1. Introduction
This manual provides instructions for the YING RAY T-B16 replacement infrared remote control. This remote is designed to operate specific Twin Star CHIMNEYFREE and Dura Flame fireplace and stove heater models. It is not a universal remote control.
Important Note: If you are uncertain about compatibility with your unit, please verify your fireplace or stove heater model number before use.
Compatible models include, but are not limited to:
- 1811040FGL, 1811040FSL, 1811040CGL
- 2311040FGL, 2311040FSL, 2311040CGL
- 2511040FGL, 2511040FSL, 2511040CGL
- 2611040FGL, 2611040FSL, 2611040CGL
- 2811040FGL, 2811040FSL, 2811040CGL
- 3211040FGL, 3211040FSL, 3211040CGL
- 3311040FGL, 3311040FSL, 3311040CGL
- 4211040FGL, 4211040FSL, 4211040CGL
- 181RM9984-C325, 1811801FGL
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two (2) AAA 1.5V batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Note: Batteries are not included with the remote control.

The back of the YING RAY T-B16 remote control is shown with the battery compartment cover removed, revealing the two AAA battery slots. A single AAA battery is depicted next to the remote, indicating the required battery type for operation.
2.2 Initial Use
The YING RAY T-B16 remote control operates without any programming. Once batteries are correctly installed, it is ready for immediate use with compatible fireplace or stove heater models.
3. Operating Instructions
Point the remote control directly at the infrared receiver on your fireplace or stove heater. Ensure there are no obstructions between the remote and the unit.

This image displays the YING RAY T-B16 remote control alongside a simplified diagram illustrating its button functions. The remote features buttons for Power, Flame, Speed, Timer, and directional controls.
Button Functions:
- POWER: Turns the fireplace/heater unit ON or OFF.
- FLAME: Adjusts the flame brightness or effect settings.
- SPEED: Controls the fan speed or other operational speeds.
- TIMER: Sets or adjusts the operational timer function.
- Up Arrow (▲): Increases settings (e.g., temperature, flame intensity).
- Down Arrow (▼): Decreases settings (e.g., temperature, flame intensity).
4. Troubleshooting
- Remote not responding:
- Ensure fresh AAA batteries are installed with correct polarity.
- Check for any obstructions between the remote and the fireplace/heater unit.
- Verify that the remote is pointed directly at the unit's infrared receiver.
- Confirm your fireplace/heater model is listed as compatible.
- Intermittent operation:
- Replace batteries if they are low.
- Clean the remote's infrared emitter and the unit's receiver with a soft, dry cloth.
5. Specifications
| Model | T-B16 |
| Brand | YING RAY |
| Power Source | 2 x AAA 1.5V Batteries (not included) |
| Technology | Infrared (IR) |
| Special Feature | Ergonomic design |
6. Maintenance
- Keep the remote control dry and away from extreme temperatures.
- Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
7. Warranty and Support
This product is manufactured by ZHUHAI YINGRAY TRADING CO., LTD. For support or inquiries regarding this replacement remote control, please contact your retailer or the manufacturer directly.
Please retain your purchase receipt for any warranty claims.