Lemax Winterhaus Resort Christmas Figurine

Introduction

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Lemax Winterhaus Resort Christmas Figurine, Model 15735. This polyresin collectible is designed to enhance your holiday village display with its detailed craftsmanship and illuminated features.

Safety Information

• Keep the figurine away from water and moisture to prevent electrical hazards.
• Place the figurine on a stable, flat surface to prevent accidental falls.
• Do not expose the figurine to direct sunlight or extreme temperatures, as this may cause fading or damage to the material.
• This product is for indoor use only.
• Keep out of reach of small children and pets due to small parts.

Package Contents

• Lemax Winterhaus Resort Christmas Figurine (Model 15735)
• Power Adapter (if included with your specific model)

Setup

Unpacking and Placement

1. Carefully remove the figurine from its packaging, retaining all packing materials for future storage.
2. Inspect the figurine for any signs of damage. If damage is found, contact customer support.
3. Choose a suitable indoor location for your Winterhaus Resort figurine. Ensure the surface is level and stable.
4. Position the figurine to best showcase its intricate details and animated features.

Power Connection

1. Locate the power input port on the back or base of the figurine.
2. Connect the provided power adapter to the figurine and then plug the adapter into a standard electrical outlet.

Operating Instructions

Powering On/Off

1. Once the power adapter is connected and plugged in, locate the ON/OFF switch, typically found on the side or back of the figurine.
2. Flip the switch to the 'ON' position to activate the lights and animated features (e.g., rotating skiers, ski lift movement).
3. To turn off the figurine, flip the switch to the 'OFF' position.

Maintenance

Cleaning

1. Ensure the figurine is unplugged before cleaning.
2. Wipe the surface of the figurine with a soft, dry cloth.
3. For stubborn dust or grime, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals.

Storage

1. When not in use, store the figurine in its original packaging or a protective container to prevent dust accumulation and damage.
2. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Official Product Videos

Warranty and Support

For information regarding warranty coverage, product support, or to explore other Lemax products, please visit the official Lemax store or contact their customer service directly.

Official Lemax Store: Visit the Lemax Store