JKSWT v28

Download PDF
Contents

JKSWT Wired Earbuds with Built-in Microphone (Model v28) - Instruction Manual

Model: v28 | Brand: JKSWT

1. Product Overview

The JKSWT Wired Earbuds provide a high-quality audio experience with the convenience of a built-in microphone and in-line controls. Designed for comfort and durability, these in-ear headphones are compatible with a wide range of devices featuring a 3.5mm headphone port.

JKSWT Wired Earbuds with 3.5mm jack and in-line controls

Image 1.1: JKSWT Wired Earbuds showing the earbuds, 3.5mm jack, and in-line control unit.

2. Package Contents

  • 1 x JKSWT Wired Earphone
  • 2 x Silicone Ear Tips (Small/Large) - Note: Medium size ear tips are pre-installed on the earphones.

3. Setup and Installation

Setting up your JKSWT Wired Earbuds is straightforward.

  1. Select Ear Tips: Choose the silicone ear tips that best fit your ears for optimal comfort and sound isolation. The earbuds come with medium tips pre-installed. Small and large sizes are included in the package. Gently pull off the existing tips and push on the desired size.
  2. Connect to Device: Insert the 3.5mm audio jack into the headphone port of your compatible device (smartphone, tablet, laptop, MP3 player, etc.).
  3. Position Earbuds: Place the earbuds securely into your ears. The earbud marked 'L' is for the left ear, and 'R' is for the right ear.
JKSWT Wired Earbuds 3.5mm jack compatibility with various devices

Image 3.1: The 3.5mm audio jack of the earbuds shown with various compatible devices like laptops, tablets, and smartphones.

4. Operating Instructions

The JKSWT Wired Earbuds feature an in-line control unit for easy management of calls and music playback.

Diagram of JKSWT Wired Earbuds in-line controls

Image 4.1: Detailed view of the in-line control unit, highlighting the volume buttons and multi-function button.

4.1. Call Management

  • Answer/End Phone Calls: Short press the multi-function button (center button).
  • Reject Phone Calls: Long press the multi-function button (center button).

4.2. Music Playback

  • Play/Pause Music: Single click the multi-function button (center button).
  • Next Track: Double click the multi-function button (center button).
  • Previous Track: Triple click the multi-function button (center button).

4.3. Volume Control

  • Increase Volume: Press the '+' button.
  • Decrease Volume: Press the '-' button.

5. Maintenance and Care

To ensure the longevity and optimal performance of your JKSWT Wired Earbuds, follow these care guidelines:

  • Cleaning: Regularly clean the ear tips with a soft, dry cloth. If necessary, remove the ear tips and wash them with mild soap and water, ensuring they are completely dry before reattaching. Do not use harsh chemicals or abrasive materials on the earbuds.
  • Cable Care: Avoid sharp bends, twists, or excessive pulling on the cable. Store the earbuds neatly to prevent tangling, which can damage the internal wiring. The cable is made of super-elastic PVC material for improved wear resistance.
  • Storage: When not in use, store the earbuds in a clean, dry place, away from extreme temperatures and direct sunlight.
  • Moisture: Keep the earbuds away from water and excessive moisture. They are not waterproof.
Cross-section of JKSWT earbud cable showing durable construction

Image 5.1: Diagram illustrating the durable construction of the earbud cable, featuring TPE outsourcing material, Kevlar bulletproof wire, and single crystal oxygen-free copper core.

6. Troubleshooting

If you encounter any issues with your JKSWT Wired Earbuds, please refer to the following common solutions:

  • No Sound:
    • Ensure the 3.5mm jack is fully inserted into your device's headphone port.
    • Check your device's volume settings and ensure it is not muted.
    • Test the earbuds with another device to rule out a device-specific issue.
    • Inspect the cable for any visible damage or breaks.
  • Poor Sound Quality (Distortion, Low Volume):
    • Ensure the ear tips are properly seated in your ears to create a good seal.
    • Clean any debris from the earbud grilles.
    • Adjust the volume on your device and using the in-line controls.
    • Test with another audio source or device.
  • Microphone Not Working:
    • Ensure the 3.5mm jack is fully inserted. Some devices require a TRRS (Tip-Ring-Ring-Sleeve) jack for microphone functionality, which these earbuds provide.
    • Check your device's microphone input settings.
    • Test the microphone with another application or device.
  • In-line Controls Not Responding:
    • Ensure the earbuds are securely connected to your device.
    • Some older devices or specific operating systems may have limited compatibility with in-line controls.
    • Restart your connected device.

7. Specifications

FeatureSpecification
Speaker DiameterΦ10.6mm
Frequency Response15-24KHz
Sensitivity103dB ±3dB
Impedance16Ω
Cable Length1.2m ±0.1m
Connector Type3.5mm Jack
MicrophoneBuilt-in
Noise ControlPassive Noise Reduction (via in-ear design)
MaterialPolyvinyl Chloride (Cable)
Model Numberv28
GTIN/UPC710955458718
Exploded view of JKSWT earbud components

Image 7.1: An exploded diagram showing the internal components of the earbud, illustrating its sound quality design.

8. Warranty and Support

JKSWT is committed to providing high-quality products and customer satisfaction.

  • Customer Service: If you experience any dissatisfaction after receiving or during the use of your JKSWT Wired Earbuds, please contact our customer support team. We are dedicated to assisting you in resolving any issues.
  • Warranty Information: Specific warranty details may vary by region. Please refer to your purchase documentation or contact JKSWT customer support for detailed warranty terms and conditions.

For further assistance, please visit the official JKSWT website or contact your retailer.

© 2023 JKSWT. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.