OCOM B091C3L13H

OCOM USB Barcode Scanner Instruction Manual

1. Introduction

This instruction manual provides detailed information on the installation, operation, maintenance, and troubleshooting of your new OCOM USB Barcode Scanner. Please read this manual carefully before using the device to ensure proper functionality and to maximize its lifespan. Keep this manual for future reference.

2. Product Overview

The OCOM USB Barcode Scanner is a high-performance device designed for efficient and accurate barcode reading in various environments such as supermarkets, pharmacies, and warehouses. It features a bi-directional scanning capability and supports a wide range of barcode symbologies.

An image showing the black OCOM USB barcode scanner with its included stand and USB cable. The scanner is positioned on the stand, ready for use, with the coiled USB cable visible at the base.

3. Setup

3.1 Package Contents

OCOM USB Barcode Scanner
USB Cable
Scanner Stand
Instruction Manual (this document)

3.2 Connecting the Scanner

Unpack all components from the box.
Connect the USB cable to the scanner's port.
Plug the other end of the USB cable into an available USB port on your computer (Desktop or Laptop).
The operating system will typically detect and install the necessary drivers automatically. No additional driver installation is usually required for standard USB HID (Human Interface Device) operation.
Place the scanner on its stand if you intend to use it in hands-free mode.

4. Operating Instructions

4.1 Basic Scanning

Ensure the scanner is connected to your computer and powered on.
Open an application where you want the scanned data to appear (e.g., Notepad, Word, a POS system).
Point the scanner's laser beam at the barcode you wish to scan. Ensure the entire barcode is within the laser line.
Press the trigger button on the scanner.
A successful scan will typically be indicated by a beep sound and/or a green light. The barcode data will then appear in your active application as if typed from a keyboard.

4.2 Scanning Modes

The scanner supports both handheld and automatic scanning modes when used with the stand. When placed on the stand, it may automatically detect barcodes presented in its field of view without needing to press the trigger.

5. Maintenance

5.1 Cleaning the Scanner

To clean the scanner's exterior, use a soft, clean cloth lightly dampened with water or a mild cleaning solution.
Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic casing and optical components.
Ensure no liquid enters the scanner's internal components.
For the scanning window, use a lint-free cloth to gently wipe away dust or smudges.

5.2 Storage

When not in use, store the scanner in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from dust and physical impact.

6. Troubleshooting

Problem	Possible Cause	Solution
Scanner not reading barcodes	Barcode damaged or poorly printed Incorrect scanning angle Scanner not powered on/connected	Try scanning a different barcode Adjust the angle and distance Check USB connection and power indicator
No data output to computer	USB cable loose or faulty Incorrect interface settings (less common for USB) Application not active	Reconnect USB cable; try a different USB port Ensure the application window is active and ready for input
Scanner beeps but no data	Barcode symbology not enabled Data format issue	Refer to advanced programming guide (if available) to enable symbology Check application settings

7. Specifications

Category	Specification	Value
Performance Characteristics	Light Source	Visible laser (650-670nm)
	Scan Rate	100 scans per second
	Reading Distance	2.5 ~600mm (100% UPC/EAN)
	Scanner Type	Bi-directional
	Resolution	0.10mm (4mil) at PCS 0.9
	Print Contrast Minimum	20%, minimum reflective difference (@650nm)
	Decode Capability	UPC/EAN, UCC/EAN128, Code 39, Code 128, Codabar, Interleaved 2 of 5, Code 93, MSI, Code 11, ATA, RSS variants, Chinese 2 of 5
Physical Characteristics	Interfaces Supported	PS2, RS232, USB
	Voltage	DC 5V +/-5%
	Current	100 mA
	Power Source	Host power or external (RS232) power supply
	Scanning Angle	Inclination 45°, Elevation 60°
	Dimensions (L x W x H)	165.42mm X 69.72mm X 89.67mm
	Weight	140g (without stand)
	Color	Ivory and black
User Environment	Operating Temperature	0°C ~ 50°C
	Storage Temperature	-40°C ~ 70°C
	Humidity	5~95% relative humidity, non-condensing
	Electrostatic Discharge	Conforms to +/-15KV air discharge and +/-8KV of contact discharge
	Drop Specifications	Withstands multiple 1.5m drops to concrete
	EMI/RFI	FCC Class A and CE
Safety	Laser Safety	CDRH class 2 laser product

8. Warranty and Support

This OCOM USB Barcode Scanner comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact your point of purchase. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the vendor or manufacturer's customer support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.