3-Light Brushed Nickel Ceiling Fan Shades LED Light Kit LK1905 User Manual

Product Overview

This Elite 3-light ceiling fan light kit is an ideal choice for replacing worn or outdated fan lights. With the included long-lasting LED light bulbs, the light kit produces bright illumination. It eliminates the need to change bulbs in hard-to-reach ceiling fans. Featuring white frosted glass shades and elegant brushed nickel finish, this light kit goes well with a variety of indoor ceiling fan styles.

Safety Information

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other injuries that could be hazardous or fatal.

• Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the light kit.
• Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
• If you are unsure about wiring or installation, consult a qualified electrician.
• Do not use this light kit with a dimmer switch unless specified as compatible.
• Handle glass shades with care to prevent breakage.

Package Contents

Verify that all components listed below are included in your package:

• 1 x 3-Light Ceiling Fan Light Kit (Brushed Nickel finish with Frosted Glass shades)
• 3 x 5-Watt A15 LED Light Bulbs

Image: The 3-Light Brushed Nickel Ceiling Fan Light Kit, showing the brushed nickel base and three frosted glass shades. A pull chain is visible.

Setup and Installation

This light kit is compatible with most standard 42 in. to 52 in. indoor ceiling fans with a center hole in the housing cap.

1. Prepare the Ceiling Fan: Ensure the power to the ceiling fan is turned off at the circuit breaker. Remove any existing light kit or cap from the fan's housing.
2. Connect Wiring: Carefully connect the wires from the new light kit to the corresponding wires in the ceiling fan's housing. Typically, this involves connecting the black wire from the light kit to the black wire from the fan, and the white wire from the light kit to the white wire from the fan. Secure connections with wire nuts.
3. Mount the Light Kit: Align the light kit with the mounting holes on the ceiling fan's housing. Secure the light kit using the screws provided with your ceiling fan or the light kit, ensuring it is firmly attached.
4. Install Light Bulbs: Screw the three included 5-Watt A15 LED light bulbs into the sockets. Do not overtighten.
5. Attach Glass Shades: Carefully attach the frosted glass shades to the light kit. Ensure they are securely fastened according to the light kit's design (e.g., by twisting or using retaining rings).
6. Restore Power: Once installation is complete and all components are secure, restore power at the main circuit breaker.

Operating Instructions

The Intertek LK1905 light kit is designed for simple operation, primarily controlled by a pull chain.

• Turning On/Off: Locate the pull chain extending from the light kit. A single pull will turn the lights on or off.
• Light Control: This light kit provides a single level of illumination. Repeatedly pulling the chain will toggle the lights between on and off states.

Maintenance

Regular maintenance will help ensure the longevity and appearance of your light kit.

• Cleaning: To clean the brushed nickel finish, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. For the frosted glass shades, remove them carefully and wash with mild soap and water, then dry thoroughly before reattaching.
• Bulb Replacement: The included LED bulbs are energy-efficient and long-lasting. If replacement is ever needed, ensure the power is off before unscrewing old bulbs and installing new ones. Use A15 LED bulbs with a maximum wattage of 5 watts per socket.

Troubleshooting

If you encounter issues with your light kit, refer to the following common problems and solutions:

Specifications

Lighting Facts (Per Bulb)

Image: A label detailing the "Lighting Facts" for each included LED bulb. It specifies a brightness of 450 lumens, an estimated yearly energy cost of $0.60 (based on 3 hrs/day, 11¢/kWh), a life of 13.6 years (based on 3 hrs/day), a warm light appearance at 2700K, and energy used of 5 watts.

• Brightness: 450 lumens
• Estimated Yearly Energy Cost: $0.60 (Based on 3 hrs/day, 11¢/kWh)
• Life: 13.6 years (Based on 3 hrs/day)
• Light Appearance: Warm (2700K)
• Energy Used: 5 watts

Warranty and Support

For warranty information or technical support, please contact Intertek customer service. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, most lighting products come with a limited manufacturer's warranty covering defects in materials and workmanship. Please refer to the product packaging or the manufacturer's official website for the most current warranty terms and conditions.