Onisamt FAN-35T
Contents
Onisamt Ceiling Fan Remote Control Kit User Manual
Model: FAN-35T | For FAN-35T, KUJCE9603, L3HFAN35T1, 35T1+FAN28R Kit
Product Overview
This universal ceiling fan remote control and receiver kit is designed as a replacement for a wide range of 3-speed AC ceiling fans, including popular brands such as Harbor Breeze, Hunter, Allen+Roth, and Kichler. It provides convenient control over fan speeds and light functions, enhancing the usability of your ceiling fan.

Setup and Installation
Proper installation is crucial for the safe and effective operation of your ceiling fan remote control kit. Please follow these steps carefully.
1. Setting the DIP Switches
The remote control and receiver communicate via a unique code set by DIP switches. Both the remote and the receiver must have their DIP switches set to the exact same pattern for them to function together.
- Locate the DIP switches on both the remote control (usually inside the battery compartment) and the receiver unit.
- Using a small tool, set the switches on the new remote control to match the existing pattern on your original remote or the receiver unit. If installing a new kit, choose any pattern and ensure both remote and receiver match.


2. Receiver Wiring and Installation
Before beginning, ensure the power to the ceiling fan circuit is turned off at the circuit breaker to prevent electrical shock.
- Disconnect the existing wiring from your ceiling fan.
- Connect the receiver wires to the corresponding fan and house wires as per the diagram. The receiver has 5 wires (excluding the antenna) with marked functions:
- White (AC 110-120V 60Hz): Connects to the neutral wire from the house.
- Black (AC 110-120V 60Hz): Connects to the live wire from the house.
- Blue (Output): Connects to the fan's light wire.
- Black (Output): Connects to the fan's motor wire.
- White (Output): Connects to the fan's neutral wire.
- Brown (Antenna): This is the antenna wire and should not be connected to any power source.
- Carefully tuck the receiver into the fan's canopy, ensuring no wires are pinched.
- Secure the canopy to the ceiling fan bracket.


3. Battery Installation (Remote Control)
The remote control requires one 12V battery (not included). Open the battery compartment on the back of the remote and insert the battery, observing the correct polarity.
Operating Instructions
Once installed and powered, you can operate your ceiling fan using the remote control.
Remote Control Functions:
- Fan Speed Buttons: Control the fan's three speeds (High, Medium, Low).
- Fan OFF Button: Turns the fan off.
- Light Dimmer Button:
- For incandescent lights, this button controls the brightness (dimming function).
- For LED and CFL lights, this button primarily controls the ON/OFF function. Most LED and all CFL lights are not dimmable with this kit, and attempting to dim them may cause flickering.
Important Operating Considerations:
- If your ceiling fan has a pull cord switch for the light, ensure the light cord is pulled to the ON state before using the remote.
- If your ceiling fan has a pull cord switch for the fan speed, ensure the fan cord is pulled to the maximum speed setting before using the remote.
- If your wall-operated fan has a 3-speed adjustment, you must turn the wall fan switch to maximum speed.
- Failure to set pull cords or wall switches to the correct positions (light ON, fan MAX speed) may cause the receiver to burn out.



Maintenance
To ensure the longevity and proper functioning of your remote control kit, follow these simple maintenance guidelines:
- Battery Replacement: Replace the 12V battery in the remote control when its performance degrades or it stops responding. Ensure correct polarity when inserting the new battery.
- Cleaning: Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Storage: If storing the remote for an extended period, remove the battery to prevent leakage.
Troubleshooting
If you encounter issues with your Onisamt ceiling fan remote control kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding / Fan not turning on. |
|
|
| Light flickers or does not dim. |
|
|
| Fan operates but light does not, or vice versa. |
|
|
Specifications
- Model Number: FAN-35T
- Product Dimensions: 4.6 x 2.1 x 1.2 inches
- Item Weight: 7 ounces
- Power Input: AC 110-120V, 60Hz
- Receiver Rated Power: 240W
- Remote Battery Type: 1 x 12V (not included)
- Fan Control: 3-speed (High/Medium/Low)
- Light Control: Dimmer for incandescent, ON/OFF for non-dimmable LED/CFL
- Connectivity Technology: Frequency
- Manufacturer: Breeze Bay
- Country of Origin: China

Warranty and Support
While specific warranty details are not provided in this manual, Onisamt is committed to product quality and customer satisfaction. For any questions, technical assistance, or support regarding your ceiling fan remote control kit, please contact the seller, Onisamt Ceiling Fan, through the platform where you made your purchase.
We recommend retaining your purchase receipt for any potential warranty claims or support inquiries.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.