1. Product Overview
The Gallagher S6 Solar Electric Fence Charger is a compact and portable solar energizer designed for effective containment and protection in various settings. It is suitable for gardens, chicken coops, goat pens, and pet enclosures, offering a reliable solution without the bulk of larger units. This energizer is ideal for homesteads and backyard setups, providing consistent power delivery for small livestock, poultry, and pet management.

Image 1.1: The Gallagher S6 Solar Electric Fence Charger, a compact solar-powered unit.
2. Important Safety Information
WARNING: Read all instructions before using this product.
- Do not connect the energizer to any other power source than specified.
- Keep electric fence lines clear of vegetation and debris to prevent short circuits.
- Ensure proper grounding as specified in the setup section to prevent electric shock hazards.
- Avoid touching the electric fence with bare hands or any part of the body.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Keep out of reach of children.
3. Package Contents
Verify that all components are present in the package:
- Gallagher S6 Solar Energizer Unit
- Fence Lead with Clip
- User Guide (this document)
- Internal Lithium Battery (pre-installed)

Image 3.1: Visual representation of the Gallagher S6 Solar Fence Energizer and its included components: solar panel, internal lithium battery, fence lead set, and user guide.
4. Setup and Installation
The Gallagher S6 is designed for straightforward installation. Follow these steps for optimal performance:
- Grounding Rod Selection: Obtain an unpainted grounding rod with a diameter of up to 0.5 inches (not included). The energizer mounts directly onto this rod, which also serves as the electrical ground. No other grounding method is supported.
- Grounding Rod Installation: Drive the grounding rod into the soil. For best performance, it should be driven at least 18 inches deep. In dry or sandy areas, deeper installation may be required to ensure adequate grounding. This unit does not mount to T-posts.
- Mounting the Energizer: Slide the Gallagher S6 unit onto the top of the installed grounding rod. Ensure it is securely seated.
- Connecting the Fence Lead: Attach the provided fence lead with the clip to your electric fence line. The energizer will then deliver power to the fence.

Image 4.1: The Gallagher S6 energizer installed in a garden, mounted on a grounding rod and connected to a fence line.

Image 4.2: The Gallagher S6 unit with its solar panel exposed to sunlight, indicating its self-charging capability.
5. Operation
The S6 Solar Electric Fence Charger is designed for continuous, low-maintenance operation:
- Solar Power: The built-in solar panel charges a high-efficiency lithium battery. This battery can sustain operation for up to 3 weeks without direct sunlight, making it suitable for various weather conditions and seasonal setups.
- Consistent Power Delivery: Digital pulse control ensures a steady voltage output to the fence. This maintains dependable day-and-night fence performance, even through light vegetation.
- Automatic Operation: Once installed and exposed to sunlight, the unit will automatically charge and energize the fence. The green indicator light confirms operation.

Image 5.1: The Gallagher S6 energizer operating in an outdoor environment, demonstrating its water-resistant case and lightning protection for reliable performance in all weather conditions.
6. Maintenance
Regular maintenance ensures the longevity and effectiveness of your Gallagher S6 energizer:
- Solar Panel Cleaning: Periodically clean the solar panel surface with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum solar charging efficiency.
- Connection Checks: Regularly inspect all connections, including the grounding rod connection and the fence lead clip, to ensure they are secure and free from corrosion. Loose connections can reduce fence performance.
- Vegetation Management: Keep the fence line clear of vegetation. Contact with plants can reduce the effectiveness of the electric fence by drawing power from the system.
- Battery Care: While the lithium battery is designed for durability, ensure the unit receives adequate sunlight for charging, especially after prolonged periods of overcast weather.
7. Troubleshooting
If your Gallagher S6 Solar Electric Fence Charger is not performing as expected, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/No pulse light | Insufficient sunlight for charging Battery discharged Faulty connections | Relocate unit to an area with more direct sunlight Allow several days for battery to recharge Check all connections for tightness and corrosion |
| Weak or inconsistent shock | Excessive vegetation on fence line Poor grounding Fence shorting out | Clear vegetation from fence line Ensure grounding rod is driven deep enough (at least 18 inches) and is unpainted Inspect fence for breaks, loose insulators, or contact with conductive materials |
| Unit not charging | Dirty solar panel Prolonged lack of sunlight | Clean solar panel surface Ensure unit is placed in an area receiving maximum daily sunlight |
8. Technical Specifications
- Model: S6 Lithium Solar
- Part Number: GALLAGHER - G349404
- Material: Metal
- Item Dimensions (L x W x H): 5.7 x 5 x 6.7 inches
- Item Weight: 2.4 pounds
- Power Source: Solar (with internal Lithium Polymer battery)
- Battery Cell Type: Lithium-Phosphate
- UPC: 644493349408
9. Warranty and Support
The Gallagher S6 Solar Electric Fence Charger is backed by a 3-year manufacturer warranty. For technical assistance, product inquiries, or warranty claims, please contact Gallagher North America. Support services are based in Kansas City, MO, providing U.S.-based assistance.
For more information, visit the official Gallagher store: Gallagher Store on Amazon





