Brandson Silent ECO Green Tower Fan

1. Introduction

Thank you for choosing the Brandson Silent ECO Green Tower Fan. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new fan. Please read this manual thoroughly before use and keep it for future reference.

Image: The Brandson Silent ECO Green Tower Fan in white, accompanied by its remote control.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:

• Read all instructions before using this fan.
• Ensure the power supply matches the voltage specified on the fan's rating label (220-240V ~ 50Hz).
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• Always unplug the fan when not in use, when moving it from one location to another, and before cleaning.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
• Do not block air openings or operate with any opening blocked. Keep openings free of lint, hair, and the like.
• This fan is intended for household use only and not for commercial or industrial use.
• Do not use outdoors.
• Do not use in wet or damp locations such as bathrooms.
• Keep the fan away from heat sources, direct sunlight, and flammable materials.
• Ensure the fan is placed on a stable, level surface to prevent it from tipping over.

3. Package Contents

Please check the package contents upon unpacking:

• Brandson Silent ECO Green Tower Fan
• Remote Control (2 x AAA batteries included)
• Power Cable
• Instruction Manual

4. Product Overview

The Brandson Silent ECO Green Tower Fan features a sleek design and intuitive controls for optimal air circulation. It is equipped with a DC brushless motor for quiet and energy-efficient operation.

4.1. Fan Components

Image: Overview of the tower fan, highlighting its dimensions (86.5 cm height, 24.5 cm base diameter) and 65° oscillation range.

4.2. Control Panel and Remote Control

The fan can be operated via the touch-sensitive control panel on top of the unit or using the included infrared remote control.

Image: Detailed view of the fan's LED display and control buttons, along with the remote control showing its functions (ON/OFF, Speed, OSC, Timer, Mode).

• ON/OFF Button: Powers the fan on or off.
• Speed Button: Adjusts between 9 speed levels.
• OSC (Oscillation) Button: Activates or deactivates the 65° horizontal oscillation.
• Timer Button: Sets the auto-off timer from 0 to 9 hours.
• Mode Button: Cycles through Normal, Natural, and Sleep modes.
• Buzzer: The fan has an audible buzzer for button presses, which can be switched off (refer to operating instructions).

5. Setup

The Brandson Tower Fan requires minimal setup. Follow these steps to prepare your fan for use:

1. Unpack: Carefully remove the fan and all accessories from the packaging. Retain packaging for future storage or transport.
2. Placement: Place the fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and oscillation. The fan is suitable for various rooms including bedrooms, living rooms, and offices.
3. Power Connection: Insert the power plug into a suitable 220-240V ~ 50Hz electrical outlet.

Image: Examples of optimal fan placement in a bedroom, living room, and office environment.

6. Operating Instructions

6.1. Power On/Off

• Press the ON/OFF button on the control panel or remote control to turn the fan on or off.

6.2. Adjusting Fan Speed

• With the fan on, press the Speed button repeatedly to cycle through the 9 available speed levels. The current speed level will be displayed on the LED screen.

6.3. Oscillation Function

• Press the OSC button to activate the 65° horizontal oscillation. The fan will swing from side to side, distributing air across a wider area.
• Press the OSC button again to stop the oscillation at the current position.

6.4. Setting the Timer

• Press the Timer button repeatedly to set the desired auto-off time, from 0 to 9 hours, in 1-hour increments. The selected time will be shown on the display.
• The fan will automatically turn off once the set time has elapsed.

6.5. Buzzer On/Off

• To turn the buzzer sound on or off, press and hold the Mode button for approximately 3 seconds.

7. Modes and Functions

The fan offers three distinct operating modes to suit your preferences:

• Press the Mode button to cycle through the following modes:

7.1. Normal Mode

• In Normal mode, the fan operates at a constant speed, as selected by the user. This provides a steady airflow.

7.2. Natural Mode

• Natural mode simulates a natural breeze by varying the fan speed in different sequences (between OFF, Low, Medium, and High). The intensity depends on the previously selected speed level.

7.3. Sleep Mode

• Sleep mode also simulates a breeze but with decreasing intensity over time, eventually settling at a low speed. This mode is designed for comfortable use during sleep, providing quiet operation (as low as 37.6 dB(A) at level 1).

8. Maintenance and Cleaning

Regular cleaning helps maintain the fan's performance and extends its lifespan.

• Always unplug the fan from the power outlet before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents, as they may damage the surface.
• For dust accumulation on the air intake or outlet grilles, use a vacuum cleaner with a brush attachment to gently remove dust.
• Do not immerse the fan in water or allow water to drip into the motor housing.
• Store the fan in a cool, dry place when not in use, preferably in its original packaging.

9. Troubleshooting

If you experience issues with your Brandson Tower Fan, refer to the following common problems and solutions:

10. Specifications

11. Warranty and Support

Brandson products are designed for reliability and performance. For information regarding warranty, technical support, or service, please visit the official Brandson website or contact your retailer.

You can find more information about Brandson products and support at the Brandson Store on Amazon.