble: Place the floating disk back into the main bowl, then secure the edge strip.
Note: The manufacturer recommends hand washing for optimal care, though the upper rack of a dishwasher is also suitable.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water not surfacing or low flow. | Floating disk is stuck or dirty; insufficient water in the bowl. | Ensure the bowl is filled to an appropriate level. Disassemble and thoroughly clean the floating disk and all components to remove any debris or buildup. |
| Minor water drips around the bowl. | Normal pet drinking behavior; pet may be playing with the water. | While designed to minimize spills, some minor drips from your pet's mouth are natural. Consider placing the bowl on a pet-friendly mat for extra floor protection. Ensure the edge strip is securely in place. |
| Bowl slides on the floor. | Anti-slip pads are dirty or worn; surface is too slick. | Clean the anti-slip pads on the bottom of the bowl. Ensure the floor surface is dry and clean. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | ELS PET |
| Model Number | Dog water bowl |
| Capacity | 1L / 35 fl oz |
| Color | Grey |
| Material | Polyester |
| Item Dimensions (LxWxH) | 8.9 x 7.3 x 3.1 inches |
| Item Weight | 1.28 pounds |
| Target Audience | Cats, Dogs |
| Care Instructions | Hand Wash Only (Dishwasher upper rack suitable) |
| Style | Spill Proof |
| Breed Recommendation | All Breed Sizes |
| Date First Available | April 6, 2021 |
8. Warranty and Support
ELS PET stands behind the quality of its products. For specific warranty details, product registration, or technical support, please refer to the warranty card included with your purchase or visit the official ELS PET website. You may also contact the retailer from whom you purchased the product for assistance.
For further inquiries, please visit the ELS PET Store on Amazon.