1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your truke Fit 1+ True Wireless Earbuds. Please read this manual carefully before using the product to ensure optimal performance and longevity.

Image 1.1: truke Fit 1+ Earbuds and Charging Case.
2. Package Contents
Verify that all items listed below are present in your product packaging:
- 2 x Bluetooth Earbuds (Left and Right)
- 1 x Charging Case
- 1 x Type-C Charging Cable
- 1 x User Manual
- 1 x Warranty Card
- 2 pairs of Eartips (additional sizes)
3. Product Overview
The truke Fit 1+ earbuds feature a compact design with touch controls and a portable charging case.
Earbud Components:
- Touch Control Area
- LED Indicator
- Microphone
- Charging Contacts
- Silicone Eartip
Charging Case Components:
- Earbud Charging Slots
- Battery Level Display
- Type-C Charging Port (located at the back/bottom)
4. Setup
4.1 Charging the Earbuds and Case
For first-time use, fully charge the earbuds and charging case.
- Place the earbuds into the charging case. Ensure they are correctly seated in their respective L/R slots.
- Connect the Type-C charging cable to the charging port on the case and to a USB power source.
- The LED indicator on the earbuds and the digital display on the case will show charging status.
- A full charge for the earbuds provides up to 8 hours of playtime. The 300mAh charging case provides an additional 22 hours, totaling up to 30 hours of playtime.

Image 4.1: Charging case with earbuds, showing battery life.
4.2 Pairing with a Device
The earbuds utilize Bluetooth 5.1 for stable and fast connectivity.
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your smartphone or Bluetooth-enabled device, navigate to the Bluetooth settings.
- Search for available devices and select "Truke Fit 1+" from the list.
- Once connected, the earbuds will indicate successful pairing (e.g., an audible prompt or LED change).
- The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

Image 4.2: Bluetooth pairing process.
5. Operating Instructions
5.1 Power On/Off
- Power On: Open the charging case, or long-press the touch control area on both earbuds for 2-3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for 5 seconds.
5.2 Touch Controls
The truke Fit 1+ earbuds feature intuitive touch controls for various functions.
- Play/Pause Music: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Long press on either earbud for 2 seconds.
- Activate Voice Assistant (Google Assistant/Siri): Triple tap on the left earbud.

Image 5.1: Touch control functions.
5.3 Dedicated Gaming Mode
Enhance your gaming experience with reduced audio latency.
- Activate Gaming Mode: Triple tap on the right earbud.
- This mode provides low latency of up to 85ms (with SBC Codec) for synchronized audio during gameplay.
- To exit Gaming Mode, triple tap the right earbud again.

Image 5.2: Dedicated Gaming Mode.
6. Maintenance
6.1 Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove eartips and clean them separately with mild soap and water, then dry thoroughly before reattaching.
- Ensure charging contacts on both earbuds and case are free from dust and debris.
6.2 Storage
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Avoid storing in extreme temperatures or high humidity.
6.3 Water Resistance (IPX4)
The truke Fit 1+ earbuds are rated IPX4 water-resistant, meaning they are protected against splashing water from any direction.
- They are suitable for use during workouts and light rain.
- Do not submerge the earbuds in water or expose them to heavy rain or strong jets of water.
- The charging case is not water-resistant.

Image 6.1: IPX4 Water and Sweat Resistance.
7. Troubleshooting
If you encounter issues with your truke Fit 1+ earbuds, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing |
|
| Only one earbud working |
|
| No sound or low volume |
|
| Earbuds not charging |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | truke Fit 1+ |
| Model Number | B097 |
| Connectivity Technology | Bluetooth 5.1 |
| Audio Driver Size | 10mm Dynamic Driver |
| Audio Codec Support | AAC, SBC |
| Earbud Playtime (Single Charge) | Up to 8 hours |
| Total Playtime (with Charging Case) | Up to 30 hours (300mAh case) |
| Charging Time | Approximately 1.5 - 2 hours for earbuds and case |
| Water Resistance Rating | IPX4 (Earbuds only) |
| Dedicated Gaming Mode | Yes, with low latency (up to 85ms) |
| Control Type | Touch Control |
| Compatible Devices | Android, Windows, iOS devices |
| Item Weight | 41 grams (total) |
| Product Dimensions | 7.1 x 4 x 3.1 cm |
9. Warranty and Support
9.1 Warranty Information
The truke Fit 1+ True Wireless Earphones come with a 6-month warranty from the date of purchase.
- Mandatory registration is required on the truke website within 10 days of purchase to activate the warranty.
- Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For any queries, technical assistance, or warranty claims, please contact truke customer support:
- Contact Number: +919354170767
- Email: support@eccentricindia.com
- Importer: Eccentric Enterprises Private Limited, Office No. 111, 1st Floor, Maruti Chamber, Plot No. 857-A, Kalamboli, NAVI MUMBAI, Raigarh, Maharashtra, India, 410218.