SNIXWOO Side Steps Running Boards Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SNIXWOO Side Steps Running Boards. Designed for the Hyundai Palisade (2020-2025 models), these running boards offer a convenient and safe stepping surface for vehicle entry and exit. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

• Always ensure the vehicle is parked on a level surface with the parking brake engaged before beginning installation.
• Wear appropriate personal protective equipment, including gloves and eye protection, during installation.
• Do not overtighten fasteners, as this can damage components. Refer to torque specifications if available.
• Regularly inspect the running boards and mounting hardware for any signs of wear, damage, or looseness. Tighten fasteners as needed.
• Avoid stepping on the running boards with excessive force or while carrying heavy loads beyond their intended capacity.

3. Package Contents

Verify that all components are present before beginning installation:

• 2x Foot Boards (Left and Right)
• All Necessary Mounting Hardware
• 1x Installation DIY Guide (Refer to this manual for detailed steps)

Image: All components included in the package, showing the two running boards and mud flaps.

4. Setup and Installation

This product is designed for a no-drilling installation on compatible Hyundai Palisade models (2020-2025). While the installation process is designed to be straightforward, professional installation is recommended if you are unfamiliar with vehicle modifications. For detailed visual guidance, it is advisable to consult the manufacturer's video installation manual or other reputable online resources.

1. Prepare the Vehicle: Park the Hyundai Palisade on a flat, stable surface. Engage the parking brake and turn off the engine.
2. Locate Mounting Points: Identify the factory mounting points along the vehicle's rocker panel. These are typically pre-drilled holes or existing attachment points.
3. Attach Brackets: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Ensure all bolts are hand-tightened initially.
4. Position Running Boards: Carefully lift and align each running board with the installed brackets. Attach the running boards to the brackets using the remaining hardware.
5. Adjust and Tighten: Adjust the position of the running boards to ensure proper alignment and clearance. Once satisfied with the positioning, fully tighten all bolts and nuts according to the manufacturer's torque specifications (if provided). Do not overtighten.
6. Install Mud Flaps (if applicable): If your package includes mud flaps, attach them to the designated areas on the running boards or vehicle as per specific instructions.
7. Final Inspection: Double-check all connections to ensure they are secure. Gently test the stability of the running boards before regular use.

Image: SNIXWOO Side Steps Running Boards installed on a Hyundai Palisade.

Image: Detail of the non-slip stepping surface on the running board.

5. Operating Instructions

The SNIXWOO Side Steps Running Boards are designed to provide a stable platform for easier access to your vehicle's cabin. To use them:

• Step onto the running board with one foot, ensuring your weight is centered.
• Use the vehicle's door frame or handle for additional support if needed.
• Carefully transfer your weight into the vehicle.
• When exiting, reverse the process, stepping onto the running board first before descending.
• Ensure the stepping surface is clear of ice, snow, mud, or debris to prevent slips.

6. Maintenance

Regular maintenance will ensure the longevity and safe operation of your running boards:

• Cleaning: Clean the running boards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Rinse thoroughly and dry to prevent water spots.
• Inspection: Periodically inspect all mounting hardware (bolts, nuts, brackets) for tightness. Vibrations from driving can cause fasteners to loosen over time. Tighten any loose hardware immediately.
• Damage Check: Check the running boards for any signs of physical damage, such as cracks, bends, or corrosion. Address any damage promptly to maintain structural integrity and appearance.
• Winter Care: In areas with snow and ice, ensure the stepping surface is clear before use. Salt and de-icing chemicals can accelerate corrosion; clean the boards thoroughly after exposure.

7. Troubleshooting

If you encounter issues with your SNIXWOO Side Steps Running Boards, consider the following:

• Running Board Feels Loose:
  • Solution: Inspect all mounting bolts and nuts. Tighten any loose fasteners. Refer to the installation section for proper tightening procedures.
• Unusual Noises (e.g., rattling, squeaking):
  • Solution: Check all contact points between the running board, brackets, and vehicle frame. Ensure no components are rubbing against each other. Verify all hardware is securely tightened.
• Difficulty Stepping On/Off:
  • Solution: Ensure the stepping surface is clean and free of debris, ice, or mud. The non-slip surface requires direct contact for optimal grip.

If problems persist after troubleshooting, please contact SNIXWOO customer support for assistance.

8. Specifications

9. Warranty and Support

For any questions regarding installation, damaged parts, or product support, please contact SNIXWOO customer service. You can typically reach the seller by clicking their name on the product page or by navigating to "Your Orders" and selecting "Get help" or "Get product support." SNIXWOO aims to respond with a solution within 24 hours.

For a PDF and video installation manual, please contact the seller directly.