Introduction
This manual provides essential information for the proper use, setup, and maintenance of your Citizen Star Wars ANI-Digi Quartz Watch, model JG2109-50W. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.
Product Features
- Model: JG2109-50W
- Design: Star Wars Trench Run inspired rectangular black stainless steel case and band.
- Display: Dual time (X-Wing and Tie Fighter Pilot views), digital display, temperature display in Celsius, LCD display.
- Movement: Quartz.
- Crystal: Mineral Crystal.
- Water Resistance: 30 meters.
- Clasp: Sliding Clasp.

Figure 1: Front view of the Citizen Star Wars ANI-Digi Quartz Watch, model JG2109-50W, showcasing its black finish and unique dial.
Setup
- Initial Power-Up: This watch is a quartz movement. Ensure the watch is running upon receipt. If not, it may require a battery replacement or activation.
- Time and Date Setting: Refer to the detailed instructions provided with the watch for setting the analog and digital time, date, and temperature. This typically involves pulling out the crown and using the pushers on the side of the case.
- Band Adjustment: The watch features a stainless steel band with a sliding clasp. For optimal comfort and fit, the band may require adjustment by adding or removing links. This service can be performed by a qualified jeweler or watch repair shop.

Figure 2: Side view of the watch, showing the crown and pushers used for setting functions.
Operating Instructions
The Citizen Star Wars ANI-Digi watch offers a range of functions accessible via its crown and side pushers. Specific operations may vary slightly, so always refer to the full instruction manual for precise details.
- Setting Analog Time: Pull the crown out to the designated position and rotate to set the hour and minute hands. Push the crown back in to secure.
- Setting Digital Time/Date/Temperature: Use the mode button (typically on the left side) to cycle through different digital display modes (time, date, alarm, temperature). Use the adjustment buttons (typically on the right side) to set the values in each mode.
- Dual Time Display: The watch features dual time zones, often represented by the X-Wing and Tie Fighter Pilot views on the dial. Consult your specific model's manual for instructions on setting and switching between these displays.
- Alarm Function: Activate and set the alarm using the digital display controls.
Video 1: A brief overview of the Citizen Star Wars ANI-Digi Black Version watch, demonstrating its design and digital display features.
Maintenance
- Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and smudges. For the stainless steel band, a slightly damp cloth can be used, followed by drying.
- Water Resistance: This watch is water resistant up to 30 meters (3 ATM). This means it is suitable for everyday use, such as splashes or brief immersion in water. It is not recommended for swimming, showering, or diving. Avoid operating the crown or pushers when the watch is wet.
- Temperature Exposure: Avoid exposing the watch to extreme temperatures, both hot and cold, as this can affect its accuracy and battery life.

Figure 3: Rear view of the watch, displaying the engraved Star Wars logo and model information.
Troubleshooting
If you encounter any issues with your Citizen Star Wars ANI-Digi watch, consider the following common solutions before seeking professional service:
- Watch Not Running: Ensure the watch has a functional battery. If the watch is an Eco-Drive model, ensure it has been sufficiently exposed to light for charging.
- Incorrect Time/Date: Verify that the crown is fully pushed in after setting. Re-set the time and date according to the operating instructions.
- Digital Display Issues: Check if the watch is in the correct mode. If the display is dim, ensure adequate light exposure for charging (if applicable).
For persistent issues or repairs, please contact Citizen customer support or an authorized service center.
Specifications
| Model Number | JG2109-50W |
| Material | Stainless Steel |
| Water Resistance | 30 Meters (3 ATM) |
| Movement Type | Quartz |
| Crystal Type | Mineral Crystal |
| Package Dimensions | 6.26 x 4.53 x 4.33 inches |
| Item Weight | 5.38 ounces |
| Manufacturer | Citizen |
| Department | Mens |
| Date First Available | March 30, 2021 |
Warranty and Support
Your Citizen Star Wars ANI-Digi Quartz Watch JG2109-50W comes with a 5 Year Limited Warranty. This warranty covers manufacturing defects under normal use. For detailed terms and conditions, please refer to the warranty card included with your purchase or visit the official Citizen website.
For technical support, service, or warranty claims, please contact Citizen customer service through their official website or an authorized service center. Keep your proof of purchase for warranty validation.





