Introduction
This manual provides instructions for the setup, operation, and maintenance of your ZdalaMit RC-928R replacement remote control. This remote is designed to be compatible with various Onkyo AV Receiver models, offering a direct replacement without the need for programming.
Compatible Onkyo AV Receiver Models:
- TX-SR353
- HT-S3800
- HT-S3900
- HT-R397
- HTP-395
- TX-SR373
Setup
The ZdalaMit RC-928R remote control requires no programming or pairing. Simply install the batteries, and it will be ready for immediate use with your compatible Onkyo AV Receiver.
Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open the compartment.
- Insert two (2) 1.5V AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
Figure 1: Front view of the ZdalaMit RC-928R remote control. The remote features various buttons for controlling an Onkyo AV Receiver.
Figure 2: Angled view of the ZdalaMit RC-928R remote control, highlighting the button layout and ergonomic design.
Operating Instructions
This remote control provides full functionality for your compatible Onkyo AV Receiver. Point the remote directly at the receiver's infrared sensor for optimal performance.
Key Functions Overview
The remote control features dedicated buttons for various functions. Refer to your Onkyo AV Receiver's manual for specific functions of each button if needed.
- RECEIVER (Power): Turns the AV Receiver on or off.
- BD/DVD, CBL/SAT, STRM BOX, AUDIO SEL, GAME, CD, TV, LATE NIGHT, TUNER, USB, BLUETOOTH, M.OPT: Input selection buttons to switch between different audio/video sources.
- TOP MENU, QUICK MENU: Access menu functions on your connected devices or receiver.
- Navigation Pad (Up, Down, Left, Right, ENTER): Used for menu navigation and selection.
- VOL (+/-): Adjusts the master volume level.
- DIRECT, STEREO, SURR, DSP: Sound mode selection buttons.
- BASS (+/-), TREBLE (+/-): Adjusts bass and treble levels.
- DISPLAY, TUNING (+/-), EDIT, SLEEP, PRESET (+/-), PTY, BAND, DIMMER: Buttons for tuner functions, display settings, and other utility features.
- Playback Controls (Play, Pause, Stop, Fast Forward, Rewind, Skip): Controls playback of media on connected devices.
Maintenance
Battery Replacement
Replace batteries when the remote's range decreases or if it becomes unresponsive. Always replace both batteries simultaneously with new 1.5V AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical wipes, as these can damage the remote's surface or internal components.
Troubleshooting
| Problem | Solution |
|---|---|
| Remote is not responding. |
|
| Limited operating range. |
|
| Certain buttons do not work. |
|
Specifications
- Model: RC-928R
- Brand: ZdalaMit
- Power Supply: 2 x 1.5V AAA Alkaline Batteries (not included)
- Product Dimensions: 6.2 x 2 x 0.6 inches (approximately)
- Item Weight: 1.41 ounces (approximately, without batteries)
- Compatible Devices: Onkyo AV Receivers (TX-SR353, HT-S3800, HT-S3900, HT-R397, HTP-395, TX-SR373)
- Special Feature: Ergonomic design
- Color: Black
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact your retailer or the manufacturer's customer support. We are available to help with any queries you may have.
