Keonjinn Bathroom Mirror with Lights 40 x 28 Inch User Manual

Product Overview

The Keonjinn Bathroom Mirror with Lights is designed to provide enhanced illumination and functionality for your bathroom space. It features integrated LED lighting, an anti-fog function, and stepless dimming capabilities, all housed within a sleek, modern design. The mirror is constructed with high-definition tempered glass for durability and safety.

Keonjinn Bathroom Mirror with Lights installed above a sink — Figure 1: Keonjinn Bathroom Mirror with Lights, 28"L x 40"W, showcasing its illuminated design above a bathroom vanity.

Safety Information

For safe installation and use of your Keonjinn Bathroom Mirror, please adhere to the following guidelines:

Have the product installed by a professional electrician to ensure proper wiring and safety.
Always turn off the main electricity supply at the circuit breaker before beginning any installation or maintenance work.
Wear safety glasses during installation to protect your eyes from potential debris.
A minimum of two people are recommended for installation due to the size and weight of the mirror.
Handle the mirror with care, as it contains glass components.
Ensure proper use of the waterproof features as designed.
This mirror is not intended to be the primary light source for the entire bathroom; additional lighting may be required.

Comparison of Keonjinn HD Tempered Glass mirror versus other mirrors, showing shatterproof quality — Figure 2: The mirror features 5mm HD tempered glass, designed to be shatterproof and explosion-proof, ensuring enhanced safety compared to standard mirrors.

Setup and Installation

This section provides instructions for mounting and connecting your mirror. Professional installation is recommended.

Choosing the Right Size and Location

Consider the dimensions of your vanity and the surrounding space when selecting the mirror's placement. The mirror can be mounted horizontally or vertically.

Diagram showing recommended mirror dimensions and spacing for installation above a vanity — Figure 3: Recommended spacing for mirror installation. For optimal aesthetics, the mirror should be slightly narrower or the same width as your vanity. Leave approximately 3 inches below the ceiling light and 1-3 inches above the faucet.

Mounting the Mirror

The mirror utilizes an upgraded French cleat mounting system for secure installation.

Step 1: Mark the desired position on the wall for the mounting bracket. Use a level to ensure it is perfectly horizontal.
Step 2: Screw the mounting bracket securely to the wall using appropriate anchors and screws for your wall type.
Step 3: Carefully lift the mirror and engage its integrated cleat with the wall-mounted bracket, ensuring it is securely seated.

Diagram illustrating the three-step French cleat mounting process for the mirror — Figure 4: The French cleat mounting system simplifies installation, allowing for both horizontal and vertical orientation.

Power Connection Options

The mirror offers flexible power connection methods:

Plug-in: Connect the mirror's power cord directly into a standard wall outlet.
Hardwired: For a seamless look, the mirror can be hardwired into your electrical system, connecting to a wall switch. This option requires professional electrical installation.

Images showing options for plug-in or hardwired power connection for the mirror — Figure 5: The mirror supports both plug-in and hardwired electrical connections for versatile installation.

Operating Instructions

LED Lighting and Dimming

The mirror features integrated LED lighting with stepless dimming and a memory function.

Turning On/Off: Tap the touch sensor on the mirror surface to turn the LED lights on or off.
Adjusting Brightness: Press and hold the touch sensor to smoothly adjust the brightness from 10% to 100%. Release when the desired brightness is achieved.
Memory Function: The mirror will remember your last brightness setting, ensuring it returns to your preferred illumination level when turned on again.

Image demonstrating the stepless dimming feature of the LED mirror, showing brightness levels from 5% to 100% — Figure 6: The stepless dimming function allows for precise brightness control, with a memory feature to recall your last setting.

Anti-Fog Function

The independent anti-fog function ensures a clear reflection even in steamy bathroom conditions.

Activating Anti-Fog: Tap the dedicated anti-fog touch sensor on the mirror surface to activate the defogging function.
Automatic Shut-off: For safety and energy efficiency, the anti-fog function will automatically shut off after one hour of continuous operation.

Image showing the fast and safe anti-fog feature of the mirror, with arrows indicating heat distribution — Figure 7: The anti-fog feature quickly clears condensation from the mirror surface, automatically deactivating after one hour.

Maintenance

To ensure the longevity and optimal performance of your Keonjinn Bathroom Mirror, follow these maintenance guidelines:

Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges. Wipe gently to avoid streaks.
Cleaning the Frame (if applicable): For frameless mirrors, simply clean the glass edges. For framed mirrors, wipe the frame with a soft, damp cloth and dry immediately. Avoid harsh chemicals that may damage the finish.
Electrical Components: Do not attempt to clean or service the electrical components yourself. If you notice any issues, contact a qualified electrician or customer support.
Avoid Excessive Moisture: While the mirror is waterproof (IP44 rated), avoid direct water spray onto the electrical components or prolonged exposure to extremely high humidity without proper ventilation.

Troubleshooting

This section addresses common issues you might encounter with your mirror. If the problem persists, please contact customer support.

Problem	Possible Cause	Solution
LED lights do not turn on.	No power supply. Loose electrical connection. Faulty LED driver or strip.	Check if the mirror is properly plugged in or if the hardwired connection is secure. Verify the wall switch (if hardwired) is in the ON position. Check your home's circuit breaker. If issues persist, contact a qualified electrician or customer support.
Anti-fog function not working.	Function not activated. Power issue.	Ensure you have tapped the dedicated anti-fog touch sensor. Verify the mirror has power. Allow a few minutes for the defogger to heat up.
Lights flicker or dim unexpectedly.	Unstable power supply. Loose wiring. LED driver issue.	Ensure stable power. Check all connections (if accessible and safe to do so, or consult an electrician). Contact customer support for potential LED driver replacement.

Product Specifications

Feature	Detail
Brand	Keonjinn
Model Dimensions	28"L x 40"W
Shape	Rectangular
Frame Material	Frameless
Glass Material	5mm High Quality Glass with Silver Coating (HD Tempered Glass)
Mounting Type	Wall Mount (French Cleat)
Special Features	Adjustable Brightness (Stepless Dimmable), Anti-Fog, Lighted, Shatterproof
LED Color Temperature	Cool White (6000K)
LED Density	120 LEDs/m
Color Rendering Index (CRI)	CRI90+
Waterproof Rating	IP44
Certifications	UL Listed LED Driver, UL & FCC Certified
Item Weight	33.1 Pounds

Infographic summarizing key features of the Keonjinn mirror including defogging, dimming, tempered glass, UL listing, and waterproof rating — Figure 8: Key features and certifications of the Keonjinn Bathroom Mirror.

Warranty and Support

Keonjinn is committed to providing high-quality products and excellent customer service.

Warranty Information

2-Year Warranty: The product is covered by a 2-year warranty.
30-Day No-Hassle Returns: You may return the product within 30 days of receipt.
Free Replacement for Damaged Products: If your mirror arrives damaged, please send photos of the damaged item to customer support for a free replacement without the need to return the damaged unit.
Free Repair: Free mirror repair is available within 3 years of purchase.

Customer Support

For any inquiries or support regarding your Keonjinn product, please follow these steps:

Locate the product on the platform where it was purchased (e.g., Amazon.com).
Click on the "Keonjinn" brand name or seller name to access their store or seller profile.
Select "Ask a question" to open the Seller Messaging Assistant.
Follow the prompts to type your question and submit it. Include your order number and product details for faster assistance.

Keonjinn offers 7x24 hours online support.

Diagram showing steps to contact Keonjinn customer support through the seller messaging system — Figure 9: Steps to contact Keonjinn customer support for assistance.

Keonjinn 28"L x 40"W

Keonjinn Bathroom Mirror with Lights User Manual