1. Product Overview
This manual provides essential information for the safe and effective use of your TAMCO 24V Ride-On Car Charger, Model Lkc-288050-e. Designed for various 24-volt battery-powered ride-on toys, this charger ensures your child's electric vehicle is always ready for adventure.

Image 1.1: Front view of the TAMCO 24V Ride-On Car Charger. This image displays the charger's main body with its specifications label, including the model number Lkc-288050-e, input/output details, and the ETL safety certification mark. A green LED indicator is visible, and the barrel connector cable extends from the top.
Key features include:
- Model: Class 2 Power Unit Model Lkc-288050-e
- Output: 24V 500mA Charger
- Input: AC 100-240V 0.36A 50/60Hz
- Connector: 2.1 x 5.5mm Barrel Plug
- Compatibility: Works with a variety of 24V ride-on cars, motorcycles, and UTVs.
- LED Display: Red indicates charging, Green indicates fully charged.
- Safety: ETL certified for high efficiency and safe charging.
2. Setup
Before first use, please inspect the charger for any visible damage. Ensure the power outlet and the ride-on toy's charging port are clean and free of debris.
- Identify the Charging Port: Locate the charging port on your 24V ride-on toy. It should be compatible with a 2.1 x 5.5mm barrel connector.
- Connect the Charger: Insert the barrel connector of the TAMCO charger firmly into the ride-on toy's charging port.
- Plug into Power Outlet: Plug the charger's AC plug into a standard 100-240V wall outlet.
- Observe LED Indicator: The LED light on the charger will illuminate. A red light indicates that the battery is currently charging.

Image 2.1: Back view of the TAMCO 24V Ride-On Car Charger. This image shows the two-prong AC plug designed for standard wall outlets, along with a caution label regarding dry location use only.
3. Operating Instructions
The TAMCO 24V charger is designed for simple and safe operation. Always ensure proper connection and observe the LED indicator for charging status.
- Charging Status:
- A RED LED light indicates that the battery is actively charging.
- A GREEN LED light indicates that the battery is fully charged and charging has stopped.
- Charging Time: Charging time will vary depending on the battery's capacity and its current charge level. Refer to your ride-on toy's manual for specific battery charging times.
- Disconnecting: Once the LED turns green, indicating a full charge, first unplug the charger from the wall outlet, then disconnect the barrel connector from the ride-on toy.
This charger is compatible with various 24V ride-on toys, such as the examples shown below:

Image 3.1: Example of a 24V electric motorcycle. This image shows a young child riding a red electric motorcycle, illustrating one type of ride-on toy compatible with the charger.

Image 3.2: Example of a 24V electric UTV. This image features two young children seated in an electric utility terrain vehicle (UTV), demonstrating another compatible vehicle type.
4. Maintenance and Safety
Proper care and adherence to safety guidelines will prolong the life of your charger and ensure safe operation.
- Storage: Store the charger in a dry, cool place away from direct sunlight and moisture when not in use.
- Cleaning: Clean the charger with a dry, soft cloth. Do not use liquid cleaners or immerse the charger in water.
- Safety Precautions:
- This charger is for dry location use only. Do not expose to rain or moisture.
- Do not operate the charger if it has been damaged in any way (e.g., frayed cord, cracked casing).
- Keep out of reach of children. This is not a toy.
- Always unplug the charger from the wall outlet before disconnecting from the toy.
- Ensure the charger's specifications match the requirements of your ride-on toy's battery.
5. Troubleshooting
If you encounter issues with your charger, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger LED does not light up. | No power from outlet; loose connection; faulty charger. | Check wall outlet with another device. Ensure charger is fully plugged in. If still no light, charger may be faulty. |
| LED is red, but battery does not charge. | Loose connection to toy; faulty battery; incorrect voltage. | Ensure barrel connector is fully inserted into toy's charging port. Verify toy battery is 24V. Battery may need replacement. |
| LED is green, but toy does not power on. | Battery issue; toy issue. | The charger indicates a full charge. The issue is likely with the toy's battery or internal components. Consult the toy's manual or manufacturer. |
6. Specifications
Detailed technical specifications for the TAMCO 24V Ride-On Car Charger:
- Model: Class 2 Power Unit Model Lkc-288050-e
- Input: AC 100-240V, 0.36A, 50/60Hz
- Output: 24V DC, 500mA
- Connector Type: 2.1 x 5.5mm Barrel Plug
- Certification: ETL Certified (Conforms to UL STD.1310, Certified to CSA STD. C22.2 NO.223)
- Manufacturer: SHENGDAN
- ASIN: B091KRFZ6W
- UPC: 653871299334

Image 6.1: TAMCO 24V Ride-On Car Charger with packaging. This image shows the charger alongside its retail box, providing a visual reference for the product and its packaging.
7. Warranty and Support
For any inquiries or support regarding your TAMCO 24V Ride-On Car Charger, please refer to the following information:
- Returns and Exchanges: Please inspect your package for any damaged or missing items upon receipt and notify the seller within 3 days. For any reason, contact the seller within 30 days of receiving your order to resolve issues. Items must be returned unused and in the same condition received.
- Legal Disclaimer: It is not the quality issue that the buyer pays the freight for returns.
- Contact Support: For further assistance, please contact the seller or manufacturer directly through the platform where the product was purchased.