Introduction
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of the Rice Lake 107243 TC Balance. Please read this manual thoroughly before using the balance to ensure safe and efficient operation.
Product Overview
The Rice Lake 107243 is an accessory designed for use with TC Balances, enhancing their functionality. It is manufactured by Rice Lake, a trusted name in weighing systems.
Figure 1: Rice Lake brand logo. This image displays the official logo for Rice Lake Weighing Systems, featuring the company name in bold black letters with "WEIGHING SYSTEMS" underneath, and a red bar above the text.
Setup
Proper setup is crucial for accurate performance of the TC Balance with the 107243 operating manual. Follow these steps carefully:
- Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing slip are present and undamaged.
- Placement: Place the TC Balance on a stable, level surface, free from vibrations, drafts, and direct sunlight. Ensure adequate space for operation and maintenance.
- Connection: Connect the 107243 manual operating accessory to the TC Balance according to the specific instructions provided with your TC Balance model. Typically, this involves securing it to the balance's designated port or area.
- Power On: Once connected, power on the TC Balance. The 107243 accessory does not require separate power.
- Initial Calibration: Perform an initial calibration of the TC Balance as per its own user manual after connecting the 107243 accessory. This ensures optimal accuracy.
Operating Instructions
The 107243 manual operating accessory is designed to facilitate specific functions of the TC Balance. Refer to your TC Balance's primary manual for general weighing procedures. The 107243 typically assists with:
- Manual Tare Function: Use the designated controls on the 107243 (if applicable) to manually tare the balance. This sets the display to zero after placing a container on the pan.
- Mode Selection: Some versions may offer manual selection of weighing modes (e.g., counting, percentage weighing) directly through the accessory. Consult the TC Balance manual for compatibility.
- Data Input/Output: If the 107243 includes manual input options or a display, use it to enter parameters or view specific data points related to the balance operation.
Always ensure the balance is stable and level before taking any measurements. Avoid sudden movements or vibrations during operation.
Maintenance
Regular maintenance ensures the longevity and accuracy of your Rice Lake 107243 and the associated TC Balance.
- Cleaning:
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
- Ensure no liquids enter the internal components.
- Inspection: Periodically inspect all connections and cables for signs of wear or damage.
- Storage: When not in use for extended periods, store the balance and accessory in a clean, dry environment, protected from dust and extreme temperatures.
- Calibration: Regular calibration of the TC Balance (as per its manual) is essential for maintaining accuracy, especially after relocation or significant temperature changes.
Troubleshooting
This section provides solutions to common issues you might encounter with the Rice Lake 107243 accessory in conjunction with your TC Balance.
| Problem | Possible Cause | Solution |
|---|---|---|
| Accessory not responding | Loose connection; Incorrect installation. | Check all connections to the TC Balance. Ensure the accessory is installed correctly as per setup instructions. |
| Inaccurate readings (after accessory connection) | Balance not calibrated; Environmental interference. | Perform a full calibration of the TC Balance. Ensure the operating environment is stable (no drafts, vibrations). |
| Display errors on TC Balance | Software conflict; Damaged accessory. | Disconnect the 107243, restart the TC Balance. If the error persists, consult the TC Balance manual. If the error resolves, the accessory may be faulty. |
If the problem persists after attempting these solutions, please contact Rice Lake customer support.
Specifications
Key specifications for the Rice Lake 107243 manual operating accessory and related product information:
- Model Number: 107243
- Brand: Rice Lake
- Type: Manual Operating Accessory for TC Balance
- Manufacturer: Rice Lake
- First Available: 4 March 2025
- ASIN: B091FKWFK8
Note: Specific operational parameters and compatibility depend on the TC Balance model it is paired with. Refer to your TC Balance's manual for detailed technical specifications.
Warranty and Support
For warranty information and technical support regarding the Rice Lake 107243, please refer to the documentation included with your original purchase or visit the official Rice Lake website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support: For assistance with setup, operation, or troubleshooting that is not covered in this manual, please contact Rice Lake customer service. Contact details can usually be found on the manufacturer's website or on the product packaging.
